Filter Results By:

Products

Applications

Manufacturers

Showing results: 466 - 480 of 622 items found.

  • In-Circuit ESR & DCR capacitor Tester

    236 - GME Technology

    This In-circuit ESR & DCR capacitor tester is designed to measure ESR (equivalent Series Resistance) on capacitors range from 0.47uF to 2200uF, in or out of circuit. The ability to trouble shoot in-circuit saves time and makes the 236 a must for anyone that tests or trouble shoots PCB (printed circuit boards).

  • 6TL-3X INLINE Header Conveyor 765 mm Length

    AQ580 - 6TL Engineering

    - PCB up to 600mm length 400 mm width- Programmable transfer speed up to 1 m/s- Automatic Previous/Next speed adjustment- 2D Code reader w/automatic positioning- Pre-wired for second 2D Code reader- Automatic width setting- PC for line management w/UPS with 20” monitor and keypad in adjustable position arm- 24 Ports PoE Switch- Power inlet rack with current protections and line safety relay- Top cover and door w/safety contacts inhibiting line modules while active- Mechanisms self-test- Width auto-adjustment and cyclic width- Non-contact electronic stop of the PCB- 4U Free on the 19” Rack- Interfaces SMEMA 9851 y IPC-HERMES 9852- CE certified

  • In-Line Flashing Station

    AR302 - 6TL Engineering

    The 6TL AR302 In-Line Flashing Station is designed with the most innovative numeric movement control technologies and ensures reliability and precision.With multiple flash programmer options, it offers a high PCB transfer speed and includes a stopperless system. Up to 40 devices in parallel can be programmed and no compressed air is required for operation.

  • Medium-Power Load Relays

    Series FS - Teledyne Defense Electronics Relays & Coax Switch

    Series FS relays are designed for medium-power loads. The relays incorporate a triac output and utilize optical isolation to protect the control from load transients. The package is available with faston or PCB terminals. The compact size of the FS makes it ideal for designs where space is limited and has excellent thermal performance. The Series FS relays are Zero-Cross SwitchingAvailable options include:FS24D10-06 10A, 12-280Vrms, 600Vpeak Load; 4-30Vdc Control; FastonFS24D10 10A, 12-280Vrms, 600Vpeak Load; 4-30Vdc ControlFS24D20-06 20A, 12-280Vrms, 600Vpeak Load; 4-30Vdc Control; Faston

  • ENA Vector Network Analyzer

    E5063A - Keysight Technologies

    2-port, 50 ohm, S-parameter test set Select the VNA frequency option that best suits your test needs and budget, and upgrade options at any time Boost efficiency and productivity with the consistent measurement framework of the industry-standard vector network analyzer Enhance your PCB manufacturing test capability with Option 011Easier operation with support for 6 languages via softkey & the embedded help manual in English/Simplified Chinese Every spec verified, adjustments included Lock in support & peak performance from the start

  • Reliability Test System

    STAr Technologies, Inc.

    STAr uses its extensive industry expertise to design, build, test and support reliability systems for semiconductor devices and interconnects reliability life test, IC product burn-in, environmental test, product screening, PCB reliability test, etc. to fulfill all the needs to build a solid reliability engineering system.

  • RF Coaxial Probes & Probe Positioner

    Fairview Microwave Inc.

    Fairview Microwave’s line of coaxial RF probes and RF PCB probe positioner are ideal for use with chip evaluations, signal integrity measurements, coplanar waveguide, substrate characterization, gigabit SERDES and test fixture applications. The RF coaxial probes provide return loss better than 10 dB and a maximum operating frequency of 20 GHz. The probes have a 3.5mm female interface, a pitch of 800 or 1500 micron and they can be cable-mounted. They feature gold-plated contacts and can be used by hand, with or without a probe positioner. Compliant coaxial GSG (or GS) pogo pins allow for a broad range of probing angles. The RF PCB probe positioner can hold coaxial probes, has articulated joints and delivers multi-axis positioner control. This positioner also boasts a magnetic mounting plate with on-off positioner switch.

  • Combination Board Testers

    QT2256-640 PXI - Qmax Test Technologies Pvt. Ltd.

    designed as a Combination Board Tester capable of testing highly complex and dense PCBs employing various test techniques on a single platform. It can perform Board Level Functional Test through edge connectors of a PCB, and guided probe diagnostics utility to reliably repair Digital/Analog and Mixed Signal PCBs of various complexities for conventional PCBs.

  • Deep And Sloped Pan Fixtures

    HW Test

    Line of deep and sloped pan fixtures for general purpose/system non-specific pcb test applications. H+W Test Products manufactures test fixture products for in-circuit, functional and combinational testers for users of automated test systems (ATE) such as Aeroflex, Agilent (HP), Checksum, Factron, Teradyne (GenRad), Test Research (TRI) and Testronics.

  • Flipper

    H71007100 - 6TL Engineering

    Easy operator access for loading and unloading the DUT, thanks to the flip operation performed by the Flipper module. Combined test (Hipot, ICT & Funcional) Rack&stack module for 19 inch frame 6 U height (266,7 mm 10.5”) Pushing force up to 900N (more than 400 needles @2N) Power supply 230V 50-60 Hz. Compressed air not required High dynamics and precission CNC servocontroller PCB areas up to 232x358mm. Bigger areas available under request. Interchangeable cassette for upper bed of nails or actuators

  • ITC Style VXI Module Shield Kits

    ICS Electronics

    * Box design for C-size ITC style PC Boards with 11 slots on their sides.* Pre-machined flat front panel with ejector handle cutouts.* Side shields include 0.375 inch wide vent slot on top and bottom sides for maximum cooling.* Shroudless design fits all VXI chassis.* Each kit includes side shields, front panel, ejector handles, two ejector face places with VXI and ICS logos, all hardware and assembly instructions.* Complimentary layout support includes PCB design template and CAD layout files.

  • Test Fixtures & Jigs

    Yelo Ltd.

    A test fixture or test jig is the component containing the bed of nails used for testing the PCB or assembled product. It is powered and controlled by the Yelo Testpoint system which has test cards capable of providing multiple test conditions. This system also controls the probes used in the bed of nails, and relays test information back to the Testpoint system to be analysed.

  • AC Filament Switching and Line Relays

    Mors Smitt Group

    *Heavy duty Elkonite contact tips*AC and DC versions available*AC versions available with or without internal rectifier PCB*Automated vision system and operator inspection*Comprehensive automated end of line testing*Test Certificates supplied with each relay*Certificate of Conformity supplied with each order*Recertification and repair services available

  • DC Filament Switching and Line Relays

    Mors Smitt Group

    *Heavy duty Elkonite contact tips*AC and DC versions available*AC versions available with or without internal rectifier PCB*Automated vision system and operator inspection*Comprehensive automated end of line testing*Test Certificates supplied with each relay*Certificate of Conformity supplied with each order*Recertification and repair services available

  • Manual Test Press Fixture

    750/752 Series - Robson Technologies, Inc.

    RTI's manual test presses are compact, portable, all-inclusive, and easy to use. Single lever operation and 100% vertical compression makes the manual test press an ideal solution for PCB, hybrid module, and high pin count device-level testing when complex test requirements cannot be met with a test socket and breakout board alone.

Get Help