-
Product
Fixed Wavelength CW Laser Source (FP) - MATRIQ
-
The Laser-1102 is a Continuous Wave (CW) laser source offering high power 850 nm output into multimode fiber with stable output power operation.
-
Product
PCI Three-Axis High Performance Laser Board with External Sampling
N1231B
-
The Keysight N1231B PCI Three-Axis Laser Board with External Sampling is a register based PCI bus board that implements three axes of laser interferometer measurement for position monitoring and closed-loop servo control. There are four external sample inputs along with four data hold inputs that allow easy synchronization with user systems. Several threshold compare registers, with both hardware outputs and interrupt capability, can be used for travel limit and in window or out of window detection functions. The dual mode hardware position outputs, controlled by the hold inputs, provide either a 32-bits/axis parallel interface or a 36-bit multiplexed interface to the 36-bit axis position data at rates up to 20MHz. The user can programmatically access the externally sampled position and velocity data, as well as software sampled position and velocity data, over the PCI bus at rates up to 100kHz (3 axes of position and velocity) or 200kHz (position or velocity only).
-
Product
Fixed Wavelength CW Laser Source (FP) - PXI
Laser 1100 Series
-
The Laser-1102 is a Continuous Wave (CW) laser source offering high power 850 nm output into multimode fiber with stable output power operation.
-
Product
Tunable Laser Source, High Power And Low SSE
N7778C
-
The N7778C value line tunable laser source offers a peak output power of more than +12 dBm, at least 75 dB/nm above its spontaneous emission level. It features a typical wavelength repeatability of ±1.5 pm at two-way sweeps up to 200 nm/s. The N7778C’s balance of features, performance and price makes it suitable for cost-effective, high-throughput manufacturing-floor component testing as well as for coherent transmission experiments.
-
Product
SparkFun Distance Sensor Breakout
4 Meter, VL53L1X (Qwiic)
-
This SparkFun Distance Sensor Breakout utilizes the VL53L1X next generation ToF (Time of Flight) sensor module to give you the highly accurate measurements at long ranges for its size. The VL53L1X from STMicroelectronics uses a VCSEL (Vertical Cavity Surface Emitting Laser) to emit an Infrared laser to time the reflection to the target. That means that you will be able to measure the distance to an object from 40mm to 4m away with millimeter resolution! To make it even easier to get your readings, all communication is enacted exclusively via I2C, utilizing our handy Qwiic system so no soldering is required to connect it to the rest of your system. However, we still have broken out 0.1”-spaced pins in case you prefer to use a breadboard.
-
Product
Digital Infrared Thermometer
IR-709
-
Shenzhen Calibeur Industries Co., Ltd..
'- Non-Contact Infrared Thermometer With Laser Targeting '- Range: -18° C to +520° C/-0.4° F to +968° F'- Accuracy : < 0°C： ±3% or ± 3°C ≥0°C： ±2% or ±2°C'- Distance spot ratio (D:S) : 12:1'- ℃/℉ exchange,'- Size: 170x85x45mm'- Weight: 120g'- Power: AAA1.5V 2pcs (not included)
-
Product
Infrared Pyrometer with Laser Sighting
thermoMETER CTlaser
-
Pyrometers of the thermoMETER CTLaser series are used for precise, industrial measurements. Using two laser beams, the measurement spot is marked which ensures a precise temperature measurement. thermoMETER CTLaser temperature sensors are used in numerous applications. From extremely low temperatures (-50°C) to the highest temperatures (3000°C), these IR pyrometers measure precisely and reliably.
-
Product
Infrared Thermometer
6574
-
Peaceful Thriving Enterprise Co Ltd
*Distance to spot ratio is 8:1.*Temperature range: -50-550℃.*Laser and Low Battery indicator.
-
Product
Laser Source Simulator
MT1888 Series
-
The MT1888 products are state-of-the-art Laser Source/Spot Simulators (LSS) used for the testing of laser guided munitions such as the Hellfire & Hellfire II missiles, Paveway, and the AGM-65E Laser Maverick missile.
