Showing results: 511 - 525 of 788 items found.
-
MA 2012/D/H/GR2270/71 -
INGUN Prüfmittelbau GmbH
Parallel contact stroke: 15 mmContact force max.: 2000 NInterface block required: NoInterface signals max.: 1190Component on PCB: 58 mmPressure frame unit-opening angle: 75Installation height test probe top: 16,0 mmInstallation height test probe bottom: 10,5 mmInstallation height dual-stage test probe bottom: 16,0 mmweight: 17,00 kg
-
MA 2012/D/H -
INGUN Prüfmittelbau GmbH
Parallel contact stroke: 15 mmContact force max.: 2000 NInterface block required: NoInterface signals max.: 1190Component on PCB: 58 mmPressure frame unit-opening angle: 75Installation height test probe top: 16,0 mmInstallation height test probe bottom: 10,5 mmInstallation height dual-stage test probe bottom: 16,0 mmweight: 15,50 kg
-
M2 Series -
ELMA Electronic, Inc.
Optima's M2, Military and Seismic Ready Cabinets have been lab and field tested to insure that mission critical equipment remains up and running during harsh deploment events. The M2's double walled extrusion offers the highest strength-to-weight ration design avaiblabe and protects the equipment during the full force of a seismic or other shock/vibration event.
-
OSRVT™ -
Textron Systems
The One System® Remote Video Terminal (OSRVT™) delivers full-motion video, images and critical geospatial data from a variety of sources directly to the warfighter’s fingertips. Today, we are delivering the next-generation OSRVT to U.S. Army, Marine Corps and Special Operations Forces customers, equipped with bidirectional capability, upgraded software architecture and a more user-friendly interface.
-
4B Components Ltd.
The Touchswitch is an electro-mechanical limit switch with no moving parts, which detects tracking and misalignment problems on bucket elevators and conveyors. When a belt misaligns or a pulley moves over and contacts the sensor, the built in solid-state electronic circuitry detects the lateral force of the belt or pulley and activates a voltage free relay contact. This relay contact is used to immediately alarm and shutdown the machine.
-
Insight Scientific
This is the fully automatic semiconductor probe assembly and test equipment. It features ultra high precision in assembly process and the intelligent inspection of the finished products. This product is one of the most technologically advanced equipment by international standards in this industry and been exported to North America.Key Features: ● Assembly Precision:15um ● UPH:720 ● Visual Inspection included ● Spring Force Test
-
E-Labs, Inc.
E-Labs has an extensive background in the development and testing of Less Than Lethal (LTL) devices. We were the first to develop a measuring system to capture blunt force or impulse of a round in real time. The Ballistic Impulse Measuring System (BIMS) developed by E-Labs was used on USMC programs to evaluate LTL rounds and compare impulses on a one to one basis.
-
Partica Centrifuge CN-300 -
HORIBA, Ltd.
With a measurement range of 10 nm - 40 μm, the Partica CENTRIFUGE CN-300 applies centrifugal force of up to 30,000g and uses temperature control to produce accurate measurement results for a variety of samples.Developed based on customer feedback and improving upon existing and new HORIBA technologies, the result is an analyzer that provides safe and reliable operation while also being easy to use.
-
HV -
Xi'an Multipower Technic Co.,LTD
Before the delivery, the high-voltage breaker should be run in to ensure every breaker with the good mechanical characteristics. The running-in switchgear shall be wiped off the burr of the component by the mutual force and frictions in the no-load operations to amend its shape and to achieve the best cooperation among the components. The concept of running-in has been the mutual understanding of the international leading switchgear manufacturers.
-
ARES-G2 -
TA Instruments
The ARES-G2 is the most advanced rotational rheometer for research and material development. It remains the only commercially available rheometer with a dedicated actuator for deformation control, Torque Rebalance Transducer (TRT), and Force Rebalance Transducer (FRT) for independent shear stress and normal stress measurements. It is recognized by the rheological community as the industry standard to which all other rheometer measurements are compared for accuracy.
-
Torontech Group
Impact tests are used to measure the resistance to failure of materials to a suddenly applied force. The test measures the impact energy, or the energy absorbed prior to fracture. ToronTech™ offers advanced Impact testing machines to measure that energy through drop weigh tear test and Charpy impact test. We also offer machines for the preparation of specimens for these tests.
-
EST-20 -
Technopark Automation & Control
The EST-20 is an industry standard Compression Load Cell that can also be used in tension. This load cell can be supplied with load button and cup as well as ball and cup mounting options and is typically used on high capacity silos, hopper scales, batching systems, platform scales, force measurement and tension measurement applications. It is available in capacities from 1 ton to 50 ton.
-
Type 82C -
REINHARDT System- und Messelectronic GmbH
contact pressure up to 2,000 N, working area: 480 x 320 mm. Shift: 26 mm, dimensions: 65 x 64 x 44 cm, weight: 27 kg. Manual test fixture (sloping working area) with twin interface. Use with a REINHARDT-test system with expansion rack. 4 posts guiding. Toggle lever for force transmission. Maximum guiding precision and compression force. Typically more than 1,000.000 closures. Righthanders and lefthanders use it without difficulties. Ergonomically sloping working area. Fatigue-proof operation.
-
WIT Co., Ltd
It is a simple and convenient item that allows you to search for and replace the test probe at the same time. With needle-nose pliers, when pulling out a pin in a narrow space, excessive force was applied, which could damage the adjacent pin or widen the hole diameter. With our original pulling tool that supports the minimum pitch, you can easily pull out without damaging the adjacent pin.
-
PacketMicro Inc.
A digital or traditional optical microscope can help engineers check on their high-speed probing activities much more easily. It will assure the probe tips will touch on the right contact(s), with correct contact angle and right amount of force. We use both digital and optical microscopes in our own lab. The information in this page is to help you choose a microscope best suits you.