Showing results: 1276 - 1290 of 1891 items found.
-
DH-PT -
Teledyne LeCroy
Teledyne LeCroy’s DH series 8 to 30 GHz differential probes offer the combination of bandwidth, input range and offset capability to address any high-speed probing requirement from debugging serial data interfaces to validating DDR memory systems. DH series probes provide superior loading characteristics and are calibrated with a custom “fine-tuned” frequency response. The ultra-low loading and flat frequency response ensure accurate measurements.
-
DLAP-4000 Series -
ADLINK Technology Inc.
- NVIDIA® Quadro® PEG card support- 8th/9th Gen Intel® Core™ i7/i5/i3 processor- Dual SODIMMs for up to 32GB DDR4 non-ECC memory (dependent on CPU)- 1x DVI, 1x HDMI, 1x DP (from CPU), additional display outputs from PEG cards- 1x Mini PCIe slot for Wi-Fi/Bluetooth or LTE module- 300W/500W Flex ATX PSU
-
GX2482 -
Marvin Test Solutions, Inc.
The GX2482 series are a high performance, dual differential channel, 16-bit digitizer offering high dynamic range and excellent SFDR. The module’s differential inputs, coupled with its low distortion makes it an ideal instrument for analyzing high performance or low level analog signals. Each channel offers 3 selectable low pass filters, a 16 bit, 180 MS/s ADC, and 64 M words of memory for each channel.
-
ASMB-825 -
Advantech Co. Ltd.
- ATX Server Board with dual Xeon Scalable processors- DDR4 2933 MHz RDIMM up to 768GB, support Intel Optane DC Persistent Memory- Four PCIe x16 slots (Gen3) and two PCIe x8 (Gen3)- Intel® X557-AT2 dual 10GbE ports- Eight SATA3.0 and one M.2 connectors (SATA / PCIe compatible)- 0 ~ 40 °C ambient operation temperature range
-
Extech 412400 -
Extech Instruments Corporation
The Extech 412400 Multifunction Process Calibrator sources and measures thermocouples (J, K, and T), mA, mV, and V devices. The 24 V loop supply drives current loads up to 1000 ohms. It has memory for 5 user-settable output values of each type for fast calibrations. Single and continuous step function for voltage and current. Comes complete with six AA batteries and a calibration cable with spade lug terminals.
-
RX100 -
Renesas Electronics Corp.
The RX100 Series is the RX Family's entry-level 32-bit MCUs with excellent cost performance and ultra-low power consumption. It delivers a max. of 32MHz CPU operation with 8 to 512KB of embedded flash memory. In addition it features cutting-edge peripherals like capacitive touch and LCD drive as well as USB. The RX100 Series can be used for system control or user interface applications systems such as healthcare devices, home appliances, office equipment, and measuring equipment.
-
Saint2 -
DG Technologies
Testing Interfaces for Multiple Simultaneous Serial Busses Extensive On-board Memory Capacity High-performance Infineon Micro-controller RS-232 and USB Interfaces for Communication with a Host Computer SAINT2 Hosts Software for Your PC User-configurable DB-25 Cable Optional Discrete I/O Add-on Daughter Board System Applications Product Development, Testing and Software Re-flash in One Device Bus Monitor 2 Message Filtering, Scripting, Emulation and Logging Scrolling Message Monitor SAINT Bus Engine Provides Open API for Software Applications Interfaces with USB/RS232 Create Your Own Plug-ins
-
PHT-1840 -
Phase II Plus
This dedicated unit is designed to test gear teeth and other difficult to access applications. The 1840 is loaded with the same features found on the base 1800 version which includes memory, USB output and software for downloading to your PC. The 1840 hardness tester is capable of measuring the surface hardness of a broad variety of metals on flat and round surfaces. This instrument comes complete with a dedicated DL impact device, calibrated test block and rugged carry case.
-
Extech RH490 -
Extech Instruments Corporation
Anyone whose job relies on calculating humidity levels will appreciate the Extech Hygro-Psychrometer. In addition to measuring relative humidity in 30 seconds, this handheld instrument captures dew point, wet bulb, temperature and water vapor levels (Grams per Kilogram and Grains per Pound). This utility tool will store maximum and minimum readings until the memory is cleared and includes a data-hold button for rapidly fluctuating measurements. Complete with carrying case and 9V battery.
-
Mach-NX -
Lattice Semiconductor
*Up to 8.4K LC of user logic, 2669 kbits of user flash memory and dual boot flash feature*Up to 379 programmable I/O supporting 1.2/1.5/1.8/2.5/3.3 I/O voltages*Secure enclave supports 384-bit cryptography, including SHA, HMAC, and ECC*Configuration of PFR and security functions through Lattice Propel simplifies developer experience*Highly reliable. Low power and 3X better SER performance to comparable CMOS technologies
-
iWave Systems Technologies
iWave’s PCIe based FPGA Processing / Acceleration Card is a half-length PCIe x4 card featuring a high-performance user-configurable Xilinx® Kintex®-7 FPGA enhanced with high-speed memory and a high-throughput serial interface. Front I/O adds dual SFP ports, 1x HDMI1.4a IN, 1x HDMI1.4a OUT. All of these features combine to make the card ideal for a wide range of applications such as Edge Computing, ARINC818 Avionics Video Bus, Acceleration.
-
4235 ER -
Standard Electric Works Co., Ltd
● Microprocessor-controlled.● Earth resistivity (ρ) test.● Earth testing at 20Ω, 200Ω, 2kΩ.● Earth voltage measuring : 0-300V AC.● Automatic C spike check.● Automatic P spike check.● 2-Wire test, 3-Wire test, 4-Wire test.● LCM display.● Auto ranging.● Auto power OFF.● Data hold.● 200 measurement results can be saved in the memory and recalled on the display.● Interval between auxiliary earth spikes is 1.0~50.0m.
-
ROM-3310 Development Kit -
Advantech Co. Ltd.
*Evaluation kit for ROM-3310*Lower power TI sitara AM3352 1GHz processor*On board DDR3 512MB memory / 4GB Flash*HW WDT for system protection*Supports 1 GbE, 1 USB 2.0, 1 USB 2.0 OTG, 2 CANbus, 10 GPIO, 4 UART,1 I2C, 1 I2S, 1 SPI, 1 SDIO*Cable pack & Panel included*Evaluative image & test utilities built-in
-
FW2 -
North Atlantic Industries
The FW2 provides IEEE 1394 (Firewire) high-speed serial communications. The module is provided with a direct PCIe interface to the local (on-board) processor, or, an external host processor for board platforms that support external PCIe connectivity. These module(s) are not supported with the classic memory register-based NAIBrd Software Support Kit (SSK) API libraries. These communication function modules support device control and management via standard native OS (Linux) FireWire device driver.
-
Shanghai MCP Corp
1GSa/s sampling rate. 2 or 4 channel mode . 8 inch wide rectangle color LCD with WVGA(800x480) resolution. Waveform capture rate up to 50,000wfms/s. Memory depth 28Mpts per channel. 1mV/div~20V/div wide range. 256 level intensity grading. 65,000 frames for waveform record and replay. Support serial bus trigger and decoding. Interface: USB Host, USB Device, LAN, AUX out