Survey Meters
See Also: Gamma Survey Meters
-
product
Meter Testing
METES
Meter test systems with high accuracies of up to 0.02% and a wide measuring range for precise measurements in single- and three-phase applications. The meter test systems of the METES series are used to test the accuracy of Ferraris meters and electronic electricity meters under any operating conditions. The impact of system perturbations such as harmonics or flicker on the meter can be taken into consideration during tests.
-
product
Milli Ohm Meters
Teledyne Test Tools series of D.C. Milli-Ohm meters offer two models T3MIL50 and T3MIL50X, which features a 3.5-inch TFT display with a measurement accuracy of 0.05%, maximum 50,000 count measurement display and sampling rate of 60 readings per second. The T3MIL series also provides four wire measurement as well as temperature measurement and temperature compensation functions to meet the requirements of low resistance measurement applications.
-
product
Insulation Resistance Meter
AMIC-2505
Measurement of insulation resistance: 500,1000 and 2500V (2TΩ) ; 2 and 3 wire method ; Measurement of DC and AC voltages at 0...600V ; Measurement of leakage currents
-
product
Metering Systems
Gear Metering Pumps and Meter Mix Dispense Technology for reliable production and consistently high product quality.
-
product
Broadband Field Meter
NBM-550
*Intelligent probe interface detects probe parameters*Fully automatic zero point adjustment*Memory for saving up to 5,000 measurement results*PC software for convenient data management*Voice recording for comments*Conditional logging: Measured value saved when a threshold value is exceeded
-
product
On-Board Flow Meter
DF-2200
The DF-2200 On-Board Flow Meter is a compact on-board fuel flow meter developed for our FP series Volumetric Flow Detector*. The compact body is equipped with functions such as flow rate/temperature/pressure measurement and CAN communication required for fuel consumption measurement. Adopting the same size as our CT-6700 Engine Tachometer, it can be used by stacking two units in a limited space. In addition to 12 to 24VDC of power source, an AC adapter is available as an option, which is sufficient for not only on-board measurement but also engine bench evaluation.
-
product
PH Meters
TES Electrical Electronic Corp.
pH, mV, Conductivity, TDS Resistivity Salinity Concentration and Temperature measurement functions
-
product
AC/DC Clamp Meter
CM4374
• AC/DC Clamp • True RMS • 600/2000 A range • V, A, Hz, Ω, and other extensive measurement parameters • Inrush current • Max/Min/Avg/Peak • Wireless data download to a tablet or smartphone
-
product
Intelligent Digital Gauss Meter / Tesla Meter
DX-180
This extremely high-precision instrument is suitable for the vast number of applications. It provides a wide-range measurement from DC to up to 100 kHz AC magnetic field measurement. It also has functions of auto-zeroing and auto-range.
-
product
Intelligent Digital Gauss Meter / Tesla Meter
DX-160
DX-160 Full-digital high-precision gaussmeter/teslameter is designed for high-test precision, high-resolution magnetic field test applications. It provides a wide-range measurement from DC to up to 50kHz AC magnetic field measurement.
-
product
Lux / Illuminance Meters
PeakTech Prüf- und Messtechnik GmbH
Iis a precise measuring device which is suitable for measuring the illuminance of LED lights, fluorescent or conventional filament lamps with different light colors. The measurement is carried out in lux (lx), foot candle (fc) or candela (cd). Simple lux meters are mostly only for the measurement of standard light e.g. Filament lamps with a color temperature of 2856 K are suitable and deliver inaccurate measurement results at different color temperatures.
-
product
EZ-View Flow Meters
Hedland EZ-View flow meters provide a lower cost alternative to standard Hedland flow meters. Made from high-impact thermoplastics like polysulfone and Radel, these variable area meters (rotameters) contain a minimum number of moving parts, offering a reliable, trouble-free flow rate indicator. Fittings, available in brass, stainless steel and PVC, with NPT or BSP ports, allow the meter to be installed in a wide variety of applications. Meters can be used in oil and water processes, with the ability to add a flow switch, which can be used to trigger alarms.
-
-
-
product
Power Meters
Chroma Systems Solutions, Inc.
Chroma’s Digital Power Meters are designed for both single-phase and multiple phase measurements of AC power signals and related parameters common to most electronic products. Instead of traditional analog measurement circuits the 66200 Digital Power Meter uses state-of-the-art DSP digitizing technology. The internal 16 bits analog/digital converters with sampling rates of up to 200KHz provide both high speed and high accuracy measurements which is unprecedented within the industry for this class of power meters current on the market.
-
product
Slip Speed Meter
Aarohi Embedded Systems Pvt. Ltd
“ AAROHI” make Digital slip- Speed meter is very compact & specially designed microprocessor based instrument to measure r speed (RPM) of submerged induction motor with state the art technology.
-
product
50Hz-100kHz LCR Meter
11022/11025
Chroma Systems Solutions, Inc.
