Product

Light Sources

-

Inframet

Inframet

There are many low cost artificial light sources used for illumination or for industrial applications: tungsten or halogen bulbs, fluorescent lamps, LED lamps etc. Some of these sources have regulated intensity of emitted light. However, there very few calibrated light sources of precisely known parameters. A light source can be considered as calibrated when its user can precisely regulate its photometric/radiometric parameters like luminance (or illuminance), radiance (or irradiance) at defined spectrum of interest. Such light sources are needed in many applications among them, in systems for testing night vision devices, VIS-NIR cameras and SWIR imagers. Inframet offers a series of calibrated light sources that can be divides into three groups:

Product

Light Meters For Horticulture (PAR, UV And NIR)

-

Gigahertz-Optik GmbH

Gigahertz-Optik GmbH

Light meters for measuring horticultural lighting in terms of PAR, UV and NIR irradiance.

Product

Evaporative Light Scattering Detector

ELSD-LTII

-

Shimadzu Corp.

ELSD-LTII - Shimadzu Corp.

The ELSD-LTII utilizes a high-efficiency LED and enhanced digital signal treatment to minimize noise and deliver optimum sensitivity for trace analysis. An innovative cell design also reduces band broadening and allows sensitivity levels below 200 picograms. The high-performance optical detection system can also be used for combinatorial chemistry and high-throughput screening applications. The new Low Temperature Evaporative Light Scattering Detector (ELSD-LTII) is an easy-to-operate, universal detector that identifies analytes with uniform sensitivity regardless of their spectroscopic properties. It is not a spectroscopic detector. Instead, it removes the mobile phase through evaporation and then makes a light scattering measurement of the dried analyte particles.

Product

Light Sensor

NaPiCa

-

Panasonic Industrial Devices Sales Company of America

NaPiCa - Panasonic Industrial Devices Sales Company of America

Visible light sensor (Silicon Photo IC) that detects light and converts into electrical current. Consists of a photodiode and built-in amplifier. Optical filter provides spectral response similar to human eye sensitivity. Applications include: LCD Backlight Control, Commercial and Residential Lighting Brightness Control, Security Lighting.

Product

Inductive Pick-up Timing Light

150

-

Electronic Specialties Inc.

150 - Electronic Specialties Inc.

This hard working timing light is accurate up to 8,000 RPM. An extremely bright flash will help you time the engine. The break and shock resistant plastic housing, reduces damage from accidental drops.

Product

Light Microscopes

-

Leica Microsystems

Leica Microsystems

Compound light microscopes from Leica Microsystems meet the highest demands whatever the application – from routine laboratory work to the research of multi-dimensional dynamic processes in living cells.

Product

Light Measurement Sensors

-

Gamma Scientific Inc.

Gamma Scientific Inc.

Gamma Scientific offers a catalog of professional light intensity measurement devices for photometric and radiometric applications. These devices are typically utilized by laboratories, OEM’s, value-added resellers and other groups seeking to accurately measure light intensity and brightness. Browse our light intensity measurement device catalogs to find the right photometry or radiometry solution today.

Product

Tabletop Light Fastness Tester

TF421

-

TESTEX Testing Equipment Systems Ltd.

TF421 - TESTEX Testing Equipment Systems Ltd.

Tabletop Light Fastness Tester is a powerful xenon instrument with affordable price for conducting accelerated tests of light fastness and photo stability test.

Product

Dual Wavelength Single Mode Light Source

FiberLink 6654

-

Artel Video Systems

FiberLink 6654 - Artel Video Systems

The Fiberlink 6654 Dual Wavelength Single Mode Light Source is a cost effective, compact, handheld light source. The temperature compensated outputs are calibrated to couple -10dBm of optical power into single mode fiber.

Product

Light Measurement Technology

-

Gossen Metrawatt

Gossen Metrawatt

High-precision photometric instruments and systems used to measure quantities like illuminance, luminance, and irradiance.

Product

Intense Pulsed Light (IPL) Energy Sensors

-

MKS Ophir

MKS Ophir

These energy sensors measure intense pulsed light IPL radiation used in cosmetic treatments. The light from these sources is broadband and usually has a high divergence. Furthermore, the light source is often coupled to the skin via an index matching gel. These special solutions accurately measure the energy of IPL pulses.

Product

Light Distribution Photometer Goniophotometer

LCG-1600

-

Shenzhen Chuangxin Instruments Co., Ltd.

LCG-1600 - Shenzhen Chuangxin Instruments Co., Ltd.

LCG-1600 Goniophotometeric System carries out measuring methods of fixed location and rotating luminaires. The measured luminaire is installed on the two-dimension rotating table, using “+” laser to make the luminaire lighting center superposed with the rotating center of rotating table. The mechanical equipment allows turning the tested luminaires around a vertical axis and a horizontal axis. When tested luminaires turn around horizontal axis, the detector which is at the same level with rotating table will measure the intensity of each direction at this surface. When rotating with vertical axis, the detector will measure the intensity at the vertical surface. The vertical and horizontal axis can be rotated continuously at ±180° or 0~360°. According to the measurement requirements, the system can be operated in C-γ coordinates. When getting intensity distribution data, computer will calculate other photometric parameters automatically.

