Filter Results By:

Products

Applications

Manufacturers

Display

illuminates image signaling.


Showing recent results 2941 - 2955 of 3494 products found.

  • ADSL / 2 / 2+ Handheld VoIP Tester

    QuickTest 500 - Vonaq Ltd

    *Rapid Testing. The QuickTest 500 ADSL2+ Tester's automatic Service Verification Test Suite starts as soon as you switch on (results are typically obtained in less than 3 minutes)*Simple to use. Virtually no product training required with QuickTest 500 ADSL Tester*Configurable Pass / Fail Indicators on the LCD display and clearly presented in multi-colour LEDs on the front panel*No need to get a laptop out*Save and name up to 16 test results at any one time*Line Voltage LED indicates poor, missing or excessive Line Voltage*ADSL/2/2+ Test LEDs to indicate if ADSL Showtime achieved*In Service LED indicates problems with PPP or IP layer*LEDs to indicate problems with the Trained Line Rate, poor Noise Margin or excessive Line Attenuation

  • Analogue (1kV below) Insulation Tester

    1132 IN - Standard Electric Works Co., Ltd

    ● High quality Taut Band movement.● Three insulation test voltages(DC) : 250V, 500V, 1000V.● Two continuity test on low ohms :  3Ω & 500Ω.● Compact and lightweight.● AC voltmeter with linear scale up to 600 Vac.● 200mA continuity short circuit current.● 1mA test current on insulation test at nominal voltage.● Automatic discharge of capacitive and inductive circuit with charge stored in the circuit under test.● Live warning and display or external voltage presence.● Fuse, air gap, crowbar and overload protected.● On line battery monitoring shows if battery is ok.● Manual zero ohm adjustment.● Low battery consumption.● Mirror scale.● Push and turn locking switch for continuous and hand free testing.● BS 16 edition.

  • Analogue (1kV below) Insulation Tester

    1652 IN - Standard Electric Works Co., Ltd

    ● High quality Taut Band movement.● Three insulation test voltages(DC) : 250V, 500V, 1000V.● Two continuity test on “low ohms” : 3Ω & 500Ω.● AC voltmeter with linear scale up to 600 Vac.● 200mA short circuit current for continuity.● 1mA test current on insulation test at nominal voltage.● Automatic discharge of capacitive and inductive circuit with charge stored in the circuit under test.● Live warning and display of external voltage presence.● Fuse, air gap, crowbar and overload protected.● On line battery monitoring shows if battery is ok.● Manual zero ohm adjustment.● Low battery consumption.● Mirror scale.● Push and turn locking switch for continuous and hand free testing.● Supplied with high quality test leads.

  • Analogue (1kV below) Insulation Tester

    8031 IN - Standard Electric Works Co., Ltd

    ● High quality Taut Band movement.● Three insulation test voltages(DC) : 250V, 500V, 1000V.● Two continuity test on “low ohms” : 2Ω & 20Ω.● AC voltmeter with linear scale up to 600 Vac.● 200mA short circuit current for continuity.● 1mA test current on insulation test at nominal voltage.● Automatic discharge of capacitive and inductive circuit with charge stored in the circuit under test.● Live warning and display of external voltage presence.● Fuse, air gap, crowbar and overload protected.● On line battery monitoring shows if battery is ok.● Manual zero ohm adjustment.● Low battery consumption.● Mirror scale.● Push and turn locking switch for continuous and hand free testing.● Supplied with high quality test leads.

  • Analogue (1kV below) Insulation Tester

    8052 IN - Standard Electric Works Co., Ltd

    ● High quality Taut Band movement.● Three insulation test voltages(DC) : 250V, 500V, 1000V.● Two continuity test on “low ohms” : 3Ω & 500Ω.● AC voltmeter with linear scale up to 600 Vac.● 200mA short circuit current for continuity.● 1mA test current on insulation test at nominal voltage.● Automatic discharge of capacitive and inductive circuit with charge stored in the circuit under test.● Live warning and display of external voltage presence.● Fuse, air gap, crowbar and overload protected.● On line battery monitoring shows if battery is ok.● Manual zero ohm adjustment.● Low battery consumption.● Mirror scale.● Push and turn locking switch for continuous and hand free testing.● Supplied with high quality test leads.