-
Product
Infrared Thermometer
EST-65
-
*High quality construction w/rubber insert in grip, nose & LCD areas. *High temperature range
-
Product
Infrared Thermometer
-
Display: 3 1/2 digit liquid crystal display (LCD) with amaximum reading of 1999.Polarity: Automatic, positive implied, negative polarityindication.Low battery indication: the " " is displayed when thebattery voltage drops below the operating level.Operating environment: 0°C to 50°C at<75% relativehumidity.Storage temperature: -20°C to 60°C, 0 to 80% R.H.withbattery removed from meter.Accuracy: Stated accuracy at 23°C±5°C, <75% relativehumidity.Auto power off : 10 secondsDimensions: 148mm(H) x 105mm(W) x 42mm(D).
-
Product
Infrared Thermometers
-
Non-contact handheld type digital radiation thermometers for the measurement of temperature.
-
Product
Infrared Thermometer
-
ZhangZhou Weihua Electronic co.,ltd
Is a thermometer which infers temperature from a portion of the thermal radiation sometimes called blackbody radiation emitted by the object being measured.
-
Product
Infrared Thermometry
-
With a wide range of infrared temperature sensors, wavelengths and associated optics, AOIP offer in infrared thermometry meets most requirements of non-contact temperature measurement applications from -40°C to 2000°C.
-
Product
Infrared Gas Detector
GD10 Series
-
Teledyne Gas & Flame Detection
The GD10 Series has been designed with features that provide an effective response to the detection of gas hazards in a wide range of industrial environments from boiler plant rooms to offshore petrochemical installations.These infrared gas detectors differ from all other models, because they utilize silicon based solid-state infrared sources. The complete optomechanical design and construction is so stable that an ultra fast speed of response can be achieved while providing unparalleled service life and detector stability, thus saving on maintenance and service costs.We offer the longest combined detector and IR source warranty on the market.
-
Product
Infrared Analyzers
-
Teledyne Analytical Instruments
Infrared Analyzers by Teledyne Analytical Instruments
-
Product
Industrial Infrared
VA6530-#2742
-
Shanghai Yi Hua V&A Instrument Co., Ltd. CO.,LTD
Showcased is an industrial infrared thermometer with a handheld design. It offers easy viewing of readings with a large LCD screen. This industrial infrared thermometer outperforms the rest with high accuracy. Wide temperature measurement range. Distance-to-spot ratio: 12:1. 1.5-sec response time. With backlight. Automatically power-off function.
-
Product
Laser Optics
-
A substrate is developed into a laser optic when it is refined with a dielectric coating. Due to the wide range of possible combinations between the substrate and the coating, one optic seldom resembles another. Contact us directly and together we can design a product to adequately suit your needs.
-
Product
Laser
BDS-MM Series
-
*Pulse Width Down to 60 ps*Repetition Rate 20 MHz / 50 MHz*Free Beam or Fiber Output*Optical Power Up to 40 mW*All Electronics Integrated*No External Driver Unit*Simple +12 V Supply*40 mm x 70 mm x 120 mm
-
Product
Infrared Thermometers (Medical)
-
Useful in measuring temperature across a range of industrial and clinical environments.
-
Product
Ultrastable Lasers
-
Menlo Systems offers ultrastable, frequency stabilized lasers at basically any wavelength. We supply fully characterized systems with linewidths <1Hz and Allan deviations of 2 x 10-15 (in 1 s) as well as modules and components allowing for state-of-the-art systems tailored to customers' needs.
