Filter Results By:

Products

Applications

Manufacturers

Inspection

check and evaluate to a quality control value.

See Also: Inspection Systems, Inspection Services


Showing results: 601 - 615 of 1390 items found.

  • Emissions Dynamometers

    MD-100-CM-2WD - Mustang Dynamometer

    High throughput demands of Centralized Emission Inspection require the use of rugged and durable emission inspection equipment. Designed from inception to withstand punishing use and misuse, Mustang Dynamometer has set the performance standards of equipment manufactured and used worldwide for centralized emissions testing. Our pioneering experience has led us to be the world leader in the design and manufacturing of rugged inspection and maintenance hardware and software for the I/M industry. We have centralized testing lanes installed all over the world in climates from cold to hot and from wet to dry. By the end of 2020 we estimate that our equipment will have performed nearly 1 billion vehicle tests. Continuous improvement leads us to innovative solutions based on our knowledge of design, service, maintenance, ergonomics and overall functional capabilities. Mustang I/M Centralized Emission Inspection equipment is designed for our customer’s demands.

  • Emissions Dynamometers

    MD-100-M-2WD - Mustang Dynamometer

    High throughput demands of Centralized Emission Inspection require the use of rugged and durable emission inspection equipment. Designed from inception to withstand punishing use and misuse, Mustang Dynamometer has set the performance standards of equipment manufactured and used worldwide for centralized emissions testing. Our pioneering experience has led us to be the world leader in the design and manufacturing of rugged inspection and maintenance hardware and software for the I/M industry. We have centralized testing lanes installed all over the world in climates from cold to hot and from wet to dry. By the end of 2020 we estimate that our equipment will have performed nearly 1.5 billion vehicle tests. Continuous improvement leads us to innovative solutions based on our knowledge of design, service, maintenance, ergonomics and overall functional capabilities. Mustang I/M Centralized Emission Inspection equipment is designed for our customer’s demands.

  • Microelectronics And Packaging AOI

    Machine Vision Products

    Machine Vision Products, Inc. has extensive experience in a wide range of Microelectronics and Packaging applications. MVP works with the world’s leading manufacturers on a global basis. From multiple die and wire technologies to leadframe, ball grid array and surface inspection applications, MVP has the widest applications toolbox of any AOI provider. MVP takes pride in the fact that they supply many complex inspection solutions to diverse industries such as Automotive, Telecoms, Medical Devices, Military, and Space. MVP’s 900 Series is the base platform upon which all Microelectronics and Packaging inspection solutions are based. The 900 series 2D capabilities provide metrology and defect detection using a propriety Quad-Color lighting, Telecentric optics and resolutions down to 1um. 3D height measurement capabilities allow for in-line high speed inspection of Dies, paste deposition, positional accuracy, volume and height with a resolution down to 1.13um.

  • Emissions Dynamometers

    MD-ASM-100 - Mustang Dynamometer

    High throughput demands of Centralized Emission Inspection require the use of rugged and durable emission inspection equipment. Designed from inception to withstand punishing use and misuse, Mustang Dynamometer has set the performance standards of equipment manufactured and used worldwide for centralized emissions testing. Our pioneering experience has led us to be the world leader in the design and manufacturing of rugged inspection and maintenance hardware and software for the I/M industry. We have centralized testing lanes installed all over the world in climates from cold to hot and from wet to dry. By the end of 2016 we estimate that our equipment has tested nearly 850 million vehicles. Continuous improvement leads us to innovative solutions based on our knowledge of design, service, maintenance, ergonomics and overall functional capabilities. Mustang I/M Centralized Emission Inspection equipment is designed for our customer’s demands. Compliant with EPA, BAR, and CENAM ASM specifications.

  • Real Time X-Ray Imaging

    GO-SCAN C-VIEW - Teledyne ICM

    Go-Scan C-view is a light weight ruggedized real time X-ray imaging system specifically designed for hand-held inspection such, among other, Corrosion Under Insulation (CUI) inspection. It includes a high speed and high resolution CMOS imager and a battery-operated 70kV x-ray tube designed for portable field operation. The video imaging system captures images and displays them on a hand held display in real-time.

  • TOFD Ultrasonic Probe

    LIMBOTOFD™ - GB Inspection Systems Ltd.

    *Low Profile - Only 10mm high allowing easy access to previously inaccessible areas which are currently untestable using conventional TOFD transducers. *Reduces Inspection Cost - No need to implement other possibly disruptive inspection methods such as radiography. *High Signal to Noise - Single cycle responsiveness using 10/15 MHz. *Integral Wedge - Unique patent pending design providing convenient use without the need to change wedges and providing the assurance of the transducer/wedge couplant film. *Increases Productivity - With conventional TOFD, losing a transducer may result in the loss of the use of its dependent wedges and forcing the inspection to stop. LIMBOTOFD™ eliminates this risk.

  • Interface Connectors

    YOKOWO Co., Ltd.

    High durability Interface connectors do not damage the product, side terminal by a special mechanism, and do not lock, making it suitable for automated inspection.

  • Material Discrimination X-ray Technology

    MDX - Eagle Product Inspection

    Eagle’s Material Discrimination X-ray (MDX) technology enhances traditional x-ray inspection, providing food processors with unprecedented contaminant detection capabilities.

  • UT Flaw Detector

    Masterscan D-70 - Innerspec Technologies, Inc

    Masterscan D-70 UT flaw detector offers the inspector a fully capable and functional set of tools and software for inspection across all applications.

  • Portable Stroboscopes

    Rheintacho Messtechnik GmbH

    These extremely robust and precise hand-held stroboscopes are used to conduct measurements in difficult industrial environments and are specifically designed for maintenance work / commissioning and inspections.

  • Partial Discharges And Corona Effect Detection And Monitorization

    DIGAMEL Subestaciones

    Inspect electrical systems for discharge problems though a digital ultrasonict inspection, information, storage and retriveral system that´s versatile and easy to use.

  • Wireless Handset - Compatible with 4mm, 5.5mm, 5.8mm and 25mm Diameter Probes

    Extech HDV-WTX - Extech Instruments Corporation

    The HDV-WTX is a Wireless Video Transmitter. For use with any Extech HDV-Series Video Scope Camera Heads and HDV Series Videoscope inspection cameras.

  • Data Communications And Semiconductor Device Related Products

    NHK SPRING

    Using our original micro springs and MC probes, these are highly durable products that are also lead-free. It is used for inspection of finished semiconductor products.

  • Universal Offline AXI Systems

    AXI XT-6 Series - Nordson Corporation

    The XT-series provides the advanced inspection capability of Nordson TEST & INSPECTION's inline system in a smaller footprint manual load/island of automation system. The platforms are designed for flexibility and ease of use for a wide variety of products requiring 2D and 2.5D automated X-ray inspection. The XT-6/XT-6A platform is a highly flexible automated X-ray inspection system with minimum footprint and a parallel-kinematic Hexaglide manipulation unit for extreme-angle off-axis image acquisition with high resolution. It is suitable for high-quality X-ray analysis of electronic assemblies and material analysis of parts that require flexible part manipulation with multiple inspection angles. For batch modes and volume inspection the XT-6 can be equipped with a single-sided conveyor setup and magazine load/unload station (XT-6A).

  • Profilometry

    Alkeria Srl

    Laser triangulation is a non-contact distance measurement technique widely employed for surface inspection applications.We've been working to develop a laser triangulation extension, to provide our customers a fast and reliable solution for their measurement and quality inspection issues. Our Optical Profilometer extension enhances the robust and flexible platform of our standard cameras: you can get all the quality of Alkeria cameras, along with all brand new functionalities!

Get Help