Showing results: 2656 - 2670 of 4983 items found.
-
MATRIX-F -
Bruker Optics
The advantages of real time, on-line FT-NIR analysis have been well established. However, conventional spectrometers can only be installed close to the process that they are monitoring, which makes the analyzer be exposed to a hostile environment, like drastic temperature changes and exposure to dust and dirt. Furthermore, the instrument needs to be positioned in hard-to-access and often Ex-protected area.
-
PCChost 1420 -
Sycard Technology
Based on Texas Instruments' PCI1420 CardBus host adapter chip, the PCChost 1420 PCI-to-CardBus bridge provides the engineer with a platform to evaluate a high performance ACPI compliant CardBus bridge device. Contained on a single Peripheral Component Interconnect (PCI) bus card, the PCChost 1420 is compatible with a wide variety of PC and non-PC PCI hosts.
-
Marposs S.p.A.
Marposs offers solutions and equipment that make your machine tool an instrument of unprecedented precision, productivity and reliability. Touch probes and laser-based tool setters hold the cutting process accuracy in check. Our balancing actuators and many dedicated sensors guarantee that your machine tool's functional processes never deviate from their specified set points.
-
MC-1000 -
Martel Calibrators
The MC-1000 Process Calibrator provides high accuracy calibration, common DMM functions including read and source thermocouples, RTDs, Ohms, current, pressure, frequency and test continuity. This single calibration instrument will calibrate virtually any process device including: read and source thermocouples, RTDs, Ohms, Voltage, Current, Frequency, Pressure, and test continuity.
-
QOAL400 -
Applied Test Resources
The QOAL400 module is a precision instrument capable of measuring all common parameters of an Op Amp, including AC as well as DC parameters. The QOAL400 has four completely independent channels, which allow a quad device to be tested in a minimum amount of time. Each channel has a full set of resources to measure all common parameters.
-
310104437 -
Virginia Panel Corporation
The 9025 is a 25 module receiver designed to fit into a standard 19" rack. It is equipped with a locking handle to ensure proper ITA engagement. An included integrated microswitch shuts off power when the ITA disengages from the receiver. This receiver is designed to work with a slide kit, includes mounting flanges and an instrument bracket. A slide kit is required, but not included.
-
310104402 -
Virginia Panel Corporation
This 50 module receiver is designed to fit into a standard 19” rack. It is equipped with a locking handle to ensure proper ITA engagement. A standard integrated microswitch shuts off power when the ITA disengages from the receiver. This receiver is designed to work with a slide kit and includes mounting flanges and instrument brackets. A slide kit is required for use, but not included.
-
Laurel Electronics, Inc
Remote and Large Digit Displays, as defined in this web page, are numeric displays that are driven by a serial signal from a computer, programmable controller, or other instrument. Digit heights can range from 0.56" (14.2 mm) to 11.0" (280 mm). Laureate remote displays, with a digit height of 0.56", are similar to a digital panel meter or counter in appearance.
-
Fluke Calibration
The 27 GHz 96270A and 4 GHz 96040A Low Phase Noise Reference Sources are designed specifically for RF calibration, featuring a calibration-oriented interface, precision signal level and attenuation, high signal purity and precision low distortion modulation. Both instruments simplify the process of RF calibration by reducing the amount of equipment and simplifying the calculations required.
-
GEM Advanced Magnetometers
Many magnetic observatories today rely on a combination of scalar, fluxgate and theodolite instruments for obtaining measurements. Research installations engaged in volcanology applications are also using scalar magnetometers for stationary work. GEM?s Overhauser GSM-90 EUROMAG is particularly suited to these applications (and volcanology). This is a standard magnetometer without a display screen that can be operated via computer.
-
TiePie engineering
The Serial analyzer sink decodes analog data on a serial bus to serial data. It can be used to monitor and analyze RS232, RS485, MIDI, DMX or other compatible serial buses. The serial analyzer can monitor up to eight sources. When these sources are in sync (all sources are of one (combined) instrument), all captured data will be displayed in chronological order.
-
PenScopeDAQ -
RK-System
Digital oscilloscope PenScopeDAQ is a single-channel instrument with maximum frequency of sampling 100MHz and resolution 8 bits. PenScopeDAQ is realized in pen-type housing. Connected to the USB cable PenScopeDAQ doesn't require an external power supply - it enables the user to use this tool in any design, service or automotive measuring tasks. This device is also offered with BNC connector.
-
Core Technology Group
The Circuit Sleuth API Tool Kit routines offer an alternative solution for users who prefer writing or need to write their own control programs, or have specific application needs for frequency response analysis. The “C” callable routines and DLLs provide direct access to the analyzer, enabling the user to control instrument functions and data management.
-
DNA -
Larson Davis, Inc.
Data, Navigation and Analysis (DNA) Software: can be used to display and control measurement data on a PC in real time, while maintaining access to all of the instruments measurement and analysis functions it is interfacing with. The DNA software package was developed to integrate and support all types of a variety of measurements from Analyzers, Human Vibration Meters and Sound Level Meters.
-
HyperWare-II -
Logic Beach Inc.
HyperWare-II™ (HW-II) is a powerful multi-purpose software package for use with the Logic Beach Network Enabled IntelliLogger and the IL-Mini data logger data logging instrument families. HyperWare-II™ is the next generation icon-based data logging software built upon the original industry-preferred HyperWare program and contains all the functions required for configuration and use of the IntelliLogger.