Search Results for Winding Test

  • AWRMS 50 - Automatic Winding Resistance Test Set 50A (resistance only) Computer Controlled Test System for Power Transformers Winding Resistance, Heat Run Tests Highest Accuracy (0.05%) in the Industry 48 Channel Scanner Matrix Heavy Duty Discharge Circuit Calibration Standards
    Measurements International
  • AWRMS 200 - Automatic Winding Resistance Test Set 200A (resistance only) Computer Controlled Test System for Power Transformers Winding Resistance, Heat Run Tests Highest Accuracy (0.05%) in the Industry 48 Channel Scanner Matrix Heavy Duty Discharge Circuit Calibration Standards
    Measurements International
  • AWRMS 250 - Automatic Winding Resistance Test Set 250A (resistance only) Computer Controlled Test System for Power Transformers Winding Resistance, Heat Run Tests Highest Accuracy (0.05%) in the Industry 48 Channel Scanner Matrix Heavy Duty Discharge Circuit Calibration Standards
    Measurements International
  • AWRMS 100 - Automatic Winding Resistance Test Set 100A (resistance only) Computer Controlled Test System for Power Transformers Winding Resistance, Heat Run Tests Highest Accuracy (0.05%) in the Industry 48 Channel Scanner Matrix Heavy Duty Discharge Circuit Calibration Standards
    Measurements International
  • Function Test System for winding goods DTS-FT Test system for special winding goods, e.g. input filter, high voltage choke, welding transformers, etc.
    Deutronic Elektronik
  • DAC-PG-3F - Impulse Test Equipment for Rotator windings DAC-PG-3F is impulse test equipment for testing of low-voltage rotator windings. The equipment is composed of a surge impulse generator circuit, phase selector unit (selection between U, V and W), and waveform recorder circuit to provide a differential method type of impulse testing instrument.
    Soken Electric Co
  • RMO20TW - Winding Ohmmeter The Winding Ohmmeter RMO20TW is designed for the resistance measurement of inductive test objects and for on-load tap changer verification. The RMO20TW generates a true DC ripple-free current. The injection of current and discharge of energy from the inductance are both automatically regulated. The two independent channels enable testing of two windings in series. The RMO20TW has a very high ability to cancel electrostatic and electromagnetic interferences that exist in the HV electric fields. An automatic connections check is performed at the beginning of each test, and the instrument warns the user if an open connection is detected.
    IBEKO Power AB
  • RMO10TW - Winding Ohmmeter The Winding Ohmmeter RMO10TW is designed for the resistance measurement of inductive test objects and for on-load tap changer verification. The RMO10TW generates a true DC ripple-free current. The injection of current and discharge of energy from the inductance are both automatically regulated. The two independent channels enable testing of two windings in series. The RMO10TW has a very high ability to cancel electrostatic and electromagnetic interferences that exist in the HV electric fields. An automatic connections check is performed at the beginning of each test, and the instrument warns the user if an open connection is detected.
    IBEKO Power AB
  • RMO30TW - Winding Ohmmeter The Winding Ohmmeter RMO30TW is designed for the resistance measurement of inductive test objects and for on-load tap changer verification. The RMO30TW generates a true DC ripple-free current. The injection of current and discharge of energy from the inductance are both automatically regulated. The two independent channels enable testing of two windings in series. The RMO30TW has a very high ability to cancel electrostatic and electromagnetic interferences that exist in the HV electric fields. An automatic connections check is performed at the beginning of each test, and the instrument warns the user if an open connection is detected.
    IBEKO Power AB
  • RMO50TW - Winding Ohmmeter The Winding Ohmmeter RMO50TW is designed for the resistance measurement of inductive test objects and for on-load tap changer verification. The RMO50TW generates a true DC ripple-free current. The injection of current and discharge of energy from the inductance are both automatically regulated. The two independent channels enable testing of two windings in series. The RMO50TW has a very high ability to cancel electrostatic and electromagnetic interferences that exist in the HV electric fields. An automatic connections check is performed at the beginning of each test, and the instrument warns the user if an open connection is detected.
    IBEKO Power AB
  • TRANSFORMER WINDING RESISTANCE METER This Test set is suitable to measure winding resistance of transformers, single or 3-phase, star or delta connected upto several MVA.Two independent displays read the resistance of both primary & secondary windings simultaneously. However, primary or secondary winding can also be measured separately.
    International Biological
  • 5000 - Impulse Winding Tester IEM is an engineering oriented company located in Palatine, Illinois. We have been producing bench top test equipment for the coil winding industry since 1976. Our staff includes engineers with backgrounds in magnetic field modeling and process control engineering.
    International Electro-Magnetics
  • TRM 103 - Winding Resistance Meter Designed to measure DC winding resistance of highly inductive test objects - Transformers, Generators, Motors etc. for field testing as well as for factory testing Designed to work reliably under live EHV switchyard conditions ensuring operators safety and repeatability of results Winding Resistance Meter designed for large transformers up to 315MVA Quick stabilization of reading even on large test objects by deploying high open circuit voltage Quick & simple tool to check the condition of OLTC-discontinuity during tap change, if any Direct display of Resistance values Available for continuous testing - powerful, truly continuous DC source with excellent heat management through forced cooling
    Scope T&M Pvt Ltd
  • IWT-5000A - Impulse Winding Tester IWT-5000A(Impulse Winding Tester) is the advanced design of the test instrument for the insulation performance of the coil. It is used to test the coil wire material, magnetic material, framework and process craft whose can influence debasement of the insulation performance of the coil layer, circle and down-lead.
