Filter Results By:

Products

Applications

Manufacturers

Force

exerts an influence.

See Also: Compression, Crimp Force, Pull Force, Pull off Force, Push Pull Force, Peeling, Tension


Showing results: 526 - 540 of 788 items found.

  • Motor Starting & Control Resistors

    Hilkar

    Motor Starting Resistors are used to reduce the voltage at the motor terminals and also decrease the starting current. Motor Starting Resistors are necessary because the self resistance of a motor armature is very low. When the voltage is first applied, excessive current will flow. For limiting this current, since there will be no resisting back electromotive force (emf),some series resistance can be added to the armature windings.

  • Precision Gram Load Cell Universal/ Tension or Compression

    GSO SERIES - Transducer Techniques, Inc

    The GS0 Series Load Cells can be utilized in tension or compression or both with excellent compliance. The force sensing end of the anodized aluminum GS0 Series is tapped 6-32 thru for attachment possibilities for almost any application. Bonded foil strain gages at the sensing element provide for excellent stability over the suggested temperature range and ensure long term reliability. Call for application assistance.

  • Quantum-Safe Security

    CN6000 Series - ID Quantique SA

    The Centauris CN6000 encryptors may be upgraded to quantum cryptography through the addition of the Cerberis Quantum Key Distribution (QKD) server to ensure that the solutions are quantum-safe for the long-term protection of sensitive data. This also ensures investment-protection of the encryptors. Such quantum cryptography is provably secure, ensures anti-eavesdropping detection and provides long-term forward secrecy against brute force hacking and attacks by quantum computers.

  • Snap-Action Switches

    Panasonic Automotive & Industrial Systems Europe GmbH

    based on a completely new type of contact system. By using sliding contacts, an extremely high overtravel of 2.5mm is achieved at optimum contact force, which greatly simplifies the installation and adjustment of the turquoise stroke switch. Furthermore, the ASQ turquoise stroke switch is bounce-free and hysteresis-free. Thanks to its IP6K7 protection class, it is ideally suited for a great variety of industrial and automotive applications.

  • Temperature, Humidity, Pressure, and Tri-Axial Shock Data Logger

    UltraShock-EB - MadgeTech, Inc

    The UltraShock-EB is a battery powered, stand alone temperature, pressure, humidity and 3-axis shock data logger which offers a battery life of up to 60 days typical. The UltraShock measures and records data for temperature, pressure and humidity at user selectable reading rates, while shock/acceleration data is sampled at 512Hz and at the user-specified reading rate, writes the peak acceleration (g force) to memory.

  • Board-to-FPC Connector for 5G Millimeter-Wave Antenna Modules

    Panasonic Industrial Devices Sales Company of America

    Panasonic's Board-To-FPC Connector for 5G Millimeter-Wave Antenna Modules offer good SI/EMI/EMS characteristics for high-frequency applications and features our industry-leading Tough Contact construction that achieves high contact reliability and retention force. Tough against shock impact by misalignment, the fully-shielded structure in both socket and header significantly improves EMI characteristics necessary for RF applications such as 5G.

  • Break-Over Wrenches

    MTBN - Mountz Inc.

    The MTBN is a preset production torque wrench with flexibility to adapt to different fastening applications as it is compatible with different head options. The unique break-over mechanism, provides an operator ample time to react once the target torque is reached and to stop applying any additional force to the fastener. Break-over torque wrenches improve control of the fastening process by reducing the risk of both over and under tightening.

  • AFDXEnd System Rugged (P14 Rear-I/O)

    TTTech Computertechnik AG

    The AFDXEnd System Rugged is equipped with two 10/100/1,000 Mbit/s Ethernet P14 rear-I/O ports running at full-duplex speeds. The conduction-cooled design of the board enables operations under the harshest conditions: withstanding forces up to 40G, vibrations of 2,000 Hz and temperatures of up to +85 °C while remaining fully operational at an altitude of 18,300 m (60,000 ft).

