-
product
Automatic Titrator
Large color TFT-LCD with a touch panel (8.4-inch) enables easy key entry.Up to 4 titrators, MKV-710B Volumetric, MKC-710B Coulometric or MKH-710/2nd Hybrid Karl Fischer moisture titrators or additional AT-710B potentiometric titrators, can be connected and simultaneous measurement is possible.Monitoring temperature during titration ensures safe measurements.
-
product
Zeta Potential & Particle Size Analyzer
AcoustoSizer II
The new AcoustoSizer IIs provides thorough characterization of concentrated colloidal dispersions. Directly measuring particle size, zeta potential, pH, conductivity, and temperature, it furnishes the most comprehensive analysis available in a single, turnkey instrument. Based on a flow-through sensor design, the AcoustoSizer IIs can be used in a laboratory batch analysis mode or connected directly to a process slipstream. Built-in syringe pumps provide automated potentiometric and volumetric titration capabilities for accurate isoelectric point and surfactant addition determination.
-
product
Karl Fischer Titration
Gas Analyzer
A fully automated solution to determine trace levels of water in liquefied and permanent gases.
-
product
Process Analyzers
202X Series – single-method process analyzers
Single-method process analyzers for water and wastewater monitoring with titration, pH, ISE, or photometry methods.
-
product
Titration
Titrando
Titrando titrators have been developed to meet exacting titration demands. These titrators come with a wide range of security and traceability options, making them particularly suitable for use in regulated industries. Titrandos are capable of performing all common titration types and offer a host of automation and control options.
-
product
Drop Counter Logger Sensor
NUL-223
This sensor enables to count automatically drops and bubbles. It is perfect for titrations. Combined with the pH sensor it gives a very nice titration curve.
-
product
Karl Fischer Titration
OMNIS KF
New volumetric Karl Fischer titrator for safe, easy, and fast water content determination
-
product
Electrochemistry Research Equipment
Our electrochemical equipment will help your group achieve laboratory and research goals. The best-selling EZstat Pro potentiostat/galvanostat can run cyclic voltammetry, electrochemical impedance spectroscopy (EIS), battery tests, and high speed galvanostatic intermittent titration technique (GITT). The EZstat HV potentiostat delivers up to 1 amp at 25 volts. The Powerstat comes in two configurations (5 amp vs 20 amp). The Duostat bipotentiostat can operate rotating ring-disk electrode experiments. The Arraystat and ArrayPGstat feature multichannel operation with different customizable options (current range, number of channels, etc.).
-
product
Single Parameter Test Kits
The single parameter test kits make it easy to determine specific parameters on site or in the laboratory. Different platforms offer a range of options - from easy-to-use, inexpensive drop count titration to high-precision digital titrator kits. Hach test kits include everything you need to get started with your determinations right away. This includes the necessary equipment and a complete set of reagents, all in a sturdy Hach transport case.
-
product
Titration
Ti-Touch
Designed as an easy-to-use and compact system, it is equipped with a variety of features to make your work more comfortable: color touch screen, shortcuts for favorite methods, a second port for an additional titration stand and buret, and many more.
-
product
Drop Count Titration Test Kit
Dropper titrations are a simple and cost-effective way to test many of the most common parameters, including chlorine, chloride, dissolved oxygen, carbon dioxide, sulfite, nitrogen, formaldehyde and more. The kits can be used in mobile applications or in the laboratory for a quick reference comparison.
-
product
Hardness & LSI Titration Kit
Ultrameter™ III 9PTKB
The Ultrameter III 9P™ AHL Titration Kit, is based on the tried and tested design of the Ultrameter II™. The 9P adds the ability to perform in-cell alkalinity and hardness titrations either as stand-alone measurements or as part of an LSI calculation. Alkalinity, hardness, pH and temperature values can be manipulated in the LSI calculator to predict the effect of changes on water balance. Measurements are extremely accurate. And the 9P is simple to operate and maintain.
-
product
Automated Titration Analysis Systems
MANTECH is a leading manufacturer of multi-parameter and titration analysis systems. We can deliver custom analysis systems that perform the following functions: pH, Chloride, Oxygen, Turbidity, Alkalinity, Fluoride, Oxidation-Reduction Potential (ORP), Nitrate, Electrical Conductivity, Color, Salinity, Total Hardness, Acidity, Ammonia, Temperature and Soil pH & Conductivity.
-
product
Calcium Logger Sensor
NUL-238
The NeuLog calcium sensor enables measurements of ionic calcium (Ca2+) concentration in aqueous samples. This measurement is very important when evaluating water quality. It can also be used to determine calcium magnesium by EDTA titration.
-
product
Alkalinity Analyzer
Model 6800T
Teledyne Analytical Instruments
The 6800T Series Analyzers are a family of on-line sequential sampling analyzers that use various automated analytical technologies to perform an analysis. When configured for alkalinity measurements, titration technology is used for the most cost effective, ease of use and low maintenance method.
