Product

Individually Configurable Cabinet Frame System

TechFrame_40

-

ELMA Electronic, Inc.

TechFrame_40 - ELMA Electronic, Inc.

The aluminum cabinet frame specially developed for rail vehicles has no welding points thanks to uniquely designed corner connections. This enables precise configurations to customer-required dimensions.

Product

RF Shielded Box

LTL B12001

-

Liveon Technolabs

LTL B12001 - Liveon Technolabs

LTL B12001 RF Test Enclosure is the streamline solution to manage your RF Testings. LTL B12001 RF shielded test enclosure can comfortably houses the intermediate and large devices on test such as Laptops, larger test Fixtures and other large RF devices.LTL RF Enclosures are available in aluminum and stainless steel models and come with a specialized EMI gasket which enables stable and effective RF shielding performance in all frequency bands.

Product

Shield Level / Pathloss Equipment

SG1000B/PR1000A

-

Praxsym

SG1000B/PR1000A - Praxsym

The SG1000 Signal Generator and PR1000A Preamplifier have been designed to simplify the measurement of shielding integrity in a shielded enclosure. When coupled with a high stability spectrum analyzer and an appropriate selection of test antennas, the SG1000/PR1000A combination can measure shielding effectiveness at all of the NSA 94-106 (supersedes NSA 65-6) defined test frequencies from 1 kHz to 10 GHz.The PR1000A amplifies the received signal from the test antenna and overcomes the high noise figure of the companion test receiver or spectrum analyzer. The PR1000A will ensure that the system noise figure will be less than 4.5 dB at all test frequencies from 1 kHz to 10 GHz. When used with a spectrum analyzer measurement bandwidth of 100 Hz, the system exhibits a sensitivity of -150 dBm at the test antenna output.​To overcome high cable loss between the test antenna and the PR1000A assembly at 10 GHz, a remote low noise pre-amplifier (Praxsym PN 310-010091-001) is mounted directly onto the 10 GHz antenna.

Product

K Series Bass Cabinets

-

TC Electronic A/S

TC Electronic A/S

High-Powered Bass Cabinets with Custom-Voiced Turbosound Speakers and Vintage Design.

Product

uSD Logger Shield

IFB-11001

-

Playing With Fusion Inc

IFB-11001 - Playing With Fusion Inc

This micro SD logger shield enables time-stamped logging of any signals measured by your Arduino project! Whether sensor shields, breakout boards or datalink connections, this shield will get your logger project up and running quickly. We've included an MCP79410 Real-Time-Clock module for flexible supply voltage timekeeping, which includes an on-board battery holder for a CR1220 battery (included, and is installed). In addition, the micro SD card is interfaced through a high-speed translator IC and supplied with a high-current LDO to meet the demands of the SD standard. Each pin of the Arduino has an offset pin attached for easy wiring to the massive 13x9 pin prototyping area, including the pins connected to the ICSP header! Whether you're using a Mega, Due or Uno, this board has your interfacing needs covered! Finally, the micro SD holder is a push to lock, push to unlock type, which makes it really easy to both install and uninstall your card.

Product

RF Shielded Test Enclosure, Large, Yet Benchtop Enclosure

JRE 2525

-

JRE Test, LLC

JRE 2525 - JRE Test, LLC

Originally designed for testing rack mounted RF Sensing equipment, the roomy JRE 2525 is ideal for large wireless devices such as; Rack Mount Mesh Network AP's, Cellular/LTE/4G Base Stations, Wireless Laptops, Test Fixtures for testing Large RF Modules, and other large RF devices.

Product

RF Architectural Shielding Products

-

LBA Group, Inc

LBA Group, Inc

EMI (Electromagnetic Interference) is often used interchangeably with RFI (Radio Frequency Interference). However, EMI can be any frequency of electromagnetic noise, whereas RFI is a relatively narrow range of electromagnetic noise on the EM spectrum. EMI Shielding can be used to mitigate electric and magnetic radiation across various spaces. Radio Frequency (RF) Shielding can be used to mitigate RFI with specifically designed enclosures that can block RFI. As well, RF Shielding can include application of RF Shielding paints, fabrics, and other materials.

Product

Quadruple Function Tester with Shielded HF Test Chambers

UTP 9011 RF

-

NOFFZ Computer Technik GmbH

UTP 9011 RF - NOFFZ Computer Technik GmbH

Circuit boards are the heart of all electronic devices. To ensure the reliable function of these boards, detailed tests are essential.Our board-level tester UTP 9011 RF works safely, quickly and cost-optimized at circuit board level. Our interchangeable adapters are particularly efficient in this system, with which you can even test different test items at the same time. The shielded NOFFZ HF test chamber always ensures consistently good results.

