Product

Portable Connector End Face Geometry Interferometer

-

Thorlabs, Inc.

Thorlabs, Inc.

Thorlabs’ Vytran® Connect-Chek® Interferometer automatically and precisely measures radius of curvature, apex offset of polish, and fiber undercut or protrusion on any PC or APC, single-fiber connector. The CC6000 interferometer uses a non-contact tilted-phase-analysis technique for fast, reliable measurements of connector end faces. This compact interferometer has a carrying handle and must be attached to a desktop or laptop computer (not included) with a standard USB 2.0 port for operation. The included CC6000 software, which is used to control the interferometer, can be installed on a computer with the minimum requirements in the table below. Designed for use in both the factory and the field, this interferometer provides crucial quality information needed to assure long-term performance of fiber optic connectors. One CC250P Mount for Ø2.50 mm PC Connectors and one RT250P Reference Tool for calibrating the CC250P mount are included with the CC6000 interferometer; mounts and reference tools that enable measurement of other PC or APC, single-fiber connectors are available separately below. When used with an appropriate mount for APC connectors, the CC6000 interferometer is also capable of measuring the APC angle and key error.

Product

Dual Port Fibre Channel End-System Module for PXI Express

PXIe-FC4-NIC

-

Avionics Interface Technologies

PXIe-FC4-NIC - Avionics Interface Technologies

Dual port module, operates as a Fibre Channel network node with support for multiple upper layer protocols.

Product

Fiber Containment Vaults

-

AFL

AFL

Switchblade is an innovative fiber containment vault with a folding design that reduces shipping cost, storage space footprint and increases productivity and speed to market. The flared design maintains a best-in-class strength to weight ratio – minimizing the effects of frost heave, while optimizing internal volume.

Product

Termini

-

Amphenol Fiber Systems International

Amphenol Fiber Systems International

Fiber optic termini provide superior optical and mechanical performance.

Product

Pyrometers

FIBER Series

-

Nagman Instruments & Electronics Pvt. Ltd

FIBER Series - Nagman Instruments & Electronics Pvt. Ltd

FIBER Series are specially designed for critical applications in harsh industrial sites, hard to reach areas and precise temperature control requirements. Fiber optics can withstand high temperature up to 250°C, without need of additional water cooling accessories. It has strong casing, lens (with air purge functions), die cast aluminium housing with IP54 environment protection grade.

Product

Optical Power Meter

-

Wuhan Sunma Technology Co., Ltd.

Wuhan Sunma Technology Co., Ltd.

Optical Power Meter (OPM) is an essential fiber test instrument used for absolute optical signal measurement as well as fiber optic loss related measurement. The term usually refers to a device for testing average power in fiber optic systems. Fiber optical power meter is a tool for telecom and CATV network. This handheld optical power meter features ingenious appearance, wide range of power measurement, high accurate test precision and user automatic self-calibration function.

Product

Fiber Optic Cable

-

AFL

AFL

Is an assembly similar to an electrical cable but containing one or more optical fibers that are used to carry light.

Product

Optical OTDR

TLM-01D

-

Hangzhou Tuolima Network Technologies Co., Ltd.

TLM-01D - Hangzhou Tuolima Network Technologies Co., Ltd.

OTDR-01D series handheld optical time domain reflectometer (OTDR) is a new generation of intelligent optical measuring instrument designed for the optical fiber communication system testing by TUOLIMA Network Technologies Co., Ltd.. This product is mainly used to measure the parameters of optical fibers and cables, such as length, loss, and connection quality, etc.; it can realize the accurate positioning of event points and fault points, and can be widely used in the construction, maintenance testing and emergency repair of the optical fiber communication systems as well as the research, production and production measurement of optical fibers and cables and so on. This product can provide you with the highest performance of solutions for installation and construction of fiber optic network construction and the subsequent fast and efficient maintenance and troubleshooting testing.

Product

Modulated Sources and Receivers

-

California Scientific, Inc.

California Scientific, Inc.

CSI's modulated fiber optic sources are optimized for high-speed modulation up to 12.5 Gbps. The units are intended to be modulated by a pattern generator for testing the performance of optoelectronic components such as photodetectors and receivers. They are powered by wall plug units.

Product

Optical Transmitter

ST1015-10mW

-

Hangzhou Softel Optic Co., Ltd.

ST1015-10mW - Hangzhou Softel Optic Co., Ltd.

*Designed for FTTH(Fiber To The Home) Networks *Excellent Linearity and flatness *Single-mode fiber high return loss *Using GaAs amplifier active devices*Ultra low noise technology *Using DFB coaxial small package laser *Smaller size and easier install *Red-LED for power indication

Product

FAYb Laser Markers

LP-RF Series

-

Panasonic Industrial Devices Sales Company of America

LP-RF Series - Panasonic Industrial Devices Sales Company of America

The LP-RF200P Series FAYb Laser Marker features:- Compact IP64 Rated Head- Controller Offers High Resistance To Electrical Noise- Smart Functions To Adapt To Many Conditions- Direct Link To Image Processing Device- 17-Watt Fiber Laser- Removable Fiber Cable For Easy Installation