  • TTEEnd System A664 Rugged (P14 Rear-I/O)

    TTTech Computertechnik AG

    The TTEEnd System A664 Rugged is equipped with three 10/100/1,000 Mbit/s Ethernet P14 rear-I/O ports running at full-duplex speeds. The conduction-cooled design of the board enables operations under the harshest conditions: withstanding forces up to 40G, vibrations of 2,000 Hz and temperatures of up to +85 °C while remaining fully operational at an altitude of 18,300 m (60,000 ft).

  • 4- Channel PXI Source Measure Unit (SMU)

    GX3104 - Marvin Test Solutions, Inc.

    The GX3104 is a precision 3U PXI module that forces and senses both voltage and current over a range of ±20 V and up to ± 1 A ( channel 1) with channels 2- 4 capable of supplying up to 500 mA. Total available output current from the module is 1A. The four channels are electrically isolated from the PXI power supply and share a common, isolated ground.

  • Signal Conditioner

    ClipX - HBM, Inc

    Fast and digital signal conditioning for force sensors, load cells, torque sensors, pressure transducers, as well as temperature and standardized signals (current/voltage). Guaranteed measurement accuracy, even in harsh industrial environments with electrical interferences.

  • Pull Out Device

    BCL-1 - Lisun Electronics Inc.

    This Pull out device BCL-1 is designed and manufactured according to relevant standard requirements of IEC884-1/ GB2099.1-2008 and other electrical accessories standards, Mainly used to test the needed maximum force when the plug pull out from socket and the minimum force when single stage plug pull out from socket, and to inspect whether the socket can withstand the lateral stress imposed by electric plug into the socket. This device is applied to plugs and sockets which rated voltage no more than 250V and rated current no more than 16A.Specifications: • Weights: 36N*1, 5.4N*1, 5N*2, 4N*1, 2.6N*1; • Standard testing plug: each one for Dipolar 10A, tripolar 10A and 16A • Standard test bolt: Each one for 1.5N and 2N • 1 set of clamping device • 1 set of Weights tray • Lateral stress weights 5N*1 • 1 set of lateral stress bar

  • Universal Tensile Testing Machines

    Dongguan Amade Instruments Technology Co., Ltd

    Universal tensile testing machines are testing equipment that are used to conduct mechanical testings of static load, tensile, compression, bending, shearing, tearing, stripping, applied to plastic sheets, pipes, tapes, rubbers, electric wires, springs, sponges, fibers etc. Tensile test is performed to measure and analyze the physical performances of different types of materials and finial products, playing an important role in developing new materials and controlling products quality. From the perspective of function, universal tensile testing(UTM) machine is an omnipotent instrument Just as the name implies. Clamps or fixtures are interchangeable on the basis of different test pieces, enabling various testings to be carried out on one tensile testing instrument. Options of single-column stand or twin-column stand can be available based on the specimen’s tensile/compressive force and dimension. Computerized tensile tester is preferred rather than microprocessor version If users want testing results including curve graphics between time, force and displacement.

  • Decelerometer

    Maschinenbau Haldenwang GmbH & Co. KG.

    National type approval by the PTBPrinter with keyboard and digital displayFast matrix printer with graphic expressionPiezoelectric decelerometersControl and measurement electronicsElectrical equipment adjustment by means of digital displayGyro sensor for automatic compensation of the measurement error by the pitch behavior of the vehicleJacks for pedal force, pressure u. Load indicatorRS-232 interface to PC with data transfer for standard table SoftwareChargerSpare roll of paper approximately 15 mplastic suitcase

  • Rope Tension Meter

    RTM - Gigasense

    The PIAB RTM Rope Tension Meter is very simple and handy to use. Simply hold and “clip” it to the rope to be tested and use the large hand screw to deflect the rope to a fixed angle. The resultant force will affect the load cell and measure the tension in the wire rope. The resultant signal is digitally processed and displayed in a selected pre programmed graduation. The PIAB RTM 20D can be graduated in kN, klbs or in ton.

Get Help