Fuse Test

Showing results - of 13 products found

  • APCI-1564 - Digital Input and Output Board

    Company: Team Solutions

    32 bit, 33 MHz, PCI interface Input channels 32 isolated digital input channels, 24 V, incl. 16 interruptible and 3 fast counter inputs Input channels organised in 4 groups of 8 channels, each group has its own ground line Voltage reversal protection All inputs are filtered Output channels 32 isolated digital output channels, 10 to 36 V Output current per channel 500 mA Watchdog for resetting the outputs to "0" After power/ON the outputs are reset to ì0î Short-circuit current for 16 outputs ~ 3 A Short-circuit current for 32 outputs ~ 6 A Short-circuit current per output ~1.5 A Electronic fuse Overtemperature and overvoltage protection 24 V power outputs with protection diodes and filters Special output capacitors minimise electromagnetic emissions External 24 V supply screened through a protection circuitry Shutdown logic when the external supply voltage drops unter 5 V Safety features Optical isolation 1000 V Creeping distance: 3.2 mm acc. to DIN VDE 0411-100 Protection against fast transients (burst), overvoltage, electrostatic discharge and high-frequency EMI Interrupt triggered through watchdog, counter, timer, error Separate grounds for input and output channels Noise immunity Test level: ESD: 4 kV Fields: 10 V/m Burst: 4 kV Cond. radio interferences: 10

  • Hi-Tech HTP-7P Kit - Circuit Detective 90-280VAC Circuit Breaker Finder

    Company: Hi-Tech Electronic

    Plug the UL-listed transmitter into an outlet on the circuit you want to locate...up to 280 volts. Also works with the screw-in plug adapter included for light fixtures. Go downstairs and run the receiver's tip over the breakers or fuse rows until the arrow illuminates and the speaker beeps. That's the breaker or fuse you want. Includes bare-wire lead adapter to check exposed wiring too. Won't trigger ground fault interrupters. Manual/automatic off. Foam-fitted storage case. 9v battery..

  • Non-Contact Voltage Testers

    Company: Peaceful Thriving

    1. Test electrical lines, cables, sockets, fuses, switches and more… 2. Checks for proper ground connection of electrical appliance. 3. LED will glow if AC voltage is present. 4. Operates by two LR44 1.5V batteries.

  • MI 3101 - Multi-Functional Testers

    Company: AVOX Technologies

    This instrument is equipped with a number of unique features including “All-in-one” installation safety testing, integrated characteristics of fuses and RCDs (including B type), and 10-level memory structure. All the results can be quickly saved and referenced on the instrument and then downloaded via the EuroLink PRO software to the computer for evaluation and report generation after testing. The MI 3101 performs continuity, insulation, RCD, loop, line, voltage, frequency, earth resistance testing and phase sequence tests required by the EN 61557 standard.

  • DEL-101 - Multi-purpose Tester

    Company: Standard Electric

    Mains wiring polarity check.● ELCB/RCD testing.● Measuring ear for line current.● Measuring ear for leakage current.● Helps calculate insulation resistance.● Helps calculate power consumption.● Helps fault finding of standing earth fault.● Fused main adapter.● Appliance testing (with the aid of a clamp meter).● Fused appliance socket.● No batteries required.● HRC fuse inside.● Fused, color-coded universal test sockets.● Universal mains IEC Lead.

  • MI 3102 BT - Multi-Functional Testers

    Company: AVOX Technologies

    It supports AUTO SEQUENCE ® testing of the TN, TT and IT earthing systems. ISFL measurements and the IMD tests can also be performed. The MI 3102 BT EurotestXE enables on-line voltage monitoring, phase sequence testing, earth resistance measurement, illuminance measurement and TRMS current measurement. EurotestXE is equipped with integrated characteristics of fuses and RCDs for PASS / FAIL evaluation of test results. All the results can be quickly saved and referenced on the instrument and then downloaded via the EuroLink PRO software (included in the standard set) to the computer for evaluation and report generation after testing.

  • MI 3102H BT - Multi-Functional Testers

    Company: AVOX Technologies

    Apart from all the necessary functions for complete installation safety testing according to IEC/EN 61557, it enables diagnostic test by PI and DAR indexes calculation. Also, the MI 3102H BT EurotestXE 2.5 kV allows on-line voltage monitoring, phase sequence testing, earth resistance measurement, illuminance measurement and TRMS current measurement. EurotestXE 2.5 kV is equipped with integrated characteristics of fuses and RCDs for PASS / FAIL evaluation of test results. All the results can be quickly saved and referenced on the instrument and then downloaded via the EuroLink PRO software (included in the standard set) to the computer for evaluation and report generation after testing.

  • 9101DB - Multi-Purpose RCD and Appliance Tester

    Company: Shanghai Beihan Electronics

    Multi-Purpose RCD and Appliance TesterModel: 9101DBFeatures:• Mains wiring polarity check.• ELCB/RCD testing.• Measuring ear for line current.• Measuring ear for leakage current.• Helps calculate insulation resistance.• Helps calculate power consumption.• Helps fault finding of standing earth fault.• Fused main adapter.• Appliance testing (with the ad of a clamp meter).• Fused appliance socket.• No batteries required.• HRC fuse inside.• Fused, color-coded universal test sockets.• Universal mains IED Lead.

  • 77001 - Polarity Circuit Tester

    Company: Gunson

    This tool tests the polarity instantly, locating short circuits without wasting fuses and finds bad ground/earth contacts. Test polarity without connecting jumper wires. Tests include: Cooling fans, window regulator motors, electronic fuel pumps, relays, lamps etc. Computer safe for use around sensitive engine management systems

  • Micro-ohmmeters

    Company: Ndb Technologies

    This product line contains several products to measure very low resistance. In fact, the DRM micro-ohmmeter can be used to measure very low resistances which vary from 0,01 micro ohm to 200 ohms. Our products can be used for quality control of protective ground assembly, control of mechanical joints, electrical connections, quality control of smelting parts, for inspection of contacts, circuit breakers, power fuses and more.

  • 5080 - ADVANCED BATTERY POWERED PAT

    Company: Transmille Ltd

    Get your safety testing off to a rapid start with the new concept in portable appliance testing. Transmille has redefined PAT operation for the ultimate in speed and simplicity of use. Pressing the CLASS 1 button sets the 5080 to automatically sequence through a visual check, fuse check, earth bond resistance, insulation resistance and leakage current test for each appliance.

  • PP219FTC-RED - Power Probe

    Company: Power Probe

    With the press of a switch you''ll have an instant hot lead or ground lead. Use the probe tip and ground lead simultaneously to power up components right in your hand. Instantly check continuity as well as identify positive, negative and open circuits without re-polarizing hook-up clips. Locate shorts without wasting fuses. The 20 ft. lead allows you to test bumper-to-bumper without jumper leads.

  • 69127 - Low-Voltage Tester

    Company: Klein Tools

    Device for checking live 6-24V, AC or DC circuits.Tests for shorts in automotive and truck electrical systems, motor field coils, radio and low-voltage circuits, ground circuit of all lamps, wiring, fuses, etc.Bulb in handle glows when circuit is complete (bulb included).Pointed 3-3/4'' (95 mm) probe makes checking easier.Deluxe 3.5'' (89 mm) long handle with nylon top holds replaceable bulb.36'' (914 mm) test lead with alligator clip.Replacement bulb: Cat. No. 69130