Filter Results By:

Products

Applications

Manufacturers

Data

elemental component of knowledge able to be processed.

See Also: Data Analytics, Analysis


Showing results: 5311 - 5325 of 8175 items found.

  • 6U CPCI D/S, S/D, I/O & Comm Board

    78CS2 - North Atlantic Industries

    NAI’s 78CS2 is a 6U cPCI Multifunction I/O and Communication Board designed for applications requiring Digital-to-Synchro/Resolver (D/S) stimulus output, as well as I/O and communication functions. This board contains five independent function module slots. The board can be configured for 10 D/S channels, or for D/S in combination with I/O and communication modules. Additional enhancements include FIFO data buffering for select modules. Using multiple DSPs, the enhanced motherboard enables higher processing power and dedicated pre-processing control for each module.

  • Silicon Drift Detector

    Octane Elite (SDD) Series - EDAX

    The game changing advancements in the Octane Elite Silicon Drift Detector (SDD) Series take detector technology to the next level. This line of detectors incorporates a new silicon nitride (Si3N4) window, which offers remarkable improvements in low energy sensitivity for light element detection and low kV microanalysis. The Octane Elite Series also uses the widely praised CUBE technology, which yields high speed X-ray data processing within a smaller and fully vacuum encapsulated detector device.

  • Inclination Tester

    tecsis LP

    As part of our Oil & Gas Series, tecsis LP now offers the Model LPI inclination sensor to measure inclination in the X, Y, or both X and Y directions (2-dimensional), used to measure the tilt angle of objects with respect to the horizontal. This unique sensor is useful as a safety component for measuring boom angle on construction cranes, platforms, and lifts. It also provides accurate data for leveling agricultural and commercial vehicles, monitoring drilling angles and derricks, or recording pitch and roll of ships.

  • Optical Clock Recovery

    8 Series - Tektronix, Inc.

    The 8 Series Optical Clock Recovery is a fast, flexible and reliable instrument for assisting in the validation of current and future optical designs. With all the applicable standard rates in the 26 and 53 GBd data rate ranges – no options required – the TCR801 Optical Clock Recovery is a crucial component for any bench or rack aimed at verifying the latest high-speed optical standards. Featuring quick lock capabilities and a sensitive front end for low power signals, this instrument simplifies the challenges associated with today’s optical testing.

  • Trace Extensions

    Lauterbach Inc.

    Trace based debugging adds a powerful set of features to complement and enhance your existing debug tools. Many modern devices include a trace port which is capable of providing real-time, non-intrusive information about program flow and data operations. This can be used to work out where code has been, how long things took, to analyze task switches, interrupts, and to generate code coverage reports. If you think of traditional debugging as a series of snapshots, then trace-based debugging is a video with timestamps.

  • Pressure Gauges

    PCE Instruments

    All of our pressure gauges are controlled by micro processors to guarantee the highest accuracy. They determine absolute pressure, negative pressure or differential pressure in air and liquids devices perfect for a research and development environment. At PCE, you can find a high-quality pressure gauge which is suitable for extreme operating environments and meets the highest industry standards. They can even be used in small places, little holes, tubes or pipes. Some pressure gauge series have the capability to transfer data to a computer, a printer or a storage device.

  • Diagnose Tool

    CANobserver - Gesellschaft für Mikroelektronikanwendung Chemnitz mbH

    The CANobserver® is a diagnose tool that's used for physical and logical long-term monitoring of CAN-Busplants. It has been planned as a stationary supplement of the CAN-Bus Tester 2. The CANobserver® is implemented into the network permanently, monitors the data transfer continuously and records itautomatically for a period of up to ten years. This is the only means of safeguarding a future-orientedmaintenance. VDI/VDE has recognized this necessity as well. The new guideline 2184, published in 2007, explains how plant operators can guarantee a reliable functioning and maintenance of their Field Bussystems

  • ​​​​​​​​​​​​​​​​Flow Rate Monitors

    Teledyne Monitor Labs

    From the #1 Leader in flow monitoring technology, TML is proud to offer the Ultraflow 150 and the Deltaflow 180 flow rate monitors. Both monitors measure actual velocity, temperature and pressure to report flow rate at standard conditions. The monitors calibrate daily to validate data accuracy.Both monitors offer a user interface which identify instrument calibrations and faults along with maintenance alerts. All of our monitors are designed to meet the rigorous demands of stack or industrial process gas monitoring.

