Product

CAT-5 Video Receivers

-

Analog Devices Inc.

Analog Devices Inc.

Analog Devices high speed, differential CAT-5 video receivers and equalizers compensate for the transmission losses of UTP and coaxial cables up to 300 meters in length. Various gain stages are summed together to best approximate the inverse frequency response of the cable. Logic circuitry controls the gain functions of the individual stages so that the lowest noise can be achieved at short-to-medium cable lengths. Our video receivers provide excellent common-mode rejection that enables the use of low cost, unshielded twisted pair cables in noisy environments.

Product

Differenzial Probe

BumbleBee®

-

PMK Mess- und Kom­mu­nika­tion­stech­nik GmbH

BumbleBee® - PMK Mess- und Kom­mu­nika­tion­stech­nik GmbH

Bum­ble­Bee® is a 400 MHz, 1 kV CAT III high-volt­age, dif­fer­en­tial probe, that can be used with anyos­cil­lo­scope or de­vice pro­vid­ing 50 Ω ter­mi­na­tion.

Product

Triple Alarm CAT IV Non-Contact Voltage Detector with Flashlight

FLIR VP50-2

-

Teledyne FLIR

FLIR VP50-2 - Teledyne FLIR

The FLIR VP50-2 is a durable, CAT IV-rated non-contact voltage detector featuring light, vibration, and beeper feedback alarms and a powerful LED flashlight. Use the VP50-2 to reliably check if an AC circuit is live before beginning work; detect voltage on exposed conducting parts or through insulation; identify live wires within electrical panels, switches, and outlets; or trace live wires and map circuits. With an ergonomic and drop-tested design, the FLIR VP50-2 is the right choice for professionals performing field troubleshooting and verification of electrical installations within residential, commercial, and industrial buildings.

Product

Clamp Meters

-

Southwire Tools

Southwire Tools

Clamp meter is a rugged high end AC clamp meter. With a UL listed safety rating of CAT IV 600V / CAT III 1000V, this clamp meter is built to get the tough jobs done.

Product

Phase Sequence Indicator

8PK-ST850

-

Prokit's Industries Co., Ltd.

8PK-ST850 - Prokit's Industries Co., Ltd.

Two functions in one unit incluidng open phase and phase sequence. Large size alligator clips : able to clip on switch-board terminals easily. Identify 3 phase sequence and open phase check Ideal for installing conveyor lines, pump systems and interconnected drivers. No exposed metal parts. Safety features are incorporated throughout, including the pushbutton switch designed to minimize damage due to negligence. Safety approval: CE marks, IEN 1010 CAT. II.

Product

Rechargeable Multifunction Tester

ET4000

-

Martindale Electric Co. Ltd

ET4000 - Martindale Electric Co. Ltd

The new ET4000 tester carries out all the tests needed to verify the safety of electrical installations in domestic, commercial and industrial wiring installations in accordance with the latest regulations.

Everything about the new ET Series has been designed to save time and make testing easier.

Fast, reliable high current and non-trip loop testing comes as standard together with a high level of input protection and a CAT IV safety rating .

Supplied with a full range of accessories.

Product

Testability analysis

-

ASTER Technologies

ASTER Technologies

Using TestWay, ASTER provides advanced Testability report, Rules checking for In-Circuit Test, Functional Test and Boundary-Scan test. Test point optimization – Up to 70% of test points saved, automated backannotation to CAD system and CAD/CAM/CAT tools.

Product

DIGITAL MULTIMETER, MEAN VALUE, 10A, 1KV

72-13580

-

Tenma

72-13580 - Tenma

*Digital multimeter with 6000 counts display*CAT III 1000V, CAT IV 600V safety rating*Manual function select and auto ranging*LCD backlight and 0.1% to 99.9% duty cycle*Data hold, max/min/relative modes*61 segments analogue bar graph*RS232 interface*Input protection*Powered by 9V (6F22) battery*12-month limited warranty *view Terms & Conditions for details

Product

Fiberglass Telescoping Handle for the High Voltage Contact Tester

HV-43

-

Klein Tools, Inc.

HV-43 - Klein Tools, Inc.

Used for checking voltage up to 1,000V AC.Connects to the hot stick end of the High-Voltage Contact Tester (Cat. No. HVCT1).Dielectric pole type-tested & rated for 10kV AC.Comes in a convenient zippered pouch.

