Showing results: 4426 - 4440 of 8449 items found.
-
Teledyne LeCroy
Teledyne LeCroy's Frontline family of wireless protocol analyzers, sniffers, and testers deliver unparalleled performance for complex multi-technology test environments including market-leading support for the latest Bluetooth, Wi-Fi (802.11), and Matter/Thread/Zigbee (802.15.4) technologies. We've got you covered - from RF PHY testing to protocol analysis to Bluetooth LE conformance testing.
-
GS-X -
S.P.L. Elektronik
The GS-X Testing System consists of a Basic Unit and various plug-in test modules which the user can purchase as required. The range of functions of these Module-Box is being continuously expanded, and presently includes functions for testing the following devices: - Infusion pumps, Cardiac pacemakers, Defibrillators, High-frequency Surgical equipment, electrical safety ECG Simulation, Equipment for electro-stimulation.
-
LPA-1 -
Protec Instrument Corp
The LPA-1 is a state-of-the-art Lead Paint Analyzer using X-Ray Florescence (XRF) and K-Shell technologies, providing readings in as little as 2-4 seconds. It is widely considered the fastest, most reliable lead inspection system today. Non-destructive testing for lead on painted surfaces. Fast, efficient and easy to use testing device. Completes readings in 2-4 seconds.
-
GDLP -
HV Hipot Electric Co.,Ltd.
GDLP series Transmission Line Test System is a new generation power transmission line frequency parameter testing system.It integrated with frequency conversion testing power,precise measuring module and DSP high speed digital processing chip,which eliminate strong interference and ensure the safety of equipment, with convenient, fast and accurate measure .
-
T3111S -
Keysight Technologies
The T3111S RIDER NFC Conformance Test System is the Keysight solution for RF Analog and Digital Protocol testing of NFC, EMV and ISO devices. The Test System is based on the Keysight T1141A NFC Test Set and it is complemented by the Keysight's or FIME's robots for accurate and repeatability RF testing. Selected 3rd party positioning robots can also be supported.
-
Granite River Labs Inc.
PCI Express® 4.0 Receiver Test Automation Software Suite (GRL-PCIE4-RXA) provides an automated, simple and efficient way to test your 4.0 designs using the Anritsu MP1900A with any Tektronix and Keysight Real-Time Oscilloscope oscilloscope. The GRL-PCIE4-RXA Test Suite features two components that can be ordered separately or bundled together. GRL-PCIE4-BASE-RXA is used for testing your PCIe® 4.0 Receiver to the Base (ASIC) Specification, while GRL-PCIE4-CEM-RXA is used for testing end products to the PCIe® 4.0 CEM (Card Electro-Mechanical) Specification. GRL-PCIE4-RXA provides a simple user interface to automate complex PCIe testing. The software runs on Windows 7 or higher oscilloscope or any PC OS, and significantly reduces equipment calibration and test time. For Base Specification testing, GRL software uses the industry-standard Seasim statistical data eye simulator to establish the calibrated test channel DDJ. The final calibrated eye diagram uses both Seasim and SigTest software to arrive at the final stressed eye diagram. Receiver jitter tolerance and margin testing can then be performed on the device under test. For CEM Spec testing, GRL software uses VNA method for Channel measurement and SigTest for all other stressed eye impairments. Jitter Tolerance and Margin Testing is offered in both BASE and CEM software versions of the software, while The CEM version provides all the tests required by the PCIe® 4.0 CEM CTS. Transmitter testing is also available using GRL-PCIE34-TXP1 Software and Controller. If ordered with with GRL-PCIE4-RXA Receiver test software, all PCIe® 4.0 CTS CEM tests (Transmitter and Receiver) can be performed on the MP1900 and any vendor’s Real-Time Oscilloscope using GRL’s automation framework without the need for vendor specific software tools.
-
Kokusai Co., Ltd.
It is a testing device that can perform compression evaluation test of packaged cargo equipped with an electric servo motor type actuator.
-
Zygo Corporation
Optical imaging applications are broad and varied. Testing at a system's design wavelength is critical for development, final alignment and qualification.
-
CX-P002 -
Shenzhen Chuangxin Instruments Co., Ltd.
Temperature & Humidity Test Chamber It's used for testing the performance of heat-resisting, cold-resistant, dry-resistant and moisture-proof of different materials
-
ROTOFLUX® Multichannel MFL -
Magnetic Analysis Corp
MAC’s Rotoflux® Multiplex Electronics—Magnetic Flux Leakage testing that provides superior technology, performance and versatility.
-
Micran Co. Ltd.
Instruments like RF power meters, vector network analyzers, and spectrum analyzers are used for RF and microwave testing.
-
SONODUR Product Family -
Foerster Instruments, Incorporated
The non-destructive UCI test method (Ultrasonic Contact Impedance) as well as the Leeb test method enable fast and mobile measurement as a supplement to the classical hardness test. Due to the compact measuring probes and sensors of the SONO series, the devices can also be used in difficult test positions and with complex component geometries. Fields of application are e.g. incoming goods inspection, mix-up testing, production control, quality assurance, weld seam testing, cut edge testing, maintenance on installed components as well as the replacement of dynamic hardness testers for small material thicknesses (below 50 mm, e.g. boilers, tubes).
-
Model 7642 -
Jinan Testing Equipment IE Corporation
These extensometers use a high-temperature capacitive sensor and do not require any cooling. They will operate up to the maximum temperature limit of most environmental chambers used in materials testing. The Model 7642 is ideal for testing composites, metals and high temperature polymers in tensile, compression or cyclic testing. All units can be displaced in both compression and tension. The extensometer is supplied with the advanced DT6229 controller. The standard output is 0-10VDC analog signal, factory calibrated with the extensometer. This system provides a number of functional enhancements, including high speed digital output, built in calibration and tare functions, analog and digital filters, and more.
-
ACMAS Technologies Pvt. Ltd.
Constant Temperature and Humidity Test Chamber from Weiber are environmental test chambers, designed to simulate constant climatic conditions for testing a wide variety of products for their quality, performance, shelf life and stability. They are used to simulate constant temperature and humidity conditions, thereby creating a physiologically ideal environment for product testing. These equipments are most commonly employed for testing electrical devices, electronic parts and components, instruments, biological samples, food items and other manufactured and processed goods and find widespread usage in scientific research organizations, semiconductor industries, material research institutes and other industrial and manufacturing units.
-
Pulse Sequencer -
Rohde & Schwarz GmbH & Co. KG
R&S®Pulse Sequencer software together with a vector signal generator from Rohde & Schwarz or just as software provides a compelling radar signal generation solution to engineers and technicians responsible for testing radar receivers. The solution is in line with the trend of testing more in the lab rather than expensive field testing. Co-engineered with the industry, the solution supports all relevant modern radar scenario test cases and can account for real-world environments. It uses commercially available R&S®Pulse Sequencer PC software and off-the-shelf Rohde & Schwarz vector signal generators.