-
Product
Headspace Gas Analysis
-
The headspace gas analyzer adopts a professional structure design and is equipped with a high-precision sensor, which can accurately and conveniently determine the content and mixing ratio of O2 and CO2 in hollow packaging containers such as sealed packaging bags, bottles and cans. The equipment is used for headspace gas analysis and detection of various sealed packaging bags, packaging containers, vials, ampoules and other products.
-
Product
Data Loggers
-
An electronic device that records data over time or in relation to location either with a built in instrument or sensor or via external instruments.
-
Product
Remote Data Acquisition
-
Sometimes your sensors or the piece of equipment you are trying to control is not in a convenient place to have a PC close by. The sensors may be widely distributed through out your plant and it just wouldn’t be cost effective to run all your wiring to where the PC is. In addition, low level signals are more accurately acquired when digitized close to the signal source. In all these cases our REMOTE ACCES line of products will help. The REMOTE ACCES pods are intelligent, sensor to computer interfaces. Each pod can be used as an autonomous data logger to acquire data for later download. Or as many as 31 pods may be connected on a single two wire multidrop RS-485 network allowing a cable distance of up to 4000 ft. You can also go wireless and extend your range by adding RS-485 wireless transceivers to your serial port. Each unit comes in a rugged NEMA 4 enclosure and can withstand harsh industrial and marine environments.
-
Product
Corrosion Analysis
Resipod
-
Resipod is a fully integrated 4-point Wenner probe, designed to measure the electrical resistivity of concrete in a completely non-destructive test. It is the most accurate instrument available, extremely fast and stable and packaged in a robust, waterproof housing designed to operate in a demanding site environment. The Resipod is the successor of the classic CNS Farnell Resistivity Meter.Surface resistivity measurement provides extremely useful information about the state of a concrete structure. Not only has it been proven to be directly linked to the likelihood of corrosion and the corrosion rate, recent studies have shown that there is a direct correlation between resistivity and chloride diffusion rate and even to determination of early compressive strength. This makes it one of the most versatile NDT methods for concrete.
-
Product
Venable Stability Analysis Software
-
In 1983, Venable launched the renowned K-Factor Technique, still in use by many instrument manufacturers today. Venable has elevated the original software with its innovative Stability Analysis program. Go straight from measurement to design using Stability Analysis as its dynamic functionality eliminates lengthy manual value calculations and guesswork. Compensation amplifier synthesis capability, or coefficients for digital power supplies, enables user to achieve exact feedback loop bandwidth and phase margin desired on the first try.
-
Product
Data Acquisition Equipment
-
Get the data you want, where, how and when you want it. Fluke gives you a broad choice in data acquisition for process monitoring and laboratory test systems. You can choose a stationary or portable data logger. Transfer data to internal memory, to a removable memory card, or to your PC. Choose a standalone or distributed networked units. And you can expand your system from 20 to 1,000+ channels, depending on the series.
-
Product
Spectrum Analysis For P50xxB Up To 32 GHz
S970906B
-
Add spectrum analysis to your P50xxB Streamline series vector network analyzer
-
Product
Compliance and Data Protection
-
Locate and protect sensitive and PII data to identify risk and ensure compliance. Monitor system events to identify and proactively respond to potential risks and bad actors. Simplify security operations, reduce risk and lighten security management load with automated ID and authorization cleanup.
-
Product
Data Acquisition & Control
SmartDAC+
-
With modular I/O you can scale your data acquisition system the way you want it with the ability to upgrade as your needs evolve. Access live data by using your browser, iPhone or iPad. Universal viewer allows users to access, print and analyze historical data.
-
-
Product
Data Analysis Software
-
software package which is used to obtain, display and analyse data from control systems such as those used within motorsport and automotive applications.Familiar controls and extensive use of the mouse, menus and accelerator keys make it easy to set up and to use
-
Product
Data Management
-
The world of manufacturing gives utmost importance to the availability of qualified data. Marposs' solutions generate data that accurately represents the product features and the status of the processes running underneath. Through our technologies of measurement collection, archiving and of applied statistical process control a wealth of reliable information is pooled. Our networking and clouding solutions make that information retrievable and consumable.
-
Product
Rain Indicator Data Logger
HD2013-DB
-
Rain indicator Data Logger with LCD display; reads and stores up to 32,255 pulses coming from a rain gauge with tipping bucket.
-
Product
USB Data Acquisition (DAQ) Products
-
ACCES now offers USB-based data acquisition and control in both standard packaging and embedded OEM USB/104 board only options. These USB DAQ devices are perfect for a variety of applications requiring monitoring, control and industrial serial communications. USB is by far the most popular and compatible standard data interface for direct PC connection. Add the features you need in your application in hours, not days. Choose from over 100 different models and options (including extended temperature) encompassing analog I/O, digital I/O, counter/timer, and serial I/O configurations. Experience simple and immediate connection to any PC or embedded system with a USB port.
-
Product
Failure Analysis
MicroINSPECT 300FA
-
The MicroINSPECT 300FA is an automated wafer inspection tool used for semiconductor wafer failure analysis. Its small footprint, high speed, and low cost relative to its rich features yield a superb cost of ownership and makes this an ideal tool for your fab or failure analysis lab. The MicroINSPECT 300FA combines advanced robotics, wafer sorting, an intelligent wafer inspection microscope together with SiteVIEW Software to produce an integrated failure analysis tool.
