Analog-to-Digital Converter (A/D) and Counter-Timer Card

AD8-16 (ADA-8) - Acces I/O Products, Inc.

Model AD8-16 (alternate part number ADA-8) is an economical, multiplexed, eight-bit Analog-to-Digital Converter (A/D) and Counter-Timer card for ISA-bus computers. It accepts up to eight differential or 16 single-ended analog inputs (jumper configured). AD8-16 requires a full-size expansion slot. All connections are made through a standard 50-pin connector. Base I/O address selection is via dip switch.
Analog inputs are multiplexed, amplified, held by a sample and hold amplifier, and then digitized by an eight-bit A/D converter. Amplifier gain is selected by software and can differ from channel to channel.

Product Home Contact/Sales Distributors/Reps Company Catalog Share Add To List

Family

Analog Input Products

Acces I/O Products, Inc.

Analog input boards are useful for measuring variably changing conditions in the real world. When we want to measure these variably changing conditions, we need analog inputs to convert these changing real world conditions to changing electrical quantities. For example, monitoring the temperature inside a wood kiln, or the water pressure on the output of a pump, or the heart rate of a medical patient. In each of these cases, you can use one of our analog input devices to convert the electrical data from a sensor or transducer into binary data that can then be used by your computer. The device that converts this data is known as an analog to digital converter (abbreviated ADC, A/D, or A to D). An analog input is a measurable electrical signal with a defined range. The analog input changes continuously in a definable manner in relation to the measured property. This data is very useful for process monitoring, process control, or simple monitoring / data collection and acquisition. ACCES' analog input boards amplify and multiplex input signals from thermocouples, strain gauges, accelerometers, photo sensors, flowmeters, RTDs, thermistors, voltage sources, millivolt sources, and current sources, just to name a few.

Product Home Contact/Sales Distributors/Reps Company Catalog Share Add To List
PCI Express Mini Card With 16 S.E./8 Diff'l Analog Inputs And 4 Analog Outputs

mPCIe-AIO16-16F - Acces I/O Products, Inc.

The mPCIe-AIO16-16F is an ideal solution for adding high-speed analog I/O capabilities to any computer with an mPCIe slot.

Product Home Contact/Sales Distributors/Reps Company Catalog Share Add To List
Sixteen Channel, 12-Bit Analog Input Card

PCI-AI12-16(A) - Acces I/O Products, Inc.

Model PCI-AI12-16 is a multifunction, high-speed, analog-to-digital converter board for use in PCI-Bus computers. It accepts up to 16 single-ended or eight differential inputs. The board uses a low-noise, multilayer printed circuit board. Inputs are protected against overvoltage conditions up to ±35 volts and typically survive static discharges beyond 4000 volts.

Product Home Contact/Sales Distributors/Reps Manual Company Catalog Share Add To List
8-Input A/D Converter and Counter/Timer Card

AIO8 - Acces I/O Products, Inc.

AIO8 is an economical multifunction, moderate-speed, multiplexed analog-to-digital converter card with digital I/O and with counter/timers. It can be used with ISA-bus computers. The card is 7" long and requires one slot in the computer. All external connections are made through a standard 37-pin D-type connector at the rear of the computer.

Product Home Contact/Sales Distributors/Reps Company Catalog Share Add To List
Analog Multiplexer Board

104-AIM-32 - Acces I/O Products, Inc.

The 104-AIM-32 is an analog signal multiplexer conforming to the PC/104 standard. The card will multiplex and condition 16 differential or 32 single-ended analog signals before passing them to an analog-to-digital converter card like the 104-AIO12-8. A system may comprise one to seven of these cards in tandem with one 104-AIO12-8 A/D converter board. The 104-AIM-32 card may be used as part of a large data acquisition system. The 104-AIM-32A Kit consists of one 104-AIM-32 and one 12-bit 8-input A/D board.

Product Home Contact/Sales Distributors/Reps Company Catalog Share Add To List
Intelligent A/D I/O Unit

RAD242 - Acces I/O Products, Inc.

Model RAD242 is an intelligent, two-differential-channel, 24-bit analog-input interface unit that includes a Delta-Sigma A/D converter. The converter has a digital output filter with adjustable notch frequency from 10 Hz to 2000 Hz. The pod also has 13 bits of digital input/output. A precision 10 VDC voltage that can be used for transducer excitation is available at connector pin 5. As much as 60 mA current can be provided. It is packaged in a NEMA 4 enclosure for remote installation in harsh environments. RAD242 also provides a user-definable interrupt input and counter/timer input. An optional RAD Firmware Development Kit is available if you wish to use those user-programmable input lines or to develop a custom program.

Product Home Contact/Sales Distributors/Reps Company Catalog Share Add To List

Analog-to-Digital Converter (A/D) and Counter-Timer Card

Topics

Analog Input Products

PCI Express Mini Card With 16 S.E./8 Diff'l Analog Inputs And 4 Analog Outputs

Sixteen Channel, 12-Bit Analog Input Card

8-Input A/D Converter and Counter/Timer Card

Analog Multiplexer Board

Intelligent A/D I/O Unit