Product

Grinding Tool Dynamometer

UIG-17

-

Unitech Scales And Measurements Pvt. Ltd

UIG-17 - Unitech Scales And Measurements Pvt. Ltd

Unitech offers tool dynamometers to measure cutting forces on various machines like lathe, drill, milling machines. All three direction forces are measured simultaneously and displayed. Tool dynamometers are useful to study, analyse the optimum feed, speed and depth of cut on different materials. The dynamometers are also available in various capacities as per customer requirement.

Product

Sensors for T-slot Cylinders

-

SICK Sensor Intelligence

SICK Sensor Intelligence

Reliable, high-performance, rugged - magnetic cylinder sensors from SICK for the T-slotMagnetic cylinder sensors from SICK ofter the perfect option for all conventional pneumatic actuators with T-slots. They are precisely tailored for the different nut tolerances. Thanks to the huge range of magnetic cylinder sensors to choose from, we can meet your every need. Drop-in mounting, short, compact design with enormous retaining force, combination bolt, safe switching point detection, sensors with two switching points, and universal mounting options using an adapter make it clear: Magnetic cylinder sensors from SICK are prepared for all installation sites and situations.

Product

Steel Structure Analyzer

NOVOTEST KRC-M2 (Coercive Force Meter)

-

NovoTest

NOVOTEST KRC-M2 (Coercive Force Meter) - NovoTest

Steel Structure Analyzer NOVOTEST KRC-M2 is designed for measuring coercive force of metal products in accordance with IEC 60404-7 and is used for non-destructive testing of chemical-thermal, thermal and thermomechanical treatments, evaluation of mechanical properties and residual stresses.

Product

Nanolattice Standards for Analytical Instruments

-

VLSI Standards, Inc.

VLSI Standards, Inc.

The NanoLattice™ (NLSM) 100 nm pitch standard utilizes gratings with near perfect periodicity to calibrate magnification and scan linearity of Electron and Atomic Force Microscopes (AFM). Make the grade, with the highest quality pitch standard of its kind available.

Product

Static Jack System

-

Shimadzu Corp.

Shimadzu Corp.

The servo actuator system applies static test force loads on structures at high precision to obtain their mechanical characteristics on an experimental basis.

Product

Mechanical Wedge Action Grips

2716 Series

-

Instron

2716 Series - Instron

The Instron mechanical wedge action grips are durable tensile grips designed to automatically increase clamping force as test loads rise, maintaining fixed jaw positions and preventing slippage. Their open-front, moving-body design allows easy specimen insertion while ensuring consistent gauge length and minimal compressive force during clamping, making them a versatile gripping solution and particularly suitable for testing high-strength materials such as metals and composites.

Product

Signal Conditioner As Circuit Board Module

-

INELTA Sensorsysteme GmbH & Co. KG

INELTA Sensorsysteme GmbH & Co. KG

For LVDT Displacement Sensors, DMS Force Sensors

Product

Linear Actuators

-

ABB Ltd.

ABB Ltd.

Electrical linear actuators of the LME... / RSD ... series are the optimal solution for the operation of final control elements with preferably linear movement. The internal rotary / linear conversion is done virtually wear-free and the actuator thrust rod transfers the force directly to the final control element.

Product

Scott Type Crease-Flex Abrasion Tester

TF119

-

TESTEX Testing Equipment Systems Ltd.

TF119 - TESTEX Testing Equipment Systems Ltd.

Scott Type Crease-Flex Abrasion Tester, to determine the crease-Flex abrasion resistance of leather, rubber cloth etc. The force loaded on specimen, distance between grips and the two-way distance can be adjustable. And the force loaded on specimen is of spring type.

Product

Precise Ball-fall Tester

-

King Design Industrial Co., Ltd.

King Design Industrial Co., Ltd.

Auto-lift device; accuracy is to 1mm. Precise-casting formed; won’t influence floor structure. Good test-repeatability; easy to operate. Can measure the hit time & maximum shock force. Conform to CNS & JIS specifications. Can output report, save file and make record. Can extend the optingal functions and measure joule. Anvil seat size can be changed to any size. Chinese measuring interface; easy to comprehend and operate. Timely observe the energy and shock force. Pull-down window; fast in setting.

Product

Exciter Head

-

Xcite Systems Corporation

Xcite Systems Corporation

The Exciter Head, with its force and displacement transducers, generates and measures the force or torque to the structure being tested and provides feedback signals for control of the test variables.

Product

Countermeasures Dispenser Testers (CDT)

-

BAE Systems Inc.

BAE Systems Inc.

The nation’s Air Force, Army, Navy, Marine Corps, and key government agencies all depend on countermeasure dispensing systems – including the AN/ALE-47 and others – aboard their aircraft for self-protection against missile attacks and other airborne munitions. Especially when operating in contested areas, a properly-functioning countermeasure dispensing system can make all the difference to the success of a mission. That’s ample reason for aviation maintenance and flight prep crews to prefer the unmatched reliability of BAE Systems Rokar Countermeasure Dispenser Testers (CDT) for keeping their countermeasure dispensing systems performing effectively and safely.

Product

Acceleration Simulation Mode (ASM) Roller Set

ASM-P-PLUS | VP 230047

-

Maschinenbau Haldenwang GmbH & Co. KG.