-
Product
Mass Spectrometry Imaging Data Analysis Software
IMAGEREVEAL MS
-
Simplifying Routine Analysis Are you worried about wasting time or valuable data? Automatically uncover important information from large amounts of data with IMAGEREVEAL MS.
-
Product
Engineering Data Management SOoftware
EDM Modal
-
Engineering Data Management (EDM) is a PC-based software program designed for real-time data management and processing. This easy-to-use, Windows-native software manages the communication between the PC and all Crystal Instruments hardware platforms.
-
Product
pHmeter-Conductivity-Thermometer Data Logger
HD2156.2
-
pHmeter-Conductivity-Thermometer measures pH, mV, conductivity, liquid resistivity, total dissolved solids, salinity and temperature. Datalogger, stores the maximum, minimum, average value and can store up to 20,000 sets of three measurements.
-
Product
Azure Data Lake Storage
-
Eliminate data silos with a single storage platform. Optimize costs with tiered storage and policy management. Authenticate data using Azure Active Directory (Azure AD) and role-based access control (RBAC). And help protect data with security features like encryption at rest and advanced threat protection.
-
Product
Network-Ready Data Acquisition System
DAPserver 500
-
The DAPserver 500 and DAPserver 502 – and the DAPserver 500R and 502R, the latter "R" models for rugged environments – serve as fully integrated test, measurement, and control products. Built with experience gained over many years of integrating third-party hardware, these high-performance combined systems are now available as standard products,
-
Product
Temperature Data Logger
-
The temperature recording in a process is the most common and widely required application in any process. The commonly used temperature sensors are RTD Pt100 / Pt1000/ Cu53 / Thermistors and different kinds of Thermocouple. In order to avoid electromagnetic interference, the temperature signal is converted to 4-20mA and is carried to the logger. Our range of Temperature Data Logger includes Temperature Humidity Logger, RTD Data Logger, Thermocouple Data Logger and Flameproof Data Loggers.
-
Product
Tmeprature and Humidity Data Logger
VA600-N
-
Shanghai Yi Hua V&A Instrument Co., Ltd. CO.,LTD
Multi-function record meter is a new record meter designed for the actual demand of various industrial ,it can logger 16000.00.
-
Product
Data Loggers
-
PTC® Instruments is a west coast distributor for MadgeTech® data loggers. Record carbon dioxide, humidity, temperature and pressure. The temperatures for perishable goods in transit, HACCP Compliance, HVAC, medical, pharmaceutical, sterilization, environmental research, perishable goods, food storage monitoring, warehouse monitoring, environmental studies, wine cellars, humidors, refrigeration, archival storage for fine art and books.
-
Product
PCI Data Acquisition Boards
AD12-100DMA Series - Dual 12-bit A/D, 25 MS/s
-
Model AD12-100DMA is similar to the ADDA12-100DMA, but does not have D/A converters.
-
Product
Ultra-Small, High-Shock Ethernet Data Acquisition System
SLICE6
-
Diversified Technical Systems, Inc.
SLICE6 is a modular data acquisition system featuring unmatched performance, flexibility and reliability in an ultra-small package. SLICE6 makes it easy to build systems in 6-channel increments and supports up to hundreds of channels per test.
-
Product
Multi-omics Analysis Package
-
The Multi-omics Analysis Package, developed for metabolic engineering applications, provides the ability to automatically generate metabolic maps and perform a variety of data analysis for the vast data generated in fields like metabolomics, proteomics and flux analysis. It offers a powerful platform to support drug discovery, bioengineering and other life science research applications.
-
Product
Mission Data Transmitters
-
L3 Cincinnati Electronics (L3 CE) offers a wide choice of modulators and transmitters for spacecraft ranging from X-Band to Ku-Band. All the products listed below can be customized to specific user requirements.
-
Product
Inorganic Elemental Analysis
-
Elementar Analysensysteme GmbH
The elemental composition of a material determines its properties. Elemental analysis is therefore essential for the characterization and quality control of materials that need to meet certain requirements.Elementar's user-friendly inductar® series for inorganic elmental analysis uses the high-temperature combustion method to determine elemental concentrations of carbon, sulfur, oxygen, nitrogen, and hydrogen and is the ideal solution for R&D, routine, and high-throughput laboratories.
-
Product
Aircraft Data Recording
COTS
-
Our powerful and flexible Ballard Avionics I/O Computers provide the platform for Silo Data recording. These rugged, conduction-cooled, COTS devices combine a powerful computer processor, multi-protocol databus interfaces (MIL-STD-1553, ARINC 429, ARINC 717, ARINC 708), Ethernet, USB, serial, discrete I/O, and other I/O in a small, lightweight package. They deliver outstanding performance on the ground and in the air and are routinely deployed on helicopter, fixed wing, ground mobile, and marine platforms.
-
Product
Data Science & Deep Learning Workstations
-
A powerful data science or deep learning application is just half of the equation. Having the right high-performance system to process all that data, custom built for your workflow and location, is what makes it a complete data science solution. NextComputing offers best-in-class systems to suit your needs.