-
product
Fully-Automatic Kjeldahl Analyzer
LD-LKA-C10
Fully-automatic Kjeldahl AnalyzerLD-LKA-C10conducts titration and distillation simultaneously so as to neutralize the ammonia gas released which enhance the test efficiency and avoid the overflow of ammonia. It stand with a measuring range from 0.1 to 200 mgN which gives a maximum recovery of ≥ 99.5 %. The operating ambient temperature of the device starts from 10 °C to 35 °C. 8.0-inch LCD touch screen is used to set the distillation time, the amount of diluent, acid liquor and alkali. Diaph...show more -
product
Karl Fischer Titration
KF Titrino plus
Entry-level titrator for coulometric (water content: 0.001 to 1%) or volumetric (up to 100%) water determination.
-
product
Titration
A typical titration begins with a beaker or Erlenmeyer flask containing a very precise volume of the analyte and a small amount of indicator placed underneath a calibrated burette or chemistry pipetting syringe containing the titrant. Small volumes of the titrant are then added to the analyte and indicator until the indicator changes, reflecting arrival at the endpoint of the titration.
-
product
Total Base Number Titrator
K633
Chongqing Kailian Yongrun Industrial Co.,Ltd.
It is designed to measure base number of petroleum products.Conforms to SH/T 0251, ASTM D2896Contains automatic potentiometric titrator and titration deivce etc.Makes use of acid-alkali neutralization principle, perchloric acid potentiometric titration method and potential changes to determine base number.
-
product
Karl Fisher Titrators
Karl Fischer titration is widely used for direct analysis of water content in various industries, as a reliable and healthy method. In food industry it is used for water content determination in fruit juices, honey where as it is needed in petroleum industry to check the water content in different oils, also in cosmetic industry for determination of water in the products. It is required in pharmaceutic industry for raw materials, active substances, lyophilized substrates, tablets, ointments, oils.
-
product
Titration
Titrino plus
These instruments offer excellent value for money and are a reliable partner in your lab.
-
product
Trace Moisture Analysis System
Analyzing moisture, and how much of it, is critical to the performance of petroleum products, as well as infrastructure and product integrity. For example, moisture in petrochemical feedstock can cause pipelines and valves to freeze, as well as poison some catalysts. One popular method used to analyze for moisture is Karl Fischer Titration (KFT). KFT has a wide dynamic range but has difficulty in measuring relatively low amounts of moisture. In addition, there are the well-known problems of side reactions and known interferences.
-
product
Base Number Tester
LD-LAAT-A13
LabodamLD-LAAT-A13is composed of automatic potential titrator and titration device. It is designed according to Industry Standard of Petrochemical and follows ASTM D2896 and ASTM D4739 Test Methods for Base Number of Petroleum Products.
-
product
Karl Fischer Titration
KF Titrando
High-end titrators for determining any water content from 0.001 to 100%
-
product
pH Logger Sensor
NUL-206
This sensor can be used to measure the static pH values of common liquids (water, milk, soft drinks, vinegar, etc.) as well as the changing values in titrations or experiments such as those looking at the effect of antacids.
-
product
Isothermal Titration Calorimeters
MicroCal ITC Range
The "Gold Standard" for measuring binding affinity and stoichiometry. MicroCal ITC isothermal titration calorimeters are used to study a wide range of biomolecular interactions. The applications range from drug design to fundamental research such as the understanding and regulation of signal transduction pathways. These systems deliver direct, label free and in-solution measurements of binding affinity and thermodynamic parameters in a single experiment. They have high sensitivity, low sample c...show more -
product
Titration
Eco Titrator
You can't compromise on quality, that's for sure. And quality comes at a price. But that doesn't mean you have to spend a fortune. We have put our decades of titration expertise into the new Eco Titrator while keeping the price low. The result is a titrator for all standard potentiometric titrations that is robust, precise, and affordable.
-
product
Kjeldahl Analyzer
LD-LKA-A10
Kjeldahl AnalyzerLD-LKA-A10is a complete microcomputer controlled user-friendly automatic device integrating distillation and titration functions. It is compatible with 42 mm digestion tubes and has features such as automatic waste discharge and cleaning of digestion tubes and titration cups, control steam flow and real time detection of distillation temperature. Along with High-accuracy Charging Pump and Titration system, it is also equipped with large LCD touch screen panel, faster ARM system and multiple fluid level detection system to ensure smooth test process.
-
product
Isothermal Titration Calorimetry
ITC instruments are designed for the most challenging life science laboratory environments that require high sensitivity, high productivity and the most advanced ITC technology.
-
product
CAPS True NO2-NOX-NO Analyzer
Model N500
Teledyne Advanced Pollution Instrumentation
The Model N500 CAPS NOx analyzer uses superior Cavity Attenuated Phase Shift (CAPS) Spectroscopy to measure True NO2, NOx, and NO gases. The instrument combines direct NO2 measurements with highly efficient gas phase titration (GPT) to convert and measure the NO gas component. An automatic baseline reference cycle accounts and compensates for any potential baseline drift due to varying environmental conditions.
