-
Product
Type T
-
Highly accurate temperature sensors known for their stability in sub-zero and cryogenic environments.
-
Product
Micropositioner
-
Our broad range of micropositioners fill requirements for probing for different measurement applications as well as measurement environments. For example, a measurement system focused on cryogenic environments would not use the same product for room temperature probing. Likewise, a DC micropositioner is unfit for mmW measurement applications.
-
Product
Multipurpose Thermometer-Rechargeable With Linearized Ouput
BAT-10R/LOP
-
This versatile thermometer has a wide temperature range and can be used in applications as diverse as cryogenic measurements for blood banking and cryosurgery, skin temperature measurements in exercise experiments, liquid measurements in spectrophotometer cuvettes, melting points of plastics and all types of animal and insect temperature measurements.
-
Product
Monitoring Systems
-
Our bestselling Accsense Ethernet Temperature Datalogger is designed for cost-effective temperature measurement and alarm in medical refrigerators, freezers, cryogenic storage and incubators. We also provide additional models of Accsense data loggers which monitor additional values including humidity, digital, pressure, and more.
-
Product
Cryogenic Lab Applications
-
Lake Shore products are used in a large variety of applications. Find your application here to see the recommended products.
-
Product
X-Ray And Gamma Detector Systems
-
The XR-100CR is a new high performance x-ray detector, preamplifier, and cooler system using a thermoelectrically cooled Si-PIN photodiode as an xray detector. Also mounted on the 2-stage cooler are the input FET and a novel feedback circuit. These components are kept at approximately -55 °C, and are monitored by an internal temperature sensor. The hermetic TO-8 package of the detector has a light tight, vacuum tight thin Beryllium window to enable soft xray detection. The XR-100T-CdTe represents a breakthrough in xray detector technology by providing “off-the-shelf” performance previously available only from expensive cryogenically cooled systems. The XR-100-CdTe is also suited for measuring gamma rays.
-
Product
Geo / Cryogenic / NDE Instrumentation
-
Tristan designs and fabricates custom magnetometer systems to study the magnetic properties of samples. SQUID systems are extremely sensitive instruments designed to detect small electromagnetic signals. By combining SQUID electronics with various special purpose probes and auxiliary electronics, laboratory systems having a variety of capabilities are made available. - See more at: http://www.tristantech.com/#sthash.JlYDZcjM.dpuf
-
Product
Cryogenic Temperature Sensors
Interchangeable Rox™
-
Ruthenium oxide temperature sensors are thick-film resistors, with most models suitable for use in magnetic field applications. These composite sensors consist of bismuth ruthenate, ruthenium oxides, binders, and other compounds that allow them to obtain the necessary temperature and resistance characteristics. Each Lake Shore Rox™ model adheres to a single resistance versus temperature curve.
-
Product
Scanning Probe Microscopes
attoMICROSCOPY
-
The mission to create scientific impact has kept attocube at the frontier of cutting edge research instrumentation. Decades of combined experience in all relevant fields, an excellent team, and close cooperations with some of the world’s leading research institutes have evolved into a broad portfolio of high-end cryogenic scanning probe microscopes.
-
Product
High Precision Measuring Systems
-
Kaman Precision Products, Inc.
Kaman offers thousands of high-precision sensors for different measurement ranges, materials, environments, temperatures, and pressures. Our extensive offerings include handmade custom precision sensors to sensors manufactured in a fully automated environment. Kaman makes sensors capable of operating in temperatures from cryogenic to 1,100° F.
-
Product
Multipurpose Thermometer-Rechargeable
BAT-10R
-
This versatile thermometer has a wide temperature range and can be used in applications as diverse as cryogenic measurements for blood banking and cryosurgery, skin temperature measurements in exercise experiments, liquid measurements in spectrophotometer cuvettes, melting points of plastics and all types of animal and insect temperature measurements.
-
Product
Helium Liquefiers, Purifiers and Recovery Systems
NexGen & ATL Liquefiers and Purifiers
-
Quantum Design's full line of liquefiers and innovative helium recovery, storage and purification systems allow you to recover and liquefy the helium gas currently being lost from the normal boil off and helium transfers of your cryogenic instruments. A perfect helium recycling solution for research and medical cryostats, Quantum Design’s helium liquefiers and recovery systems allow you to break your dependence on cryogen suppliers and no longer be subject to higher costs and undependable supply. You will also be doing your part to conserve a precious natural resource which is vital to scientific research and medical treatment.
-
Product
Temperature Logger for PT1000 Probe
TV-4204
-
PT1000 probes are available with this logger and will record down to -200C making them suitable for cryogenic applications. The probes are of 3-wire construction and available probes are listed in the 'You will also need' section.
-
Product
Recirculating Gas Coolers
-
Cool your continuous flow cryostat without the need for liquid cryogens.