  • Shield Room

    Comtest Engineering bv

    Our world depends on digital information & operation. An increasingly electromagnetically polluted environment, solar storms or weaponizing (H)EMP may put your operation at risk, leading to destroyed electronics, data breaches or even espionage. Owning an in-house high-performance RF-shielded enclosure is the best way to secure your critical operation and information. We understand your safety concerns. That’s why we strive for worry-free solutions with the highest level of security, precisely tailored to your needs.

  • NanoSpectralyzer

    NS2 - Applied NanoFluorescence, LLC

    NS2 is the world's only three-in-one spectrometer for carbon nanotubes. The NS2 provides all of model NS1's state-of-the-art capabilities for analyzing SWCNT samples through near-IR fluorescence and absorption. In addition, the NS2 captures Raman spectra of all CNTs, whether single-walled, multi-walled aggregated, large diameter, or chemically altered. All spectra are automatically measured with a single placement of the sample cuvette. Sophisticated software then performs integrated data analysis to characterize the CNT sample.

  • Product Safety Testing & Certification

    F-Squared Laboratories

    F2 Labs is a top, full-service product testing company.  Our safety laboratory is set up to test/evaluate products for the United States, Canada, Europe, and International Certifications. Our safety facilities are A2LA Accredited, and our safety test data and evaluations are accepted by an OSHA accredited Nationally Recognized Test Lab (NRTL). Our experienced team of engineers can develop an efficient plan for addressing your product’s safety and work with you at our facility or yours to complete the product safety testing and certification.

  • Volume4D PRO

    ScienceGL, Inc.

    Volume4D software provides advanced computer graphics for CT scan, MRI and other medical imaging. The software allows you to inspect 4D voxel data (image stack) as photorealistic multiple iso-surfaces. The software implements interactive measurement tools, specific voxel counters, area measuring, object segmentation and much more. Computed tomography (CT) and Magnetic resonance images (MRI) are supported. Texture based direct volume visualization module is implemented as additional enhancement feature.

  • Common Meter Reading Instrument - CMRI 1010

    CMRI 1010 - Signals & Systems India Private Limited

    Common Meter Reading Instrument (CMRI) is a handheld computer used to download data from electronic tri-vector meters, supporting different protocols like IEC, ANSI and PACT. CMRI is also compliant to IS-15959/ DLMS (IEC-62056) standard. CMRI can be interfaced with the portable printer for spot billing applications.SANDS CMRI-1010 comes with LCD Graphical (3.5” TFT) & 15Line x 40 Characters visibility is rugged to withstand drop on to concrete and waterproof. CMRI is available with a memory size of 512 MB.

  • PXIe-5160, 500 MHz, 2.5 GS/s, 10-Bit, w/o CableSense, 2 GB, Oscilloscope

    782621-03 - NI

    PXIe, 500 MHz, 2.5 GS/s, 10-Bit PXI Oscilloscope—The PXIe-5160 high-speed oscilloscope device has two or four channels that sample at up to 2.5 GS/s with flexible settings for coupling, voltage range, and filtering. PXI oscilloscopes also feature a number of triggering modes, deep onboard memory, and an instrument driver that includes data streaming and analysis functions. This device is ideal for applications with fast signals that require up to 500 MHz of analog bandwidth and flexible measurement configurations.

  • PXIe-5160, 500 MHz, 2.5 GS/s, 10-Bit, w/CableSense, 2 GB, Oscilloscope

    782621-13 - NI

    PXIe, 500 MHz, 2.5 GS/s, 10-Bit PXI Oscilloscope—The PXIe-5160 high-speed oscilloscope device has two or four channels that sample at up to 2.5 GS/s with flexible settings for coupling, voltage range, and filtering. PXI oscilloscopes also feature a number of triggering modes, deep onboard memory, and an instrument driver that includes data streaming and analysis functions. This device is ideal for applications with fast signals that require up to 500 MHz of analog bandwidth and flexible measurement configurations.

Get Help