Product

Full Extension Quick Disconnect Slides for 20"D Cabinets

IMS-85-A-19

-

ELMA Electronic, Inc.

IMS-85-A-19 - ELMA Electronic, Inc.

Friction slide yellow zinc steel slides. Ideal for mounting chassis into cabinets.

Product

42-Pin Male Nano-Pitch To 42-Pin Male Nano-Pitch, Shielded OCuLink Cable

785486-01

-

NI

785486-01 - NI

Nano-Pitch Male to Nano-Pitch Male OCuLink x4 Cable, 1 m

Product

VXI Module Shield Kits

-

ICS Electronics

ICS Electronics

*Enclose any VXI module with these one, two and three slot-wide kits. All kits include side shields, a pre-machined blank front panel, ejector handles, all necessary hardware and assembly instructions. *Easy PCB layout using our CAD layout aids. All kits are available with customized front panels and side shields.

Product

RF Shielded Test Enclosure, Largest Rack Mountable Enclosure

JRE 1724

-

JRE Test, LLC

JRE 1724 - JRE Test, LLC

Originally designed for testing wide screen laptops, the rack-mountable JRE1724 is ideal for large wireless devices such as; Mesh Network AP's, Cellular/LTE/4G Base Stations, and other large RF devices. Featuring rugged welded aluminum construction, you can be assured of its tight RF shielding effectiveness. Long life door gasket material along with double edge engagement not only provides solid RF shielding, but smooth trouble free operation over its lifespan. Internal struts keep the lid open for easy internal access when connecting the device under test.

Product

RF Shielded Test Enclosure, Ideal for tall RF devices

JRE 3036

-

JRE Test, LLC

JRE 3036 - JRE Test, LLC

For testing tall devices, the JRE 3036 is ideal! Large enough to fit entire computer systems inside, as well as their associated components, everything will be securely isolated from the outside world. Featuring rugged welded aluminum construction, you can be assured of its tight RF shielding effectiveness.

Product

RF Shielded Box

TS7124

-

Rohde & Schwarz GmbH & Co. KG

TS7124 - Rohde & Schwarz GmbH & Co. KG

R&S®TS7124 RF shielded boxes enable reliable and reproducible measurements in shielded test environments. The R&S®TS7124 shielded box provides high shielding effectiveness, a good antenna coupling factor and a rugged mechanical design for reproducible results. RF test boxes have been designed not only for product designers or product optimization but also for production lines of wireless devices under test. The soft close feature makes the shielded box safer to operate.

Product

802.11a,b,g RF Shielded Test Enclosure

JRE 0814-A

-

JRE Test, LLC

JRE 0814-A - JRE Test, LLC

Testing tall devices? The 0814-A stands up to any test up to 18 GHz! Featuring a wide swing open door with durable latch handle, this enclosure is ideal for testing IEEE 802.11 a,b,g devices such as; WLAN, VoIP, access points and other RF devices.

Product

Shield

Arduino MKR Mem Shield

-

Arduino

Arduino MKR Mem Shield - Arduino

Are you developing a complex IoT device with your MKR board and running out of memory? Add Flash memory and microSD storage to your MKR board, and allow over-the-air updates, with the Arduino MKR MEM Shield.

Product

Shield Level / Pathloss Equipment

PAMS & PAMS-C

-

Praxsym

PAMS & PAMS-C - Praxsym

PAMS is a user-friendly, transmitter and receiver system that measures shielding effectiveness in RF shielded enclosures.   Lightweight and compact, each PAMS unit measures approximately 12” x 5” x 5” and weighs 5.5 lbs., making PAMS ideally suited to field measurement tasks.  Rugged construction insures instrument survivability in a field test environment. PAMS-C is a simple and efficient solution for quickly identifying shielding faults in an RF shielded enclosure.  Cousin to the original PAMS used extensively by customers operating RF Shielded Enclosures, PAMS-C gives commercial end-users everything needed to measure shielding effectiveness levels of critical infrastructure - all with minimal or no interruption to normal operations.

Product

Cabinet Style Steri-Dry™ Lab Sterilizer

-

Gruenberg

Gruenberg

The Gruenberg Steri-Dry™ Dry Heat Lab Animal Science Sterilizer provides the animal care market with equipment to sterilize animal habitat cages through the process of dry heat sterilization. These dry heat sterilizers are designed and built for lab animal science applications.