-
Product
Cryogenic Temperature Sensors
-
The sensors incorporate uniform sensing elements that exhibit precise, repeatable, monotonic temperature response over a wide range.
-
Product
Low Level Voltage Measuring Instruments
-
This instrument has a very wide range of source resistance capability and has an equivalent noise resistance of less than 10 ohms. Sub-nanovolt resolution is possible. The N11 has many applications, including cryogenic measurements.
-
Product
Specific Heat Capacity
-
The heat capacity probe uses a miniature AC calorimeter to measure the heat capacity of samples weighing as little as one microgram. The AC technique employed is highly sensitivity and combined with the automated Cryogenic Software, is simple to use.
-
Product
Cryogenic Probe Station
CryoPro
-
Materials Development Corporation
The MDC Model 441 Cryogenic Probe Station is a cost effective alternative to high-priced vacuum based cryogenic probe stations. With up to five probes available and sample diameters up to six inches, the MDC Cryogenic Probe Station allows for electrical measurements at temperatures near liquid nitrogen levels (77K).
-
Product
The CryoLab
-
The CryoLab is designed to perform rapid material or circuit characterization measurements from room temperature down to cryogenics in a fully automated manner. Doing measurements doesn’t require any experience or know-how on cryogenics, vacuum technology or thermodynamics from the user.
-
Product
Controlled Environment Probe Station
CG-196
-
Everbeing controlled environment probe station allows vacuum and cryogenic probing down to 77K with liquid nitrogen or high temperature probing up to 1273K. Efficient in characterizing your devices at extreme temperatures, vacuum, specific gas, etc.
-
Product
Cryogenic Hygrometer
CR - 1A
-
Buck Research Instruments, LLC
The CR-1A is a high performance, cryogenically cooled hygrometer. CR-1 instruments have been routinely used aboard NASA aircraft and elsewhere for years. The CR-1A is a miniaturized version of the original CR-1, and uses a much smaller LN2 dewar. Operating time per filling of LN2 ranges from 6 to 8 hours, depending on the dew points being measured.
-
Product
Vibrating Sample Magnetometer
VSM
-
The Cryogenic Vibrating Sample Magnetometer (VSM) is designed for measurement of the DC magnetic moment of a sample with a noise floor sensitivity of 10-6 and at 10 seconds integration time.
-
Product
TEM Lamella Preparation And Volume Imaging Under Cryogenic Conditions
ZEISS Correlative Cryo Workflow
-
ZEISS Correlative Cryo Workflow connects widefield, laser scanning, and focused ion beam scanning electron microscopy in a seamless and easy-to-use procedure. The solution provides hardware and software optimized for the needs of correlative cryogenic workflows, from localization of fluorescent macromolecules to high-contrast volume imaging and on-grid lamella thinning for cryo electron tomography.
-
Product
External Temperature for 3-wire PT1000 Probe
TGP-4204
-
PT1000 probes are available with this logger that will record down to -200C, making them suitable for cryogenic applications. The probes are of 3-wire construction and use class A elements, making them more accurate than their 2-wire predecessors.
-
Product
Cryostat Calibrators
-
Electronic Development Labs, Inc.
Specialized, low-temperature, passively cooled, or liquid nitrogen-based apparatuses designed to calibrate temperature sensors (RTDs, thermocouples, PRTs) at cryogenic levels.
-
Product
High field Superconducting Magnets
-
Cryogenic Ltd manufactures a wide range of superconducting magnets for research and industrial purposes. A range of standard solenoids between 1 to 22 Tesla is produced, and in addition split pair solenoids in the range 1 to 14 Tesla, with a typical central field homogeneity of 0.1%.
-
Product
Cryogenic Temperature Sensors
Platinum
-
PT-100 platinum resistance thermometers (PRTs) serve an important role in both cryogenic research and industrial cryogenics applications.
-
Product
Hall (Magnetic) Sensors
-
Small, compact axial and transverse Hall generators for measuring flux density. Available for use at cryogenic temperatures.
-
-
Product
16-Channel RTD Signal Conditioning Card
ProDAQ 5821
-
The ProDAQ 5821 series of Signal Conditioning Cards is designed to interface with a variety of sensors, principally RTDs, Thermistors, Cryogenic Diodes and Voltage type sensors. Each version of the 5821 provides the capability of precise 4-wire measurement. In order to achieve this, a precise 500μA constant current source is provided per channel. The current source can be disabled on a per channel basis and is monitored to ensure that current is flowing. The value of the output current is stored on-board after calibration. In order to achieve the highest accuracy the output current may be automatically calibrated 'on-the-fly' using the ProDAQ 3416 24-bit Sigma-Delta ADC card and an on-board precision resistor.
