Showing results: 1156 - 1170 of 1889 items found.
-
603B -
B&K Precision Corporation
The 603B handheld battery capacity analyzer tests 6 and 12 volt sealed lead acid batteries with capacities up to 100 ampere hour (Ah). Test results include voltage, state of charge, and internal resistance. This analyzer also features a built-in USB port and internal memory to store battery information, test configuration, and measurement results for up to 50 batteries.
-
PCI-1553DDC-2 -
ALPHI Technology Corporation
The PCI-1553-DDC-1/2 implements a complete single channel dual-redundant MIL-STD-1553 bus terminal on a half size PCI Card. Full BC/MT/RT modes are supported. 0°C to 70°C operating temperature is standard. Included is an DDC Enhanced ACE intelligent communications protocol engine, dual transceivers and encoder / decoders, shared memory, and management logic.
-
PXIe3110 -
VX Instruments GmbH
The PXIe3110 is the most compact andpowerful 3U one-slot embedded controller forthe PXI Express and CPCIexp platform. With itshuge and future-ready interface capabilities,it runs perfectly with most test and measurementapplications.The Controller is driven by a 7th generationIntel® Core™ processor combined with up to32 GB DDR4 memory and easily supports highbandwidth applications with its PCIe Gen3system and storage interconnectivity.
-
N2115A -
Keysight Technologies
The N2115A DDR4 BGA Interposers are soldered in between the DRAM and PC board or DIMM raw card where the DRAM would normally be soldered. They are designed with the PCB or DIMM foot print on the bottom side and the DRAM footprint on the top side. The signals from the memory controller chip and DRAM are then passed directly to the top side of the BGA probe adapter where they can be accessed with the oscilloscope probes.
-
TM263 -
T&M Tools Limited Co
◇ Self Calibration◇ Set the Auto Off◇ Wavelength Memory function after turn off the tester◇ High Accuracy, high ,High sensitivity, high linearity◇ Stable VFL Output◇ USB Charge port◇ FC,SC Connector◇ 18650Li-ion Battery◇ Lower power consumption design, long standby time◇ Rubber Out shell, increased the protective properties for field work
-
DMC-41x3 -
Galil Motion Control, Inc.
The DMC-41x3 motion controller is one of Galil's latest generation, stand-alone motion controller. Compared with the DMC-21x3 controller, the DMC-41x3 offers the following enhancements: 100BASE-T Ethernet, aux RS232 port, USB port, uncommitted analog inputs, up to 15 MHz encoder frequencies, more program memory, and faster sample frequencies. The DMC-41x3 also accommodates the same stepper and servo motor drives used in the DMC-40x0 series and allows two 4-axis 750 W drives to be installed in the 8-axis controller package. The DMC-41x3 is available as a box-level or card-level motion controller. The unit operates stand-alone or interfaces to a PC with Ethernet 10/100BASE-T, or USB. It includes optically isolated I/O in addition to analog inputs and outputs. The DMC-41x3 controller and drive unit accepts power from a single 20-80 VDC source.
-
MANO500 -
Axiomtek Co., Ltd.
The MANO500 is based on the new 14nm 7th/6th generation Intel® Core™ i7/i5/i3 and Pentium® processors in the LGA1151 package. Featuring the new Intel® H110 Express chipset with DDR4 2133MHz memory support, this motherboard is built to perform. Its three SATA 6G ports, four USB 3.0 ports, and two RS-232/422/485 ports provide robust storage and I/O options. Users also can increase board functionality with PCIe x16 slot and PCI Express Mini Card slot. The high quality MANO500 allows the connection of up to four display interfaces via HDMI, VGA, DisplayPort, and LVDS/ Embedded DisplayPort (eDP), making it an ideal solution for gaming, workstation, digital signage, medical and other IoT&M2M applications.
-
OPS500-501-H -
Axiomtek Co., Ltd.
The OPS500-501-H is an OPS compliant digital signage player supporting dual displays with 4K at 60Hz resolution. The smart cableless open pluggable digital signage module is powered by the latest 7th/6th generation Intel® Core™ and Celeron® processors (codename: Skylake) with the Intel® H110 chipset, providing outstanding performance at a lower cost. It supports LGA1151 socket-type CPUs to offer greater flexibility for CPU selection. In addition, the OPS signage module has one 260-pin DDR4-2133 SO-DIMM socket with up to 16 GB memory capacity. The high-performance OPS500-501-H is a perfect solution for multi-display applications in airport information board, shopping mall, corporate, education, hospitality, religious organization, bank, retail store, restaurant, performing art center, and many more.
-
Model T750 -
Teledyne Advanced Pollution Instrumentation
The Model T750 is a portable, microprocessor based calibrator for precision gas analyzers. Using highly accurate mass flow controllers combined with compressed sources of standard gases, calibration standards are provided for multipoint span and zero calibrations. The T750 is housed in a high-density, molded travel case which includes an integral handle and wheels for durability and ease of use in the field.The Model T750 can be equipped with an optional UV ozone generator for accurate, dependable ozone calibrations, and production of NO2 when blended with NO gas in the included, internal gas phase titration (GPT) chamber. An optional photometer allows even more precise control of the ozone generator giving accurate and dependable ozone calibrations and enhanced GPT. A number of calibration sequences may be programmed into the non-volatile memory of the Model T750, covering time periods up to a year.