  • AUTOMATED TEST STAND DESIGN

    DMC, Inc.

    Automated test systems may be as simple as a laptop with a DAQ module or a stand-alone controller, but they typically require a mix of off-the-shelf and custom hardware. All that hardware is integrated and wired into a test stand. Portable or mobile test stands are ideal for in-the-field research and development and servicing of multiple laboratories or manufacturing lines. Test stand access to the front panels of hardware and subcomponents allows manual configuration of non-automated settings. Quick disconnects, cable harnesses, and easy access to probes provides efficient setup and tear-down. Expandable or modular rack mount and card base systems facilitate future needs. Ergonomic considerations include keyboard and display placement, along with number of monintors. Safety is always crucial with proper E-stop placement and keeping dangerous elements away from users.

  • Battery Analyzer

    KT-97C - KILTER ELECTRONIC CO.,LTD

    ● Battery ImpedanceRange: 60mΩ / 600mΩ / 6 Ω / 60Ω (auto-range)Accuracy: ±1.0% of reading ±3digits Resolution: 0.01mΩ● DCV Range: 6V / 60V (auto-range) Accuracy: ±0.8% of reading ±3digits Resolution: 0.001V●StorageCan storage 50 groups data (impedance and voltage) and veryconvenient for you to number the batteries for detection.●Connect to PC RS-232 interface ● Display impedance and voltage of battery together. ●Supplied with lithium batteries, it is very convenient to test outdoors and indoors.Application:● Measure the impedance of any type battery which voltage below 60V,identify the capability of batteries.●A perfect tool for batteries used in vehicle, emergency lighting, alarm,sprinkler systems, UPS devices, business security and any systemusing batteries to provide power, especially for lead-acid battery used in vehicle,electromotion car etc..

  • Beagle USB 480 Power Protocol Analyzer - Standard Edition

    TP323510 - Total Phase Inc.

    As USB devices continue to grow in number and complexity, developers need their monitoring and analysis tools to keep pace. The Beagle™ USB 480 Power Protocol Analyzer enables your competitive edge with its unique, powerful features and a price that is a fraction of competing equipment.The Beagle USB 480 Power Protocol Analyzer – Standard Edition enables VBUS current and voltage measurement within our industry-leading Data Center software. The enhanced USB 2.0 advanced triggering (an optional upgrade), extra-large hardware buffer, and one-click correlation of voltage and current measurement to protocol-level actively ensures that engineers can take advantage of our unique real-time data analysis and display, enabling them to easily debug the functionality of their embedded systems while also optimizing the power profile of their applications.Your product description goes here.

  • Beagle USB 480 Power Protocol Analyzer - Ultimate Edition

    TP323610 - Total Phase Inc.

    As USB devices continue to grow in number and complexity, developers need their monitoring and analysis tools to keep pace. The Beagle™ USB 480 Power Protocol Analyzer enables your competitive edge with its unique, powerful features and a price that is a fraction of competing equipment.The Beagle USB 480 Power Protocol Analyzer – Ultimate Edition enables VBUS current and voltage measurement within our industry-leading Data Center software. The enhanced USB 2.0 advanced triggering, extra-large hardware buffer, and one-click correlation of voltage and current measurement to protocol-level activity ensures that engineers can take advantage of our unique real-time data analysis and display, enabling them to easily debug the functionality of their embedded systems while also optimizing the power profile of their applications.

  • Beltronics International Units

    STiR Plus INTL - Beltronics

    The Beltronics STiR Plus INTL is the ultimate custom-fitted Stealth detector featuring unmatched performance along with GPS powered database of Speed and Safety camera locations in either the EU or Australia & New Zealand. The STiR Plus INTL features segmented Ka band for the ultimate in narrow-band detection, selectable band preferences (ON/OFF), expanded K band sweep. AutoScan and RDR (Radar Detector Rejection) make the STiR Plus INTL the quietest performance detector, immune from annoying false alerts. Includes Laser detection, Safety Warning System, Red LED display. Either English or Spanish warnings are selectable. Web ready with Defender database and three year subscription. The STiR Plus INTL has Laser Shifting capabilities with the addition of the optional Laser Shifting pack.

