PXI Differential Fault Insertion Switch Modules

Pickering's PXI Differential Fault Insertion Switch Modules support multiple channels of two-wire serial interfaces. Each channel can simulate an open fault in either or both wires, a short between both wires or a short to externally applied fault conditions. *Two module types are available: Two wire fault insertion module suitable for CAN Bus and FlexRay.*High bandwidth two wire fault insertion module suitable for Gigabit Ethernet, AFDX and BroadR-Reach.

Product Home Contact/Sales Distributors/Reps Company Catalog Share Add To List

Topics

Family

CAN/FlexRay/Differential Bus PXI Fault Insertion Switch - 4 Channel

40-200-004 - Pickering Interfaces Ltd.

Each channel can support up to 0.3A and is rated to handle up to 100V between the wire pairs. The wire pairs have controlled transmission line impedance suited to most differential pair signaling systems, including fast CAN Bus interfaces and RS232. Each fault bus is capable of carrying 2A allowing multiple channels to be connected to the same fault condition. Additionally, each fault bus features a changeover relay to allow the user to connect alternative fault conditions to the fault buses.

Product Home Contact/Sales Distributors/Reps Datasheet Company Catalog Share Add To List
PXI/PXIe 1000Base-T1 Dual Multiplexer With Fault Insertion, Single Channel

40-204-001 - Pickering Interfaces Ltd.

The 40-204-001(PXI) and 42-204-001 (PXIe) are single channel differential multiplexers designed to simulate common faults on high-speed two wire communication interfaces such as 1000Base-T1. They are available with support for 1 or 2-channels of two wire serial interfaces. Each channel pair can be looped out to external equipment or the switches can be used simulate a channel open fault. Using the fault bus, switches can simulate a short between both wires or a short to one of two externally applied fault conditions – such as battery supply or ground - via two fault buses.

Product Home Contact/Sales Distributors/Reps Datasheet Company Catalog Share Add To List
PXI/PXIe 1000Base-T1 Dual Multiplexer With Fault Insertion, Single Channel

42-204-001 - Pickering Interfaces Ltd.

The 40-204-001(PXI) and 42-204-001 (PXIe) are single channel differential multiplexers designed to simulate common faults on high-speed two wire communication interfaces such as 1000Base-T1. They are available with support for 1 or 2-channels of two wire serial interfaces. Each channel pair can be looped out to external equipment or the switches can be used simulate a channel open fault.

Product Home Contact/Sales Distributors/Reps Datasheet Company Catalog Share Add To List
Ethernet/AFDX/BroadR-Reach PXI Fault Insertion Switch - 4 Channel

40-201-004 - Pickering Interfaces Ltd.

This high bandwidth differential fault insertion module is designed to simulate common faults on high speed two wire communication interfaces such as Ethernet. This module supports 4 or 8-channels of two wire serial connections and can be used for simulating faults on Ethernet, AFDX, BroadR-Reach, 100BaseT and 1000BaseT interfaces. Any wire can be set to an open circuit, shorts can be applied across the wire pair, or to the adjacent pair. Fault connections can be made to one of four external signals via two fault buses, typically simulating connections to a supply voltage or ground. Each fault bus is capable of carrying 2A allowing multiple channels to be connected to the same fault condition. Additionally, each fault bus features a changeover relay to allow the user to connect alternative fault conditions to the fault buses.

Product Home Contact/Sales Distributors/Reps Datasheet Company Catalog Share Add To List
CAN/FlexRay/Differential Bus PXI Fault Insertion Switch - 8 Channel

40-200-008 - Pickering Interfaces Ltd.

This PXI Fault Insertion module is designed to simulate common faults on two wire communication interfaces such as CAN Bus. This module supports 4 or 8-channels of two wire serial interfaces. Each channel can simulate an open fault in either or both wires, a short between both wires or a short to one of eight externally applied fault connections, such as a battery connection or ground, via four fault buses. Each channel can support up to 0.3A and is rated to handle up to 100V between the wire pairs. The wire pairs have controlled transmission line impedance suited to most differential pair signalling systems, including fast CAN Bus interfaces and RS232. Each fault bus is capable of carrying 2A allowing multiple channels to be connected to the same fault condition. Additionally, each fault bus features a changeover relay to allow the user to connect alternative fault conditions to the fault buses.