Product

GPS Master Clock

-

Signals & Systems India Private Limited

Signals & Systems India Private Limited

GPS Master Clock System – MCS-GPSMC-1010 is a 3U Card rack type, 19” Rack-mountable Redundant GPS Time Server which synchronizes and maintains the timing and frequency requirement of power and process industry equipment using a signal obtained from any one of the sources like GPS or GLONASS or Time protocols such as NTP and IRIG. It distributing the same time signal through several types of interfaces. It provides redundancy for Power and GPS receiver to increase reliability and offers protection against time synchronization failure. The system is field-upgradeable and an extremely flexible system, designed to handle time synchronization requirements today and in the future. It provides nanosecond accuracy when external time references are not available. It has a storage facility to store the system log file. It delivers NTP, SNTP, IRIG-B, PFC-Pulse, DCF77, BCD parallel data, Ethernet Fiber Optic & RS485/RS232 outputs. System enables configuration and monitoring through Web-based application. It supports a wide range of power supply either 90V-260V AC/DC or 18-36VDC or 36V-72VDC. Power supply model can be mixed and matched as required by the user, depending upon power supply options available at the installation site.

Product

Full Indoor Radio System

CFIP Marathon II

-

SAF Tehnika

CFIP Marathon II - SAF Tehnika

CFIP Marathon 300 MHz / 1.4 GHz point-to-point long-haul microwave system is the perfect solution for industrial applications where fiber is not available. Primarily designed for remote and rural areas Marathon Full Indoor Unit can establish a link in adverse weather conditions and over long distances, frequently exceeding 100 km. SAF Tehnika Marathon solution is particularly recommended for utility (electricity, water), oil & gas, public safety, and transport companies who are looking for reliable data & voice transmission.

Product

Multichannel Grating Spectrometer

PoliSpectra® Quad

-

HORIBA, Ltd.

PoliSpectra® Quad - HORIBA, Ltd.

Horiba’s OEM Polispectra Quad spectrometer is an integration of four VS70 spectrometers built around Horiba JY Type-IV flat-field aberration-corrected holographic concave gratings. This high throughput VIS spectrometer with 4 fiber inputs provides simultaneous acquisition of 4 channels at high speed with minimal crosstalk. The main electronics board is designed to read the two CCDs on the system simultaneously and provides 1-8X binning capability. This OEM system is a unique and innovative approach to drastically reduce the cost per channel.

Product

PC Control Tunable Laser Source Modules

UC9710xx

-

UC Instruments, Corp.

UC9710xx - UC Instruments, Corp.

The UC8710C, UC9710L and UC8710CL tunable laser modules offer superior performance in testing DWDM components, AWG & PLC components, and optical amplifiers, and performing other general- purpose fiber optical test and measurement applications particularly in fiber grating sensor fast sweep testing.

Product

Fully Portable Stand-Alone OTDRs

LOR-220

-

Luciol Instruments SA

LOR-220 - Luciol Instruments SA

The LOR-220 is part of the LOR-200 family of fully portable stand-alone OTDRs. The instrument is integrated in a Windows XP based PC-platform with touchscreen interface.The LOR-220 is based on Luciol's novel scanning photon-counting technology (US patent #7,593,098). It is the highest resolution instrument of this family, well suited for short range fiber testing in aviation, automotive and similar applications.

Product

Fabry-Perot Based Scanning Filter

-

Optoplex Corporation

Optoplex Corporation

This new type Fabry-Perot Based Scanning Filter (FPSF) is based on Optoplex proprietary fiber optical Fabry-Perot Etalon technology. It offers F-P based scanning filter with central wavelength at 1060nm, 1310nm, 1550nm or other customized wavelength. It can be tuned manually or automatically by scanning over a wide spectral range from 10nm to 100nm with bandwidth from 0.05nm to 1.0nm. FPSF features less than 3dB insertion loss and as high as 1kHz scanning frequency. Its unique high reliability and low insertion loss design presents the most cost-effective solution for OEM application from telecommunication to fiber sensing interrogation.

Product

Managed Ethernet Switch with L2/L3 Layer Support and Fiber Optic Option

ES2

-

North Atlantic Industries

ES2 - North Atlantic Industries

Ethernet Switch module, ES2 provides up to 16 10/100/1000 Base-T 1 Gb ethernet ports. Additionally, there is one 10/100/1000 Base-T maintenance port interface, one RS-232 maintenance/console port interface, and a Fiber-Optic channel with four 10 Gb ports. It also provides numerous L2 and L3 networking, quality of service (QoS) and security features available as described below.

Product

Desktop Variable Optical Attenuator

UC8310

-

UC Instruments, Corp.

UC8310 - UC Instruments, Corp.

The UC8310 Desktop Variable Optical Attenuator offer superior performance for channel balance, power equalization, gain tilt and power adjust of DWDM system, EDFA, AWG & PLC components, optical amplifiers, and other general purpose of fiber optical test and measurement applications.

Product

G3/G4 - 3/4 Module Solution

-

Virginia Panel Corporation

Virginia Panel Corporation

VPC's G3/G4 connector delivers unmatched versatility in a compact form, offering modular flexibility with either three 90 series or 4 iCon modules. This footprint supports up to 672 signal contacts-plus options for high-speed digital, coax, power, fiber optics, and more-making it a powerful solution for low I/O test environments.

Product

GPS over Fiber

-

CCI

CCI

*High Dynamic Range GPS to Fiberoptic Transmitter and Fiberoptic to GPS Receiver*Compact NEMA rated outdoor Fiber Transmitter provides +5VDC Bias for GPS Antenna LNA*Rack mounted Fiber Receiver provides 8 RF outputs and integrated monitoring and alarming*Cost effective solutions for distribution of GPS signal over long distance