Showing results: 1 - 15 of 23 items found.
-
AF-uOR-102 -
Advanced Fiber Solutions
Optical Fiber Type MultimodeWavelength, nm 850nm / 1300nm +/- 20nmDynamic range 20 / 19 dBAttenuation Dead Zone 6 MetersEvent Dead Zone 1 MeterPulse Width 10...1000 nSLoss Resolution 0.001 dBDistance Range 2.5, 5, 10, 20, 40, 80, 120, 160, 240 kmDistance accuracy ±(0.5 + 5´ 10 - 5´ L + (dn/n)´ L)Refractive Index Range Setting 1.0000...2.0000Optical Connector Type SC, ST, FC (other connectors available if requested)Supply Current From USB Port < 200mASize 6.25 Inches x 3 Inches x 1.25 InchesWeight 1.5 lbsLanguage English and Spanish
-
AF-DI-1000 -
Advanced Fiber Solutions
Our latest introduction to the DR500 series line is the ferrule end fiber scope which enables the technician to view the end surface of the ferrule with an enhanced image of the fiber core and cladding. With AF-DI-1000* scope attached to the DR500 series OTDR via the side USB port the technician is able to determine the quality of the surface of the ferrule. The fiber scope enables the technician to see scratches, scrapes, dirt or any residual that might be on the ferrules surface area. If desired the fiber end image can be saved and downloaded to the PC for further analysis.
-
OM120A -
Advanced Fiber Solutions
The OM120 is a general-purpose power meter suitable for a both premise and outside plant applications. These units are ideal for measurement of optical power and optical loss/attenuations in a fiber optic network.
-
OM220A -
Advanced Fiber Solutions
The OM220 is a general-purpose power meter suitable for a both premise and outside plant applications. These units are ideal for measurement of optical power and optical loss/attenuations in a fiber optic network. When paired with an OS400 series source the OM200 series meters are ideal for single-mode (OS430 laser source) or multimode (OS420 LED source) applications.
-
OS430 -
Advanced Fiber Solutions
The OS430 Laser source is for single-mode fibers in the outside plant environment where the long wavelengths are used. The Single output allows the user to test at both 1310nm and 1550nm without disconnecting and reconnecting the cable.
-
OS405 -
Advanced Fiber Solutions
The OS405 (635nm) visible laser cable fault locator allows the operator to find faults in fiber optic cables, even in the OTDR dead zone, optimizing splices and tracing fibers. By injecting a bright red visible light in the fiber, locations of losses such as breaks, bends, or bad connectors can be detected visually, even through the typical yellow or orange jacket used on most single fiber cables.
-
OS417 -
Advanced Fiber Solutions
The OS417 is optimized for POF (Plastic Optical Fiber) and larger core multimode applications. The OS417 has two fixed ST active device mount LEDs with transmitting wavelengths of 665nm and 850nm.
-
AF-uOR-203 -
Advanced Fiber Solutions
The 200 Series line of OTDR's are designed for Single Mode Applications. We are pleased to announce the introduction of a new FTTH version to our 200 series line. The AF-uOR-210 1310/1550/1625nm unit is the latest addition to this ever expanding line.
-
AF-uOR-204 -
Advanced Fiber Solutions
The 200 Series line of OTDR's are designed for Single Mode Applications. We are pleased to announce the introduction of a new FTTH version to our 200 series line. The AF-uOR-210 1310/1550/1625nm unit is the latest addition to this ever expanding line.
-
AF-uOR-200F -
Advanced Fiber Solutions
The 200 Series line of OTDR's are designed for Single Mode Applications. We are pleased to announce the introduction of a new FTTH version to our 200 series line. The AF-uOR-210 1310/1550/1625nm unit is the latest addition to this ever expanding line.
-
AF-uOR-200T -
Advanced Fiber Solutions
The 200 Series line of OTDR's are designed for Single Mode Applications. We are pleased to announce the introduction of a new FTTH version to our 200 series line. The AF-uOR-210 1310/1550/1625nm unit is the latest addition to this ever expanding line.
-
AF-uOR-201 -
Advanced Fiber Solutions
The 200 Series line of OTDR's are designed for Single Mode Applications. We are pleased to announce the introduction of a new FTTH version to our 200 series line. The AF-uOR-210 1310/1550/1625nm unit is the latest addition to this ever expanding line.
-
AF-uOR-101 -
Advanced Fiber Solutions
The 100 Series line of OTDR's are designed for Multimode Applications. We are pleased to announce two new high resolution additions to the 100 series line, the AF-uOR-102 and the AF-uOR-100A.
-
AF-uOR-200A -
Advanced Fiber Solutions
The 200 Series line of OTDR's are designed for Single Mode Applications. We are pleased to announce the introduction of a new FTTH version to our 200 series line. The AF-uOR-210 1310/1550/1625nm unit is the latest addition to this ever expanding line.
-
AF-uOR-100A -
Advanced Fiber Solutions
Optical Fiber Type MultimodeWavelength, nm 850nm +/- 20nmDynamic range 22 dBAttenuation Dead Zone 6 MetersEvent Dead Zone 1 MeterPulse Width 10...1000 nSLoss Resolution 0.001 dBDistance Range 2.5, 5, 10, 20, 40, 80, 120, 160, 240 kmDistance accuracy ±(0.5 + 5´ 10 - 5´ L + (dn/n)´ L)Refractive Index Range Setting 1.0000...2.0000Optical Connector Type SC, ST, FC (other connectors available if requested)Supply Current From USB Port < 200mASize 6.25 Inches x 3 Inches x 1.25 InchesWeight 1.5 lbsLanguage English and Spanish