Product Home Contact/Sales Distributors/Reps Datasheet Company Catalog Share Add To List
Ethernet/AFDX/BroadR-Reach PXI Fault Insertion Switch - 8 Channel

40-201-008 - Pickering Interfaces Ltd.

This high bandwidth differential PXI fault insertion module is designed to simulate common faults on high speed two wire communication interfaces such as Ethernet. This module supports 4 or 8-channels of two wire serial connections and can be used for simulating faults on Ethernet, AFDX, BroadR-Reach, 100BaseT and 1000BaseT interfaces. Any wire can be set to an open circuit, shorts can be applied across the wire pair, or to the adjacent pair. Fault connections can be made to one of four external signals via two fault buses, typically simulating connections to a supply voltage or ground. Each fault bus is capable of carrying 2A allowing multiple channels to be connected to the same fault condition. Additionally, each fault bus features a changeover relay to allow the user to connect alternative fault conditions to the fault buses.

Product Home Contact/Sales Distributors/Reps Datasheet Datasheet Company Catalog Share Add To List
PXI/PXIe 1000Base-T1 Dual Multiplexer With Fault Insertion, Dual Channel

40-204-002 - Pickering Interfaces Ltd.

The 40-204-002 (PXI) and 42-204-002 (PXIe) are dual channel differential multiplexers designed to simulate common faults on high-speed two wire communication interfaces such as 1000Base-T1. They are available with support for 1 or 2-channels of two wire serial interfaces. Each channel pair can be looped out to external equipment or the switches can be used simulate a channel open fault. Using the fault bus, switches can simulate a short between both wires or a short to one of two externally applied fault conditions – such as battery supply or ground - via two fault buses.

Product Home Contact/Sales Distributors/Reps Datasheet Company Catalog Share Add To List
PXI/PXIe 1000Base-T1 Dual Multiplexer With Fault Insertion, Dual Channel

42-204-002 - Pickering Interfaces Ltd.

The 40-204-002 (PXI) and 42-204-002 (PXIe) are dual channel differential multiplexers designed to simulate common faults on high-speed two wire communication interfaces such as 1000Base-T1. They are available with support for 1 or 2-channels of two wire serial interfaces. Each channel pair can be looped out to external equipment or the switches can be used simulate a channel open fault.

Product Home Contact/Sales Distributors/Reps Datasheet Company Catalog Share Add To List
PXI/PXIe 1000Base-T1 Fault Insertion Switch, 3-Channel

42-203-001 - Pickering Interfaces Ltd.

The 40-203-001 (PXI) and 42-203-001 (PXIe) are designed to simulate common faults on high-speed two wire communication interfaces such as 1000Base-T1. They support 3 channels of two wire serial interfaces. Each channel pair can simulate an open fault in either or both wires, and using the fault bus switches can simulate short between both wires or a short to one of two externally applied fault connections – such as battery supply or ground - via two fault buses.

Product Home Contact/Sales Distributors/Reps Datasheet Company Catalog Share Add To List
PXI/PXIe 1000Base-T1 Fault Insertion Switch, 3-Channel

40-203-001 - Pickering Interfaces Ltd.

The 40-203-001 (PXI) and 42-203-001 (PXIe) are designed to simulate common faults on high-speed two wire communication interfaces such as 1000Base-T1. They support 3 channels of two wire serial interfaces. Each channel pair can simulate an open fault in either or both wires, and using the fault bus switches can simulate short between both wires or a short to one of two externally applied fault connections – such as battery supply or ground - via two fault buses.

Product Home Contact/Sales Distributors/Reps Datasheet Company Catalog Share Add To List