ASM-P-PLUS | VP 230047 - Maschinenbau Haldenwang GmbH & Co. KG.

The ASM-P-PLUS roller set is used in test centres and is suitable for vehicles with a single driven axle. It was designed for the exact measurement of the exhaust gas behaviour of vehicles during their transient emission test and permits a driving resistance simulation for the exhaust gas tests ASM-5015 and ASM-2525 (Acceleration Simulation Mode) in accordance with the specifications BAR '97. The increased tractive force of its eddy current brake means that the ASM-P-PLUS is also suitable for power measurements at constant speed and constant tractive force.

Product

Bite Test Clamp

G201A29-30

-

SDL Atlas

G201A29-30 - SDL Atlas

Simulates a child biting the accessible area of child-related products. The part of the child-related products being tested is placed in a bite test clamp & a specified force is applied for a specified period. The child-related products is then tested to ascertain whether or not any hazards result from the bite test such as sharp points/sharp edges/small parts.

Product

Vertical Probe Cards

B3

-

Nidec SV Probe Pte. Ltd.

B3 - Nidec SV Probe Pte. Ltd.

The patent-pending B3™ structure requires a minimum number of parts and can handle up to 300 probes. This vertical technology can provide: • Increased Uptime • Extended Probe Lifetime • Reduced Maintenance • Lower Cost of TestThe B3™ is an ideal solution for testing small pads and the low force probes minimize scrub. Planarity also remains stable over time increasing probe card life. Contact your sales representative to learn more about our B3™ probe cards.

Product

TLP Probe Arm Kit

TPA-95

-

High Power Pulse Instruments GmbH

TPA-95 - High Power Pulse Instruments GmbH

*Flexible pulse force, pulse sense combined TLP probe arm kit based on TPA-95L and TPA-95R*Compatible with typical standard micropositioner mechanical interfaces*4.7 kΩ pulse sense voltage divider, which results in a voltage transfer ratio of (4700 + 50)/50 = 95 : 1 into 50 Ω*Variable probe pitch configuration*1 m flexible 50 Ω cables with SMA connector for pulse sense*0.1 m flexible 50 Ω cables with SMA connector for pulse force*Tungsten probe tips*Can be used for chuck backside grounded TLP measurements

Product

Lo-PRO®file ZIF (Zero-Insertion-Force) Socket

Series 526

-

Aries

Series 526 - Aries

LO-PRO file Zero Insertion Force Socket. A choice of 24, 28, or 40 pin count devices can be inserted without bending or otherwise damaging the legs, since no force is required to either insert or remove the component from the socket. A metal cam provides strong, smooth action as it moves to a positive stop, compressing the double-sided contacts, ensuring a gas-tight seal.

Product

Industrial Shock Absorbers

-

ACE Controls Inc.

ACE Controls Inc.

ACE industrial shock absorbers work hard. Their application means moving loads are evenly decelerated over the full stroke. The result: the lowest braking force and shortest braking time. The MAGNUM series from ACE is viewed as the reference standard for medium-sized damping technology.

Product

Automotive Tester

-

PCE Instruments

PCE Instruments

An automotive tester can be used to inspect one or more aspects of an automobile. For example, a borescope automotive tester is an automotive inspection camera used by auto body mechanics to see inside car, truck and other vehicle engines before removing any engine parts. Other kinds of automotive tester devices are used to adjust belt tension, test the electronic ignition starter, search for air conditioning leaks, measure the force required to press a brake pedal, determine the antifreeze concentration, or check the paint thickness over collision repairs.PCE Instruments (PCE) offers a wide variety of automotive tester products. These diagnostic support tools help professional automobile mechanics identify a number of vehicle repair needs. PCE's automotive tester products can aid in the diagnosis of many different mechanical and electrical system issues, including but not limited to locating the cause of an engine misfire, testing fuel injector resistance, pinpointing an engine coolant leak, or detecting car cylinder head problems. It's no wonder so many auto repair technicians choose to stock theirs shops and garages with PCE automotive tester products.

Product

ForceTest Force Measuring Software

-

AMETEK Sensors, Test & Calibration

AMETEK Sensors, Test & Calibration

The ForceTest software interfaces directly with your digital force gauge enabling you to automatically capture tests and graphs on a personal computer. Test results and graph can be monitored directly on the live screen in real time while the test is being performed.

Product

IGBT Power Supplies - Air Cooled

-

Carl E. Holmes Company

Carl E. Holmes Company

CEHCO The MSA1000 Rectifiers are based on IGBT Technology. This reliable technology assures excellent quality DC currents with a ripple of < 3% and a control accuracy of less than 1%. The MS-Series features constant voltage and current control with easy, quick installation and maintenance. Modular versions easily increase the output by means of series or parallel connection. All models have DC short circuit protection. With forced air-cooled models, the cooling air quantity is controlled in relation to the load reducing contamination and noise levels.

Product

OEM Weigh Cells

-

Sartorius AG

Sartorius AG

Our weigh cells feature electromagnetic force compensation, strain-gauge type load cells, and electronic modules for various scenarios.

Product

S-Type Load Cells

-

PCB Piezotronics, Inc.

PCB Piezotronics, Inc.

S-Type load cells are low-cost and high performance side mounted load cells suitable for a number of weighing and general force measurement applications. They come with a 6-foot strain relieved integral cable with pigtail leads that are stripped and tinned for electrical interface.