Showing results: 631 - 645 of 1238 items found.
-
183 CB -
Standard Electric Works Co., Ltd
Cable Tracer● Trace wires or cables.● Volume control.● Tip & Ring identification.● 2 bi-colored LEDs ( Line 1 & Line 2).● Tone speed selection : Fast & Slow.● A phone jack is designed for headset or handset. (Amplifier probe)Phone Tester● Continuity and resistance testing for voltage-free objects.● Check direct and alternating voltages.● Testing capacitors.● Testing diodes.● Power ON/OFF switch.● The indication of the LED lamp and the sound of the buzzer can occur at the same time.● The LED indication for Power ON status.
-
BTD-34 -
Hutz Auto & Air Nanjing Ltd.
Battery Load Tester LED Digital , Capacity of battery:36Ah~160Ah, Rated test voltage:12 v, Voltage accuracy:+/- 0.1 v, Test cycle:10 seconds
-
BTD-26 -
Hutz Auto & Air Nanjing Ltd.
Battery Load Tester LED Digital , Capacity of battery:160 AH, Rated test voltage:12 v, Voltage accuracy:+/- 0.2 v, Test cycle:10 seconds
-
BTD-21 -
Hutz Auto & Air Nanjing Ltd.
Battery Load Tester LED Digital , Capacity of battery:160 AH, Rated test voltage:12 v, Voltage accuracy:+/- 0.2 v, Test cycle:10 seconds
-
BTD-31 -
Hutz Auto & Air Nanjing Ltd.
Battery Load Tester LED Digital , Capacity of battery:36Ah~160Ah, Rated test voltage:12 v, Voltage accuracy:+/- 0.1 v, Test cycle:10 seconds
-
PCI-7250/7251 -
ADLINK Technology Inc.
ADLINK's PCI-7250/7251 provide 4-CH SPDT (Form C) & 4-CH SPST (Form A) relay outputs and 8-CH isolated digital inputs. The status of each relay output is represented by an onboard LED. When the relay is in SET condition, its corresponding LED will turn ON, and on the contrary, it is OFF. All digital input channels are nonpolarity, optically isolated, and may be set to use RC filter or not. The devices are suitable for collecting digital inputs in noisy environments. The PCI-7251 is an 8-CH relay outputs and 8-CH isolated DI extension card of the PCI-7250. All the I/O functions of PCI-7251 are the same as those of the PCI-7250. The PCI-7251 has to be connected with PCI-7250 and the bus interface is controlled by the PCI-7250. Up to three PCI-7251 cards can be connected to one PCI-7250, therefore, expanding the PCI-7250's DIO from 8 DIO to maximum 32 DIO.
-
PW-7033 -
PINTEK Electronics
*Portable type, small size design*Overload protection*3 sets output: 0~32V/0~3A x 2 + 5V/3A*Parallel: 0~64V/0~3A or + 32V ~ -32V/0~3A*Series: 0~32V/0~6A*3 digits, 4 sets LED display, Green is display for voltage, Red is display for current, easy to read, no mistakes.
-
Aquid Chart -
Adaptica Srl
Aquid Chart is an advanced ophthalmic chart designed to work with Aquid. It is available in two configurations: Aquid Chart 24’’ and Aquid Chart Mobile – the former is a professional FULL HD LED Monitor dedicated to all eye-care experts, and the latter is a portable eye chart for vision professionals who want to go wherever their patients are. In addition, they are both compatible with VisionFit SC
-
FM1 -
NG Systems Ltd
This unit will allow fine adjustment of overall focus of a CCTV camera, especially useful whenever a monitor is not available. It operates by analysing the detail in the centre of the picture and provides a 10 bar LED readout, displaying maximum output when the camera image is in sharpest focus. An input impedance switch provides selection between terminated (75Ω) and unterminated (high impedance) input.
-
Reveal Series -
Seek Thermal
Powerful and rugged in design, the standalone Seek Reveal combines high-resolution thermal imaging, a long-lasting rechargeable battery, and a large color display in one durable device. And when you need it, Reveal's powerful 300-lumen LED light is available at the touch of a button. You can count on its durable, rubberized casing and intuitive controls to go to work where you do.
-
LSG-1800B -
Lisun Electronics Inc.
LSG-1800B Goniophotometer is automatic goniophotometric instrument for luminous intensity distribution measurements with facility for turning the light source. The LSG-1800B use a constant temperature detector, Japanese Motor and Germany precision angle coder which keeps high test accuracy. It is for industrial laboratory measurements the photometric data of luminaries such as LED luminaries, HID lamps, fluorescent lamps and so on.
-
iFL -
Opti-Sciences, Inc.
The iFL is the first instrument of its kind to provide leaf absorptance measurement, first to offer white LED lighting that allows chloroplast migration to occur, first to offer humidity control above ambient, first to offer "walk-away automation", first to offer automated post-processing for the Laisk protocol, the Kok protocol, the Yin protocol and the Flexas chamber leakage protocol.
-
LiFli -
Fauser Elektrotechnik
The LiFli light flicker meter enables fast evaluation of light sources on the flickering part (flicker / flicker). Especially in the case of LED lamps, the flicker portion can be determined only by one measurement, since it is in the range of 0% to 100% for these luminous means.Audio features enable the flicker to be reproduced acoustically. A voltage output for further analysis by means of oscilloscope or voltage analyzer is available.
-
post5a -
PC Engines Gmbh
miniPCI format to fit WRAP boards and most modern notebook PCs. During power on self-test (POST), most PC BIOSes will write diagnostic codes to port 80h or port 84h (auto select, whichever is written first). Use post5a to display these codes on a dual digit LED display. Additional LEDs indicate the status of the power supply rails.
-
post5a1 -
PC Engines Gmbh
MiniPCI format to fit WRAP boards and most modern notebook PCs. During power on self-test (POST), most PC BIOSes will write diagnostic codes to port 80h or port 84h (auto select, whichever is written first). Use post5a1 to display these codes on a dual digit LED display. Additional LEDs indicate the status of the power supply rails.