  • Class 2 Sound Level Meter

    SP79 - Martindale Electric Co. Ltd

    The SP79 is a Class 2 sound level meter for on-site measurements in accordance with Noise at Work legislation in industrial and office environments. Featuring A and C frequency weighting and fast and slow time weighting, the compact design can be handheld, or mounted on a tripod for longer term monitoring of Min / Max values. Detailed recording and analysis can be made using the AC and DC outputs. The SP79 complies with BS EN 61672-1:2003 and is supplied with a detachable windshield and hard carry case. The large high contrast display includes both digital reading and analogue bar graph. An optional Class 2 sound level calibrator is available to verify accuracy before and after readings in accordance with international standards. The SPC70 is simple to use and provides a 1kHz reference at 94dB and 114dB.

  • COM Express® Basic Size Type 2 Module with 4th Generation Intel® Core™ i7/i5/i3 Processor (formerly codename: Haswell)

    Express-HL2 - ADLINK Technology Inc.

    ADLINK"s Express-HL and Express-HL2 COM Express modules with 4th generation IntelR i7/i5 processor (codename: Haswell) - up to 3.1GHZ quad core - and mobile IntelR QM87 Express chipset offer up to 16GB dual channel DDR3L SDRAM at 1600MHz. The Express-HL is a COM Express Type 6 module offering three independent displays via DDI interface, as well as seven PCIe x1, one PCIe x16 (Gen3) for graphics (or general purpose x8/4/1), four SATA III (6 Gb/s), Gigabit Ethernet, four USB 2.0, and four USB 3.0 interfaces. The Express-HL2 features the COM Express Type 2 pinout and offers 18/24-bit single/dual channel LVDS, Analog CRT, and a legacy 32 bit PCI bus, as well as PATA IDE interface.

  • Controllers

    BKM93KIO - Techna-Tool Inc.

    Clockwise and/or counter-clockwise rotation of the wand is programmable allowing an optimum adaptation to the machine.The scanning intensity is adjustable in 8 steps. Even rotating drills with small diameters can be checked.The scanning results are display as "OK" or "KO" and signalled by LEDs on the front side of the device.The PROFIBUS is a standard Sub-D 9 pin connection; the USB connection is a USB-mini plug / type B and meets the 2.0 specification.Three digital inputs serve to activate the functions "Teach-in" to learn the position to be scanned, "Start" to initialize the scanning process and "Configurable" for receiving a stop command.Two digital outputs provide the signals for the message "OK" or "KO".The relay contacts are configurable as N/C or N/O connections. They can be set as momentary (valid with start or timed) or latching.Convenient configuration software for programming and setting of tool data is available at no cost.

  • Digital Clamp Meter

    KT7180 - Ketai instrument (kunshan) Ltd.

    *3 1/ 2 digit LCD display max.reading 1999 digits*Small and handy clamp meter series*AC current measurement up to 400A(±2.0% +5d)*AC voltage measurement up to 600V (±1.0% +5d)*DC voltage measurement up to 600V (±1.2% +25d)*Resistance measurement up to 20M ohms(±2.0% +5d)*Frequency range AC voltage measurement from 40Hz up to 200Hz*Data-Hold-Function*Temperature measurement max. to 1000 oC( 1832 oF) by using thermocouples K-type sensorsDiode and continuity test (acoustical signall)*Clamp opening:28mm*Power Supply:2x1.5V IEC LR03 AAA*Designed and built according to EN61010, CAT II 600VThose content above is detail information of [Digital Clamp me

  • Digital Power Meter (High Accuracy Model)

    LS2050 - Lisun Electronics Inc.

    LS2050 digital power meter is a new generation intelligent product which adopts digital sampling technology to analysis of the waveform. It has the following features: • Three windows digital display which reduces reading error, intuitive and convenient • Adopts high speed MCU and high precision A/D to control and measurement • All measured data as virtual value, also suit to signal waveform distortion • Fast test • Equipped with RS232 communicate function, can use upper computer software to carry on remote operation, control and read corresponding data, the test data and waveform could be displayed in the PC, Chinese and English operation interface, high intelligent instrument • This instrument provides two kinds of method to calculate total harmonic distortion (THD), IEC and CSA.