Filter Results By:

Products

Applications

Manufacturers

Liquid

freely flowing substance.

See Also: Viscometers, Liquid Level


Showing results: 706 - 720 of 841 items found.

  • Fiber Acceptance Test Kit

    23005 - Norland Products, Inc.

    The unique design of the splice accommodates either 125um or 140um fiber and any size buffer up to 900um. The precision made splice holder firmly holds the pigtail in position without causing stress on the fiber. The low viscosity index matching liquid has an indefinite shelf life and allows for an easy glide of the bare fiber into the splice. Within seconds, a fiber acceptance reading can be made with an OTDR or test set. Low loss with minimum back reflection can easily be achieved for more accurate signatures. Other applications for this kit: splice training aids, bare fiber adapters, and temporary splicing.

  • Sound Level Meters

    HD 8701 - Delta OHM S.r.L.

    The sound level meter HD 8701 is a portable instrument, easy and quick to use, suitable for measuring industrial and civil noise levels. The noise levels can be read easily in dB (A) on the large liquid crystal display which also shows all the information concerning the mode of operation of the instrument. One second after switching on and with a resolution of 0.1 dB, the digital reading gives the continuously updated value of the RMS sound pressure level, with a type A frequency weighting. The single range from 30 to 130 dB further simplifies the use of the instrument, as the user does not have to change scale.

  • Averaging Pilot Tubes

    Meriam Process Technologies

    Meriam manufactures the widest range of Averaging Pitot Tubes for gases, liquids and steam with bi-directional flow capability. Under the Accutube brand name, there are four standard models; Inline, Insertion, Flanged and Wet Tap which can provide a flow solution for your toughest applications. To provide the complete flow solution that meets your specific needs, we can provide DP or Multivariable transmitters from the brand of your choice, or we will recommend the best fit for your application. These transmitters can be installed on the Accutube and configured to your specific flow requirements here at Meriam by qualified technicians, reducing your expense and time .

  • Oscilloscope

    PDS-8012 - KILTER ELECTRONIC CO.,LTD

    Bandwith 100~200MHzSample rate ups to 1GS/s the real-time2 or 4 channels numerals save, each channel has 1GS/s sample rateCursor read-out function. Five automatic surveys FunctionsRegulator back light resolution, high contrast gradient colored liquid crystal displayRS232 correspondence portMany kinds of profiles opration function oprationDigital real time oxcilloscopeDouble time baseDifferent continues the demonstration timeProvides the multi-languages user connection to raise the user optionallyEstablishment and profile storage/Assigns out.Provides the fast establishment the automatic hypothesis functionA profession ideal tool for design, maintenance and examination

  • Galvanic DO Sensor

    Model 20 - Reliant Water Technologies

    The Model 20 Galvanic DO Sensor utilizes proven galvanic sensing technology – without a question the most accurate and reliable DO sensing technology ever developed. The pure platinum cathode makes the sensor incapable of being poisoned by other gases often found in impure waters, such as hydrogen sulfide. This sensor utilizes the only DO sensing technology that is successful in continuous de-nitrification monitoring and control applications. It is also the only sensor design that can be used continuously in very violent pure liquid oxygen injection systems. Complete systems are supplied with over 5 years of sensor electrolyte and membranes.

  • Spectrometer Systems

    FLAME-CHEM - Ocean Optics, Inc.

    FLAME-CHEM spectrometers are fully integrated UV-Vis and Vis-NIR systems for measuring absorbance and transmission of liquid samples in cuvettes. FLAME-CHEM is a great option for teaching labs and research facilities where users seek the performance and flexibility advantages of the Flame spectrometer in a compact, small footprint instrument. Each FLAME-CHEM system comprises a preconfigured Flame spectrometer, a direct-attach light source and a cuvette holder for 1 cm pathlength cuvettes – all in a single package. UV-Vis (200-850 nm) and Vis-NIR (350-1000 nm) models are available. Add OceanView spectroscopy software (purchased separately) to complete your system.

  • Hydrometer

    HX-5056 - HuiXia Supply Co., Limited

    Model: Three colorful scales alcohol hydrometer HX-5056 Brix range:0-35 Alcohol range: 0-25% Density: 0.99-1.160 Length: 28cm Gross weight: 55g/ piece Product Description: This hydrometer HX-5056 has three colorful scales : brix, alcohol and density directly to measurethe alcohol content of distilled alcohol or spirits. It is calibrated to give a direct reading of actual alcohol content and the density of the liquid. Features: Three measuring scales : brix, alcohol and density First-class quality and high accuracy Light weight and easy to handle and calibrate It is very useful for wine brewing

  • flow monitors

    B3000 Series - Badger Meter

    The B3000 Series flow monitor from Blancett provides a flexible, durable, easy-to-use platform for flow metering applications. The B3000 monitor makes it easy to track flow, with a crisp dot-matrix display capable of simultaneous display of flow rate and flow total. With a wide variety of enclosure options for both liquid and gas applications, from intrinsically safe and explosion-proof (flameproof) ratings, to an innovative solar-powered model, there''''s a B3000 monitor to suit your needs. Available instrinsically safe models are housed in a UV-resistant, NEMA 4X-rated enclosure available in direct, panel, pipe, DIN-rail and swivel mounts.