-
Product
Infrared Thermometer
DITH 120
-
Infrared Thermometer is also known as laser thermometerInfrared thermometer is a thermometer which infers temperature from a portion of the thermal radiation sometimes called blackbody radiation emitted by the object being measured.Laser is used to help aim the thermometer or non-contact thermometers or temperature guns, to describe the device's ability to measure temperature from a distance. By knowing the amount of infrared energy emitted by the object and its emissivity, the object's temperature can often be determined. Infrared thermometers are a subset of devices known as "thermal radiation thermometers".The design essentially consists of a lens to focus the infrared thermal radiation on to a detector, which converts the radiant power to an electrical signal that can be displayed in units of temperature after being compensated for ambient temperature. This permits temperature measurement from a distance without contact with the object to be measured. A non-contact infrared thermometer is useful for measuring temperature under circumstances where thermocouples or other probe-type sensors cannot be used or do not produce accurate data for a variety of reasons.
-
Product
Infrared Thermometers
-
Our infrared thermometers make it possible to measure a temperature without contact by way of determining an object emitting infrared radiation. Here you will find Infrared Thermometers for measuring temperature without contact and contain a targeting light to ensure the correct surface area is being measured. An infrared thermometer can only measure the temperature of exposed surfaces and not through glass. Some infrared thermometers possess a preset emissivity value, and others allow the user to choose the emissivity value depending on the surface material being measured, whether it's paper, wood or metallic surfaces.
-
Product
Pyroelectric Infrared Sensors
-
Panasonic Automotive & Industrial Systems Europe GmbH
Passive infrared motion sensors for detecting radiation changes in the infrared range.
-
Product
infrared cameras
MS-IR
-
The MS-IR infrared cameras allow to split the scene signal into eight different spectral bands rather than only one Broadband image hereby allowing spectral analysis.
-
Product
2-Axis High-Resolution Laser Axis Board for VME
10898D
-
The 10898D 2-axis high-resolution laser axis board provides the same resolution as the Keysight 10897D high-resolution laser axis board with increased slew rates and reduced noise. The increased stage velocity limits and low noise compared to previous laser systems offer premium positioning repeatability and accuracy for advanced applications such as IC fabrication equipment.
-
Product
Digital Infrared Thermometer
IR-102
-
Shenzhen Calibeur Industries Co., Ltd..
'- Range:-20℃ ～ 330℃;'- Accuracy: < 0°C ±3°C or ±3% of showed value, ≥ 0°C ±2°C or ±2% of showed value '- Distance Spot Ratio: 8:1; '- ℃ / ℉ exchange;'- Laser Targeting Function'- Backlight,LCD Display;'- Weight: 137g'- Power: 1 * 6F22 9V Alkaline battery (not included)
-
Product
Thermometers
-
At PCE you will find both a contact and non-contact thermometer for measuring and recording temperature. There is a thermometer to measure different temperature ranges between -200 and 1767ºC / -328 ... 3212ºF. Measurement of temperature is done in many different sectors. We also offer a thermometer that can indicate temperature in ºC, K (Kelvin) and ºF, as well as another that is water resistant.A wide range of thermal elements and type-K sensors are available for the thermometer. ISO calibration certificates, which include a laboratory calibration, can be ordered for most models in our thermometer range. Thermometers are instruments we use to measure the temperature of people or things.The most used and known thermometers are mercury thermometers used to measure peoples temperature and consisting of a graduated glass capillary and a pool of mercury in one end, but there are many types of thermometers such as digital thermometers that we have introduced which take temperature measurements on contact with an object these are suitable for any sector of industry. We even have infrared or laser thermometer to take measurements at distance, without contact.
-
Product
Infrared Cameras
-
The stationary infrared cameras of the VarioCAM ® HD head, VarioCAM ® hr head, VarioTHERM ® InSb and PIR uc series with their solid light metal housings are suitable for fixed use under harsh process conditions.
-
Product
Diode Lasers
-
The large spectral coverage of our diode lasers combined with the compact form factor, direct modulation capability (up to 150 MHz), true off during modulation (>70 dB aspect ratio), and integrated spectral clean-up filters make them ideal for applications in high resolution bioimaging, flow cytometry, optogenetics and quantum technologies.