0.1% basic accuracyTransformer test parameters (11025), Turns Ratio, DCR, Mutual Inductance0Hz, 60Hz, 100Hz, 120Hz, 1kHz, 10kHz, 20kHz, 40kHz, 50kHz, 100kHz test frequencies21ms measurement time (≥100Hz)Agilent 4263B LCR Meter commands compatible4 different output resistance modes selectable for non-linear inductor and capacitor measuringHigh resolution in low impedance(0.01mΩ) and high accuracy 0.3% till 100mΩ rangeAdjustable DC bias current up to 200mA (constant 25Ω) (11025)1320 Bias Current Source directly control capability0.01mΩ ~ 99.99MΩ wide measurement range (4 1/2 digits)Dual frequency function (11022 option) for automatic productionBIAS comparator functionComparator function and 8/99 bin-sorting functionPass/fail judge result for automatic productionHandler interface trigger edge (rising/falling) programmableTest signal level monitor functionStandard RS-232, GPIB, and Handler I/FOpen/short zeroing, load correctionLabView® Driver
-
product
TPS-Effusivity Meter
Thermal Effusivity (W√s/m2K) is described as a materials ability to exchange heat with its surroundings. Surface haptics is a branch of psychology, describing the sense of touch, localized to the skin surface. The feeling of warmth and coolness (thermal effusivity) makes up the feeling of comfort, or the desired effect, which goes into the touched material surface. This is an important field of measurement for textiles, fabrics and solids.
-
product
Digital Power Meter
It is a power meterwith superior performance an powerful functions. In addition, it has simple structure and operation.
-
product
UV Meters
OAI’s UV Measurement Instrumentation are the standard for Semiconductor Lithography, MEMS, Sensors, Microfluidics, UV Curing, 3-D Printing, Sterilization, Water Purification and Solar/PVC industries. For over 45 years our meters have earned a reputation for accuracy, repeatability and dependability. We offer full calibration and support services worldwide.
-
product
Photomedicine Light Meters
Light meters for the measurement of optical radiation in therapeutic, diagnostic, ophthalmological, and endoscopic applications.
-
product
STIPA Meter
Bedrock SM50
STIPA has become the industry standard for measuring the Speech Transmission Index. The Bedrock SM50 STIPA meter is the device that many have been waiting for: finally a STIPA meter that is accurate, reliable and affordable at the same time! Designed from scratch by the very team that invented STIPA and was responsible for the development of the Speech Transmission Index for the last few decades.
-
product
Gloss Meters
Applications: All kinds of coating and finishing surfaces, such as paints, varnishes, printing ink, etc.Decorative materials, such as marble, granite, polishing brick, ceramic tile.The other kinds of materials and objects, such as plastic, woodenware, paper, etc.Small, smart, stableSimple to use
-
product
Milliohm Meters
Chroma 16502
Chroma Systems Solutions, Inc.
With a basic accuracy of 0.05%, Chroma 16502 offers a 0.001mΩ ~1.9999MΩ wide measurement range. It provides measurement range with 4 1/2 digits resolution. The fast measurement time is 65 ms. It suits component evaluation on production line. Pulsed test current output mode is used to reduce thermal EMFs affection on milliohm measurement. DC test current output mode is used to fasten measurement speed for inductive DUT. Dry-circuit test current output mode is used to measure such contact resistances where the maximum open-circuit voltage must be limited to 20mV.
-
product
Sky Quality Meter
SQM-L
An affordable meter for measuring sky brightness for astronomers! The "Sky Quality Meter - L" measures the brightness of the night sky in magnitudes per square arcsecond. Unprecedented sensitivity in a handheld meter!
-
product
Meter Test Bench
Meter Test Banch is available with high-technology to ensure high testing accuracy as well as maximum functionality. It is designed to provide precise results in any simple to complex testing. It comes with modern systems to ensure to provide artificial load that cannot be changed in the power supply. It is provided with high durability and efficacy to ensure long lasting life with no maintenance. In addition to this, it ensures high accuracy in testing without any wear.
-
product
Pinless Moisture Meter
A large number of boards can be scanned quickly without leaving pin holes. No effort is needed to insert pins into hard wood.Pinless moisture meters measure lower moisture contents in hardwoods than pin moisture meters.
-
product
Turbine Flow Meters
CT60, CT150
Flows up to 150 lpm (40 US gpm)Pressure up to 420 bar (6000 psi)Choice of 4-20mA and 0-5V outputs2-3 top ports as std for temperature / pressureBSP or SAE inlet / output portsFor use with oils, fuels, phosphate-estersBi-directional
-
product
DSE Moisture Meters
Our Moisture Meters are suitable for any biomass and are today used in many different applications. The technical principle is based on microwaves being sent through the bale of biomass from one side to the other thus measuring a huge amount of material, and hereby ensuring that the moisture value calculated is not only based on a small random sample.
-
product
Sound Level Meter
Shanghai Beha Electronics Co., Ltd.
The 8002 sound level meter is a general purpose test instrument. The instrument is an important support for sound level determination for the installation and service electrician in industry and handcrafts as well as for the home applications.