-
VPX3010 -
ADLINK Technology Inc.
The VPX3010 Series is a 3U VPX processor blade featuring the Intel® Xeon® Processor D-1500 SoC with up to 12 cores. The VPX3010 provides up to 16GB DDR4-2133 dual channel ECC memory soldered onboard, one PCI Express x8 Gen3 XMC expansion slot with VITA 46.9 rear IO, and onboard soldered 32GB SLC SATA solid state drive. Rear I/O via P1 and P2 includes 2x 10GBASE-KX4, 2x 1000BASE-T (or one 1000BASE-T and two 1000BASE-BX by BOM option), 2x SATA 6 Gb/s, 1x USB 2.0, 2x USB 3.0, 6x GPIO, VGA, 1x RS-232, 1x RS-232/422, and up to PCIe x16 Gen3 supporting non-transparent bridge for peer-to-peer communication (dependent on BOM option).
-
Dalian Taijia Technology Co.,Ltd
Display: 10mm (0.4″) LCD (Liquid Crystal Display)● Function: LP , Leq ,LN.● Frequency range: 31.5Hz~8kHz● Measurement range: LP:30~130dB (A) 35~130dB (C) 35~130 dB (F) Leq :30-130dB LN .: 0-100%● Resolution: 0.1 dB● Accarcy:1dB● Memory: Maximum value (30groups)● Indicator: Low battery indicator● Alarm: electron● Connector:RS232C● Power supply: 4x1.5v AAA (UM-4 battery● Size: 236 x 63 x26 mm● Weight: 170g (including batteries)● Standed delivery:1.Main Unit................1pc2.Carrying Case............1pc.3.Operation Manual.........1pc.● Optional Accessories:1.ND9 sound level meter calibrator2.RS-232 and software3.External rela4.Bluetooth interface
-
CAPA842 -
Axiomtek Co., Ltd.
The CAPA842, fanless 3.5-inch embedded board, is equipped with the newest 22nm Intel® Celeron® processor quad core J1900 (2.0GHz) or dual core Celeron® N2807 (1.58 GHz). The CAPA842 supports high bandwidth DDR3L-1333 SO-DIMM with memory up to 8 GB. Designed with fanless ultra-small form factor, the CAPA842 has excellent temperature tolerance for used in extremely harsh environments. With integrated Intel® Gfx graphics engine, up to 854MHz in turbo, this ultra-small 3.5-inch embedded single board computer provides completely new visual experiences, including faster media processing, full HD over HDMI, and spectacular HD playback, etc. Moreover, its multiple display outputs of HDMI, LVDS and VGA support dual views.
-
Ki-Pro -
Murraypro Electronics
Murraypro offer a cost effective Ki-Pro* Monitoring Unit. Specifically designed to provide Field Monitoring and mains powered operation for Client's Ki-Pro Recorders in Mobile and 'Fly Away' Applications. This popular and robust 2 U rack mount frame firmly supports AJA’s Ki-Pro* Field Recorder, giving a choice of two mounting positions. A ‘low profile’ format which aligns the Recorder’s front panel flush with the frame; whilst the other, where space permits, offers enhanced accessibility to the memory module with the ‘Pro mounted 15mm proud of the rack front. Either mounting position in the Monitor's chassis allows unrestricted access to the rear panel of Ki-Pro* for the external A+V cabling, with ample exhaust clearance provided for the Ki-Pro's* internal cooling fan.
-
Extech Oyster-10 -
Extech Instruments Corporation
Exclusive Oyster Design can be used in the lab or in the field. Large LCD built into adjustable “flip-up” cover displays pH or mV and Temperature simultaneously. Splash proof housing and front panel tactile touch pad to slope and calibrate. Rugged design for handheld or benchtop use; neckstrap for “hands-free” operation. Measures pH (0.00 to 14.00pH), mV (-999mV to 999mV) and Temperature (32.0°F to 212.0°F /0.0°C to 100.0°C). Accurate to 0.02pH, 2mV, 0.8°F/0.5°C and resolution of 0.01pH, 1mV and 0.1°. Memory function stores and recalls 25 labeled readings. Min/Max storage and recall, °C/°F switchable. Audible beeper to alert user when function is completed. Automatic or Manual temperature compensation. Probe sold separately.
-
OPS700-520 -
Axiomtek Co., Ltd.
The OPS700-520 is an Open Pluggable Specification Plus (OPS+) digital signage player. The high-performance signer player is powered by the high-performance LGA1151 socket 8th generation Intel® Core™ i7/i5/i3 and Celeron® processors (codename: Coffee Lake S) with the Intel® Q370 chipset. This OPS+ digital signage module supports Trusted Platform Module (TPM) 2.0, Intel® Active Management Technology (Intel® AMT) 11.0 as well as Intel Unite® solution for content sharing and collaboration. It comes with two 260-pin DDR4-2400 SO-DIMM sockets that can provide system memory of up to 32GB. The Coffee Lake S-based OPS700-520 offering future-proofed flexibility and performance is among one of the most advanced and powerful digital signage players in the market.