  • Dielectric Breakdown Voltage and Dielectric Strength

    ASTM D149 - National Technical Systems

    This test method covers procedures for the determination of dielectric strength of solid insulating materials at commercial power frequencies, under specified conditions. Unless otherwise specified, the tests shall be made at 60 Hz. However, this test method is suitable for use at any frequency from 25 to 800 Hz. At frequencies above 800 Hz, dielectric heating is a potential problem. This test method is intended to be used in conjunction with any ASTM standard or other document that refers to this test method. References to this document need to specify the particular options to be used. It is suitable for use at various temperatures, and in any suitable gaseous or liquid surrounding medium. This test method is not intended for measuring the dielectric strength of materials that are fluid under the conditions of test. This test method is not intended for use in determining intrinsic dielectric strength, direct-voltage dielectric strength, or thermal failure under electrical stress (see Test Method ASTM D3151). This test method is most commonly used to determine the dielectric breakdown voltage through the thickness of a test specimen (puncture). It is also suitable for use to determine dielectric breakdown voltage along the interface between a solid specimen and a gaseous or liquid surrounding medium (flashover). This test method is similar to IEC Publication 243-1. All procedures in this method are included in IEC 243-1. Differences between this method and IEC 243-1 are largely editorial. Note: The above information is taken directly from the test method Scope published in ASTM D149.

  • Vapor Source Mass Flow Controller With Viscous Laminar Flow

    MKS Instruments

    The 1152C Vapor Source Mass Flow Controller is a pressure-based measurement and control system designed to meter and control vapor from low vapor pressure liquid and solid sources directly, without the need of a carrier gas. The 1152C consists of a fixed flow element and two capacitance manometers for flow measurement, with a proportioning solenoid control valve for flow control.

  • High Voltage Inclined Plane And Erosion Tester

    SCR ELEKTRONIKS

    SCR ELEKTRONIKS have developed HIGH VOLTAGE INCLINED PLANE AND EROSION TESTER to carryout test specified in many standard to cover test method for the evaluation of the relative tracking and erosion resistance of insulating solid using liquid contaminant (ASTM D2303). Perform the Initial Tracking Voltage Test, Time to track Test, And Erosion Test as per selection.

  • Pressure/ Vacuum Sensors

    Premier Electrosystems

    There are three different types of pressures that can be measured using Premier Electrosystems' Pressure Sensors: Gauge, Absolute, and Differential. Gauge pressure is the pressure measured relative to the ambient atmospheric pressure.A typical application for a gauge pressure sensor is to measure liquid levels in a vented tank using the difference in hydrostatic pressure and ambient atmospheric pressure. Absolute pressure sensors will give the result relative to zero (a perfect vacuum). This is useful in applications where there is a direct effect of altitude on the pressure being measured. Differential pressure sensors measure the difference in pressure between two points. Differential pressure sensors are often used to monitor airflow in HVAC applications.

  • Metal Tube Float Flow meter

    F56 - Beijing Airport Beiguang Instruments Co., Ltd

    F56 Metal Tube Float Flow meter Series are used for measure instantaneous and accumulated flow rate of liquid, gas and steam in closed pipelines. It is suitable for metering flow value on site or electronic remote. The measuring principle is based on the hydrodynamic effects,This makes float moving from bottom to top in vertical Pipe. As the displacement of float is in related to flow rate, which can be read from the indicator by means of the magnetic drive system in non-contact form . Also, flowmeters output electrical signal (4-20)mA / hart communication protocol with high / low limit Warning switches/integrating flow PCB broad can be configured.

  • Electronic Moisture Analyzer

    MOC-120H - Shimadzu Corp.

    The moisture content of a variety of samples can be measured using an array of drying modes. The drying status can be seen at-a-glance with the fluctuation range display. Active in a variety of fields (cereals, starch, flour, noodles, brewed products, sea foods and marine products, meat products, spices, sweets, dairy products, dried foods, vegetable oils and other food articles; pharmaceuticals; ores; cokes; glass materials; cement; chemical fertilizers; pulp and paper; cotton; various fabrics and other industrial goods); enabling measurement of samples (cereals, foods, and chemical products) under various conditions (powder, particles, paste, and liquid).

  • Colorimeters

    PCE Instruments

    A colorimeter is a valuable color-measuring tool used by manufacturers, printers, painters, designers and quality control professionals. Colorimeters ensure accurate, consistent color, eliminating issues related to color subjectivity. Depending on the model, PCE Instruments' colorimeter products can measure colors in different color spaces such as CIE LAB, XYZ, LCh, RGB and LUV (for liquids and solids / that is why you can choose the media via filter selection). The most popular colorimeter models in our range of color-reading products are the PCE-CSM series colorimeters. Aside from being easy to use and economical, the PCE-CSM series colorimeters offer high degrees of accuracy.

Get Help