    Leap Electronic Co
  • 2950 - Hot Winding Ohm meter The Hot Winding Ohmmeter measures AC winding temperatures during AC operation. It can be used for AC motors, transformers and other AC coils. This instrument uses the resistance method, measuring during operation. This equipment gives data logging of the test results. It is available with 1 to 3 measurement channels.
    Friborg Test Technology
  • TRM 13 - Winding Resistance Meter Designed to measure DC winding resistance of highly inductive test objects - Transformers, Generators, Motors etc. for field testing as well as for factory testing Designed to work reliably under live EHV switchyard conditions ensuring operator?s safety and repeatability of results Winding Resistance Meter designed for large transformers up to 1MVA Quick stabilization of reading even on large test objects by deploying high open circuit voltage Quick & simple tool to check the condition of OLTC - discontinuity during tap change, if any Direct display of Resistance values Available for continuous testing - powerful, truly continuous DC source with excellent heat management through forced cooling Total instrument and human safety ensured through automatic & quick back-emf discharge after test completion Discharge possible through either voltage or current lead in case of accidental lead disconnection - operator risk is minimized
    Scope T&M Pvt Ltd
  • TRM 14 - Winding Resistance Meter Designed to measure DC winding resistance of highly inductive test objects - Transformers, Generators, Motors etc. for field testing as well as for factory testing Designed to work reliably under live EHV switchyard conditions ensuring operator's safety and repeatability of results Winding Resistance Meter designed for large transformers up to 1MVA Quick stabilization of reading even on large test objects by deploying high open circuit voltage Quick & simple tool to check the condition of OLTC-discontinuity during tap change, if any Direct display of Resistance values Available for continuous testing - powerful, truly continuous DC source with excellent heat management through forced cooling Total instrument and human safety ensured through automatic & quick back-emf discharge after test completion Discharge possible through either voltage or current lead in case of accidental lead disconnection -operator risk is minimized
    Scope T&M Pvt Ltd
  • TRM 104 Type I - Winding Resistance Meter Designed to measure DC winding resistance of highly inductive test objects - Transformers, Generators, Motors etc. for field testing as well as for factory testing Designed to work reliably under live EHV switchyard conditions ensuring operator's safety and repeatability of results Winding Resistance Meter designed for large transformers up to 315MVA Quick stabilization of reading even on large test objects by deploying high open circuit voltage Quick & simple tool to check the condition of OLTC - discontinuity during tap change, if any Direct display of Resistance values Available for continuous testing - powerful, truly continuous DC source with excellent heat management through forced cooling Total instrument and human safety ensured through automatic & quick back-emf discharge after test completion Discharge possible through either voltage or current lead in case of accidental lead disconnection - operator risk is minimized
    Scope T&M Pvt Ltd
  • TRM 25 - Winding Resistance Meter Designed to measure DC winding resistance of highly inductive test objects - Transformers, Generators, Motors etc. for field testing as well as for factory testing Designed to work reliably under live EHV switchyard conditions ensuring operator's safety and repeatability of results Winding Resistance Meter designed for large transformers up to 500MVA Quick stabilization of reading even on large test objects by deploying high open circuit voltage Quick & simple tool to check the condition of OLTC - discontinuity during tap change, if any Direct display of Resistance values Available for continuous testing - powerful, truly continuous DC source with excellent heat management through forced cooling Total instrument and human safety ensured through automatic & quick back-emf discharge after test completion Discharge possible through either voltage or current lead in case of accidental lead disconnection - operator risk is minimized
    Scope T&M Pvt Ltd
  • Winding resistance Meter Dual channel Current upto 10A Accuracy of 0.2% Can work in charged switchyard Built-in normal paper printer for printout of test values Light weight (<7kg) and very portable
    Intrax Systems Pvt
  • CS9918N Series - Impulse Winding Tester 320*240 graphic LCD ¬∑Store standard waveforms inside the tester and compare the waveform of DUT with it automatically ¬∑Continuous programmable test through channel A,B and C ¬∑Comparison of waveform Area, Area tolerance, Frequency, or corona value between sampling waveform and standard waveform
    AllWin Instrument
  • WRM-10P - Winding Resistance Ohmmeter The WRM-10P is a low resistance ohmmeter with all of the features of the WRM-10 above. In addition to the features of the WRM-10, the WRM-10P includes a built-in 2.5" wide thermal printer that allows test records to be printed in the field. Test records can also be downloaded to a PC.
    Vanguard Instruments
  • Surge Comparison Winding Tester Vivid metrawatt provides sophisticated pc based winding testers for surge comparison. These type of instrument are mainly suitable for heavy electrical machines like alternators, motors and transformers in power generation and railway traction applications. They are useful for complete insulation and inter turn test, and have several advantages over cro based testers.
    Vivid Metrawatt
  • DWX-01A, 05A, 10 - Impulse Winding Tester With the advanced requirement of miniaturization and high frequency technology of coil production, the DWX tester is designed to test other coils and low inductance coils used in high-end electronic components. Through the use of impulse power source with high-speed switch, highly efficient input circuit, and high-speed A / D sampling circuit, the DWX tester can offer a new solution to the low inductance coil tests.
    ECG Kokusai Co. Ltd

Results 1 - 24 of 134