Product

Multi Channel LED Light Source

LE7

-

Image Engineering GmbH & Co. KG

LE7 - Image Engineering GmbH & Co. KG

The iQ-LED is the latest development of Image Engineering. It is a multi channel LED light source that provides the possibility to generate the spectral characteristics of nearly every required light source in just one device. With its 22 different software controlled LED channels it is possible to generate a spectral match of standard light sources such as, D50, D55, D65, A, B, C etc. with very high accuracy.

Product

Standard Light Source

SLS-50W

-

Lisun Electronics Inc.

SLS-50W - Lisun Electronics Inc.

OSRAM Standard Lamp to calibrate the spectrum and luminous flux with Lisun Lab certification. The data can be traced NIM. The Standard Lamp Source is used to calibrate the integrating sphere system. The different size of Integrating Sphere should choose the right power of standard lamp source.

Product

Safety Light Grids

-

ifm efector, inc.

ifm efector, inc.

*Type 4 (IEC 61496) safety light curtains at Type 2 pricing*Reliable protection of hazardous areas*Industry standard M12 connection for simple wiring*Versions for the use in high pressure cleaning applications*Versions with active /passive system

Product

Portable Spectrophotometers For Light Transmission

-

Gigahertz-Optik GmbH

Gigahertz-Optik GmbH

Portable and benchtop spectrophotometers for measuring light transmission in the full visible range in-situ. Due to the innovative approach of mutual correction, these measurements are also possible in ambient light.

Product

Calibration Light Source

CAL2

-

Image Engineering GmbH & Co. KG

CAL2 - Image Engineering GmbH & Co. KG

The CAL2, based on our 22 channel spectrally tunable iQ-LED source, can be adapted for use in many different areas.

Product

Light

-

Thorlabs, Inc.

Thorlabs, Inc.

Welcome to Thorlabs; below you will find links to light emitters, sources, and controllers, a subset of our entire line of photonics products. Our light sources are conveniently separated into coherent and incoherent sources. The coherent source category includes laser diodes, laser diode modules, tunable lasers, HeNe lasers, and femtosecond lasers, while the incoherent source link brings you to a selection of LEDs, white light, and broadband SLD sources. The Quantum Electronics category includes optical amplifiers, modulators, and gain elements that are frequently used in research and OEM applications. All of our light sources and optical amplifiers are supported by an extensive line of mounts, sockets, TEC controllers, and current controllers.

Product

Optical Light Source

TM3111

-

T&M Tools Limited Co

TM3111 - T&M Tools Limited Co

TM3111 optical light source is a handheld optical light source, It can provide 1 to 6  wavelengths output to satisfy specific requirements including the 650nm visible light source and the 1310/1550nm wavelengths for single mode fiber or the 850/1300nm wavelengths for multimode fiber, as well as other wavelengths according to customer’s needs.

Product

Light Meter

-

Lumu Labs

Lumu Labs

Lumu Light Meter incorporate two state of the art sensors. True color sensor, based on the color standard CIE 1931/DIN 5033, and fast silicon photodiode capturing light at astonishing 750 000 measurements/second. Each Lumu Light Meter is calibrated before leaving the manufacturing line and comes with calibration certificate.

Product

Premium Spectral Light Meter

GL SPECTIS 1.0 TOUCH

-

GL Optic

GL SPECTIS 1.0 TOUCH - GL Optic

The Spectis 1.0 Touch handheld light meter offers unmatched performance and flexibility. With an interchangeable detector, the system can be used for wide range of applications and measurement geometries. Use in the field, the lab or both!

Product

Light-Guided Connector Assembly | Cable & Harness Tester

CableEye Light Director System

-

CAMI Research Inc.

CableEye Light Director System - CAMI Research Inc.

Our Light Director™ system (patented) provides a computer-guided technique for assembling connectors used in aerospace, medical, and other high-reliability applications. This system uses light fibers driven by super-bright LED lamps to individually illuminate target cavities in the connector being assembled. When the technician enters the wire code printed on unconnected wires, or touches a wire connected at the other end, the CableEye software turns on the appropriate fiber, thereby causing a bright, flashing light to project from inside the target cavity guiding the technician to the proper insertion point. Correct insertion is confirmed by the elimination of light from that location, whereas insertion into an incorrect location leaves the flashing light visible.

Product

LED Light Bar Module For USC-360 Series

USC-P03-B302

-

Advantech Co. Ltd.

USC-P03-B302 - Advantech Co. Ltd.

Interface: USB, OS support: Windows 10 and Android, Operating temperature: 0 ~ 40 °C.