Showing results: 1 - 15 of 35 items found.
-
PCCextend 125CIB -
Sycard Technology
For those applications that require access to the CardBus PC Card that can't use a standard extender card, Sycard provides the PCCextend 125CIB (Card Interface Board) which allows full access to all 68-signal and power pins on the CardBus peripheral. Standard 0.1" headers allow the user to connect standard 34-pin ribbon cable to test or prototype hardware.
-
PCCextend 140 -
Sycard Technology
The PCCextend 140 was designed from the ground up to support the higher data rates and controlled impedance requirements of the CardBus interface. Fabricated on a six-layer board, the PCCextend 140 is designed to minimize signal degradation in the 33MHz CardBus environment. The PCCextend 140 is compatible with all release 2.1 and both 16-bit PC Card and CardBus-capable PC Card 95 sockets.
-
PCCextend 125 -
Sycard Technology
The PCCextend 125 is a flexible extender card designed to provide easy access to a CardBus PC Card for debug or test. Designed with the same low noise characteristics of our PCCextend 140, the PCCextend 125 takes this design a step further by connecting the host and card via ribbon cables. The flexible extender consists of two PC boards—the host interface board and the card interface board. The host interface board is inserted into the host's CardBus slot.
-
PCCextend 125 HIB -
Sycard Technology
For those applications that require access to the CardBus PC Card interface that can't use a standard extender card, Sycard provides the PCCextend 125 HIB (Host Interface Board) which allows full access to all 68-signal and power pins on the PC Card host. Standard 0.1" headers allow the user to connect standard 34- pin ribbon cable to test or prototype hardware.
-
PCCextend 70 & 75 -
Sycard Technology
The PCCextend 70 socket saver/extender is optimized for the full 33MHz speed of the CardBus interface. Its six-layer controlled impedance construction provides excellent signal integrity. The PCCextend 75 socket saver/extender is similar to the PCCextend 70, but has it's connector mounted on the bottom. When used in conjunction with the PCCextend 70, it allows both slots of a notebook computer to be extended at the same time.
-
PCCtest 560 -
Sycard Technology
The PCCtest 560 extends the functionality of the PCCtest 460 by adding a serial debug port. The serial debug port allows the user to monitor the CardBus or 16-bit interface. In CardBus mode, the PCCtest 560 is capable of initiating I/O and memory transactions. It can also monitor the CardBus interface for any type of cycle.
-
CF extend 180CIB -
Sycard Technology
For those applications that require access to a CompactFlash™ card that can't use a standard extender card, Sycard provides the CF extend 180CIB (Card Interface Board) which allows full access to all 50-signal and power pins on the CompactFlash™ peripheral. Standard 0.1" headers allow the user to connect standard 26-pin ribbon cables to test or prototype hardware.
-
CF extend 160B -
Sycard Technology
The CF extend model 160B is the ultimate CompactFlash™ extender card. It provides CompactFlash™ host and card developers a convenient way of accessing signals on the interface.
-
CF extend 180 -
Sycard Technology
The CF extend 180 is a flexible extender card designed to provide easy access to a CompactFlash™ card for debug or test. Designed with the same low noise characteristics of our CF extend 160, the CF Extend 180 takes this design a step further by connecting the host and card via ribbon cables. The flexible extender consists of two PC boards, the host interface board and the card interface board.
-
CF extend 180HIB -
Sycard Technology
For those applications that require access to the CompactFlash™ interface that can't use a standard extender card, Sycard provides the CF extend 180 HIB (Host Interface Board). The CF extend 180HIB allows full access to all 50-signal and power pins on the CompactFlash™ host. Standard 0.1" headers allow the user to connect standard 26-pin ribbon cables to test or prototype hardware.
-
CF extend 165 -
Sycard Technology
The CF extend 165 is a unique development tool for CompactFlash™ designs. It allows a standard 68-pin PC Card to be inserted into a 50-pin CompactFlash™ socket. Developers of CompactFlash™ products can now use a standard PC Card form factor as a starting point for new designs. While the 50-pin CompactFlash™ interfaces eliminates address lines A11-A25 and the Vpp programming pins, many current PC Cards may work under those conditions.
-
CF extend 166 -
Sycard Technology
CompactFlash™-to-PC Card adapter is designed to allow a 68-pin PC Card to be plugged into a CompactFlash™ socket. The card is constructed with a flexible circuit to allow a the PC Card to be mounted in a number of orientations. The CFextend 166 can be used for a wide variety of applications.
-
PCCextend 135 -
Sycard Technology
The PCCextend 135 allows a CardBus card under test to be powered from an external power supply. MOSFET switches automatically switch the external power to the CardBus card under test when the socket power is applied. The PCCextend 135 provides separate switches for VCC, VPP1 and VPP2. Fabricated on a six-layer board, the PCCextend 135 is designed to minimize signal degradation in the 33MHz CardBus environment.
-
PCCtest 172 -
Sycard Technology
The PCCtest 172 is part of a new family of low cost 16-bit PC Card socket testers. Based on the highly successful PCCtest 2xx series of socket testers, the PCCtest 172 is a cost reduced version designed to provide similar test coverage at a significant price reduction.
-
PCCtest 170 -
Sycard Technology
The PCCtest 170 is part of a new family of low cost 16-bit PC Card socket testers. Based on the highly successful PCCtest 2xx series of socket testers, the PCCtest 170 is a cost reduced version designed to provide similar test coverage at a significant price reduction.