Product

Coil Analyzers & Power Supplies

-

IBEKO Power AB

IBEKO Power AB

Coil analyzers and power supply units are portable and lightweight devices intended for use in harsh switchyard and industrial environments. The typical application is switchgear and circuit breaker testing when substation battery is not connected or available. An advantage over substation battery is enabled testing in under-voltage and over-voltage conditions. Furthermore, the stable voltage outputs with a very low ripple (<0,5%) enable an analysis of the coil and motor current graphs recorded with circuit breaker analyzers from different vendors.SAT40AD, POB30AD, and POB40AD are unique devices in the market due to their dual purpose:Power supply for coils and spring-charging motorsTesting circuit breaker’s coils, motor, and auxiliary circuitAll DV Power coil analyzers and power supply units have four separate outputs for opening and closing coils.SAT40AD has two powerful motor outputs (AC and DC) which can withstand up to 40 A inrush current.POB30AD and POB40AD have DC motor output rated up to 30 A and 40 A respectively. With the use of motor outputs, POB and SAT can also be used as a power source or a temporary battery charger.SAT40A II series instruments can be controlled via PC. The DV-Win application software is used to control both SAT and CAT (Circuit Breaker Analyzers & Timers) devices at the same time, making a unique test system for switchgear and circuit breaker testing.

Product

High Voltage Probe

CP-3308R

-

PINTEK Electronics

CP-3308R - PINTEK Electronics

*100:1 scope probe *300MHz Bandwidth *Read out Function *Division Ratio x 100 *100MΩ Fix Input Impedance *1500V DC Working Voltage (CAT Ⅱ) *2000V AC peak to peak MAX. (CAT Ⅰ) *CE Approved.

Product

Differential Probe

DP-16V

-

PINTEK Electronics

DP-16V - PINTEK Electronics

*MAX. Input Voltage: ±8KV DC or 16KV p-p or AC 5.6KV rms*Bandwidth: DC-50MHz*Input Impedance 30MΩ// 1.5PF*x20, x200, x2000 Attenuator*To Ground MAX. Voltage: 8KV CAT III*Output Impedance 50Ω

Product

High Voltage Probe

HVP-40M

-

PINTEK Electronics

HVP-40M - PINTEK Electronics

*DC 40KV CAT II Pollution 2*600MΩ Impedance*25KV ± 2%, 40KV ± 3%*T.C. 200 ppm/oC*Positive Polarity only.*Resolution 1KV*Need not power.*CE, TUV GS, UL, CUL, IEC1010

Product

Junior Set and Kits

-

Beha-Amprobe

Beha-Amprobe

Contents* AM-510-EUR (Digital multimeter)* ACD-10 PLUS (Digital current clamp)* TPP1-C1 (contact thermometer)* EU-200 (test lead set with 2 leads), 2 test prods (4 mm), 2 crocodile clips (CAT III/1000 V)* Hard carrying case

Product

Digital LCR Multimeter

MT-5211

-

Prokit's Industries Co., Ltd.

MT-5211 - Prokit's Industries Co., Ltd.

MT-5211 is a Fully featured multimeter with LCR meter. Ideal for a wide variety of electrical and electronic testing applications. Comply with CAT IV 600V.

Product

Battery Tester

CS-3001

-

G. Jost -Electronic

CS-3001 - G. Jost -Electronic

The CS-3001 test system records all block voltages, total voltage and current during a discharge test. The modular design makes it easy to connect most of all battery installations, starting from a single block and ending up with 960 block voltages. Up to four parallel strings can be tested. All measuring modules are electrically isolated (600VDC CAT III, 5000VAC test voltage).

Product

Clamp Sensors

-

Kyoritsu Electrical Instruments Works, Ltd.

Kyoritsu Electrical Instruments Works, Ltd.

Can measure AC current up to 1000A Flexible and light weight by the air core coil used at the sensor part Designed to meet the international safety standard IEC 61010-1 CAT IV 300V, CAT III 600V

Product

KYZ Indicator and Tester

1031-C3, 1031-C6

-

TESCO

1031-C3, 1031-C6 - TESCO

More than just an indicator, TESCO’s KYZ Indicator and Tester Cat. 1031-C3 (3-wire) and 1031-C6 (6-wire) can also be used to perform accuracy testing of KYZ pulses on all TESCO Next Generation Test Equipment. TESCO’s KYZ Indicator and Testers can be used as a pulse input using the same pickup connection on the front panel of all TESCO Next Generation Test Equipment.