Showing results: 4666 - 4680 of 11191 items found.
-
Shenzhen Tojoin Communication Technology Co., Ltd.
Attenuators are used in a wide variety of applications and can satisfy almost any requirement where a reduction in power is needed. Attenuators are used to extend the dynamic range of devices such as power meters and amplifiers, reduce signal levels to detectors, match circuits and are used daily in lab applications to aid in product design. Attenuators are also used to balance out transmission lines that otherwise would have unequal signal levels.
-
cPCIS-3300BLS -
ADLINK Technology Inc.
*PICMG® 2.16 Packet Switching Backplane architecture*Dual PICMG® 2.16 fabric slots for high availability*21 slots, including 12 node slots, two fabric slots, three redundant 6U CompactPCI® power modules and one CMM slot*Hot swappable 800 W + 400 W redundant CompactPCI® power supply with universal AC input
-
ADLINK Technology Inc.
The COM Express Type 10 Mini (84 x 55 mm, credit card size) module is intended for low power platforms (TDP 12W and below), capable of entry level processing with ultra-low power consumption, while supporting graphics and optimized I/O count for mobile applications. Type 10 modules are targeted at handheld devices (smart battery) for industrial, medical, transportation, and controllers for outdoor applications.
-
AutoBalance™ System -
Windrock, Inc.
Continuously adjusts fuel flow to each power cylinder to maintain balanced operationMinimize emissions and fuel consumption over a wide range of operating loadsReduce mechanical wear and maintenance costsReduce personnel costs and risk by eliminating manual engine balancingSupports engines with up to 20 power cylindersOn-Guard Diagnostic software for monitoring, analysis, reporting and trendingSupports automated air manifold pressure control for minimum emissions at varying loads
-
Mors Smitt Group
Are solid state voltage sensing relays with electromechanical output contacts built in a fully draw out case format. Designed for application on AC & DC voltage systems, these relays are ideally suited to monitor power supply voltage levels wherever high accuracy and reliable, maintenance free operation is essential. All power to operate the relays is derived from the sensed input voltage therefore an auxiliary supply is not required.
-
34980A -
Acery Technologies
34980A Universal Switch Module 34937A, 34938A can be used to send signals or control other devices in the application. The 34937A is a versatile universal switch with 28 channels capable of switching up to 1A. In addition, there are four can switch up to 5A of the A-channel. The 34938A has 20 5A channels of type A topology. Each type A general-purpose switch can withstand up to 150W of power per channel, suitable for power switching.
-
Q7-BT -
ADLINK Technology Inc.
The Q7-BT Computer-On-Module (COM) combines the Qseven® 2.0 standard with the Intel® Atom™ E3800 series System-on-Chip (SoC), providing an ideal solution for mid-range power and high, pin/area density requirements. The module provides the high integration, high performance, low power, and ruggedness favored by Internet-of-Things (IoT) applications such as retail transactional clients, digital signage, and in-vehicle infotainment systems.
-
Schneider Electric SA
Power quality measuring and monitoring with IEC 61850 communication. Vamp 96, Vamp 260 and WIMO 6CP10 measurement and monitoring units. VAMP measuring and monitoring units offer complete analysis of consumption and power quality monitoring in generation and distribution applications. The range, including VAMP 96, VAMP 260 and WIMO 6CP10 cover a number of functions such as measuring, calculations, transducer, alarm handling, information display and communication.
-
L-Series -
Hilkar
L-series inductive load banks are devices which contain inductive loads, apply the load to an electrical power source and dissipate the reactive power of the electrical source. L-series load banks are designed for portable and fixed applications. Hilkar brand L-series load banks have robust design and are specifically designed for corrosive environments. Load banks can be controlled via local, remote, wireless remote or automatic control systems.
-
CV5P350 -
Frothingham Electronics Corporation
The CV5 P350 station is the first mid power pulser in a series of exponential pulse generators that can be connected to an FEC200E tester. This gives you all the versatility of the proven FEC200 with the addition of high power exponential pulses. For exponential pulses up to the 10/1000, the CV5 P350 can produce up to 5KW, 500A, or 350V whichever is most limiting. It can also test all of the usual FEC200 tests in the same test program.
-
CH316 -
Lisun Electronics Inc.
• Measure 16 samples at the same time, evaluate and record the life of each sample. • Very flexible: Samples can be added and changed at anytime. • The life of each sample is readable at anytime. • The switch ON/OFF time is adjustable (Test period is min 1s). • Automatically remember the test result when the power is off, and resume the old measurement when power is on. • Sound and light alarm when the products were failed.
-
ROM-3420 -
Advantech Co. Ltd.
ROM-3420 RTX2.0 module integrates an ARM Cortex A9 Dual 1 GHz NXP i.MX6 series ultra low power SoC and I/O solution with Linux. NXP i.MX6 supports 2D, 3D graphics acceleration, and a full HD 1080P video decoding encoding hardware engine. ROM-3420 supports 5V~24V wide range power inputs and a wide temperature design for industrial applications.
-
72-10445 -
Tenma
The 72-10445 is a Clamp Power Meter Clamp with phase sequence. It measures active power (W), apparent power (VA), reactive power (VAr), power factor, phase angle and active energy (Wh) with built-in phase sequence test. Also measures AC current, AC voltage and frequency.
-
Intel Corporation
Get the essential features you need—from the data center to the network edge. Choose chipsets for extreme power and performance, for consumers and enthusiasts, or for the enterprise.
-
Shenzhen Setec Power Co., Ltd.
DC Utility Converter is used for utility power supply, which provides stabel DC output from DC input. It is DC Converter to DC.