|Sponsor Your Catalog|
HS101T - Video Test Monitor HandySet Technical combines a portable colour test monitor with an on screen display of the Sync Pulse, Chroma Burst and Video levels as well as the internal battery voltage.
VGA-SE10 - XGA 1024x768 Computer Monitor / Video Projector Tester This is the brand new, pocket sized, VGA-SE10 computer monitor tester designed for on-site testing and aligning of computer monitors and video projectors without the need of a computer. The VGA-SE10 provides 16 switch selectable display patterns at the 1024 x 768 video resolution commonly used with XGA projection systems. The VGA-SE10 will test for Bad Pixels, Color Wheel Operation, Blank Raster, Convergence, Linearity, Color Balance, Screen Alignment and Interconnecting Cable Quality.
PHABRIX SxD - Portable Video Test Signal Generator, Monitor & Audio/Video/Data Analyzer Dual Link 3G-SDI, HD-SDI and SD-SDI Portable Video Test Signal Generator, Monitor & Audio/Video/Data Analyzer
M-SDT-SD2 - 7 inch HD-SDI Tester 800 X 600 display screen
SDI high definition image video in & video out
Resolution: 1920 X 1080, 1080 X 720
IP camera´s Ping & IP address test
Analog camera´s video level test
PTZ controller & RS485 data analysis
Multimeter, Fiber optic power meter
PoE power supply test, Visual fault locator
Ethernet port flicker & link monitor
Snapshot, video record & playback
Micro SD card storage, built in 4G SD card
TDR break-point and short circuit testing
Video level meter
M-CST-SKN - IP CCTV Test Monotor CCTV Test Monitor with PoE, ip camera´ping testing, ip address searching, wire tracer, fiber optic power meter, TDR disconnection testing and short circuit testing. 3.5 inch HVGA LCD Screen, 480 x 320 resolution. Video brightness/contrast/color saturation could be adjusted. Backlight level could be also adjusted. Video images could be zoomed in 1-10 times. Support video Snapshot and screenshot. Video recording and playback. Support Micro SD card for recording. Built in 4G Micro SD card. NTSC/PAL automatic recognition and display. Video signal measurement. Upgraded NTSC/PAL video image generator.
DisplayMate - Test & Calibration Software DisplayMate is an award winning Windows PC based software utility for setting up, tuning, calibrating, evaluating, and testing any CRT, LCD, DLP or Plasma monitor, projector or HDTV set to produce the highest image and picture quality possible. It's also great for calibrating your color printer to match your display. DisplayMate is easy to use, assumes no prior video knowledge, and is designed for both video novices and experts alike.
EMF1390 - EMF Tester Quickly & reliably measures electromagnetic field radiation levels around power lines, home appliances, computer monitors, video machinery and industrial devices. Easy to use. Compact & lightweight
BR50 - Video Borescope/Camera Tester 17mm camera diameter and 2.4" Color TFT LCD Monitor. 17mm diameter camera head with 39" (1m) flexible gooseneck cable retains configured shape. Four LED lamps with five brightness levels illuminate the viewed object. Glare-free close-up field of view with 480 x 234 pixel display. Automatically detects NTSC and PAL cameras. Complete with rechargeable Lithium battery, and Universal AC adapter/charger with USB cable.
2.5 Inch CCTV Test Monitor 2.5 Inch TFT LCD Monitor Tester, Video System input:PAL/NTSC. Specially used in CCTV testing and monitoring. No radiation . Size: 85x64x209mm
VGA-Plus - Computer Monitor Tester The VGA-Plus is a compact and most versatile computer monitor tester. With 16 switch selectable functions, you can diagnose, repair and test all VGA type monitors, projectors, LCD displays and video capture equipment without the need of a computer. The VGA-Plus provides sequencing functions which allow extended burn-in testing for Fixed Scan, Multi Scan or Multi Scan with Power Cycling (Energy Star / Nutek compliant monitors).
AG-T106 - CCTV Tester 3.5 inch LCD color monitor ● OSD menu operation ● Video signal testing ● Audio signal testing ● PTZ controlling ● UTP cable testing
SC-TM05 - 2.7 Inch CCTV Tester .8" TFT-LCD Monitor 960(H)×240(V)Resolution Video Signal Intensity Testing 1Ch BNC Input & 1Ch BNC Output,1CH Audio Input RS232,RS422 simplex and RS485. UTP Cable Test Video Displaying,Video Generating Supports More Than Twenty PTZ Protocols
SC-TM06B - 3.5 Inch CCTV Tester Pro 3.5" TFT-LCD Monitor 960(H)×240(V)Resolution Video Signal Intensity Testing Optical Power Meter DC12V,1A Power Output For Camera 1Ch BNC Input & 1Ch BNC Output,1CH Audio Input RS232,RS422 simplex and RS485. UTP Cable Test Video Displaying,Video Generating
SC-TM05A - 2.7 Inch CCTV Tester 2.8" TFT-LCD Monitor 960(H)×240(V)Resolution Video Signal Intensity Testing DC12V,1A Power Output For Camera 1Ch BNC Input & 1Ch BNC Output,1CH Audio Input RS232,RS422 simplex and RS485. UTP Cable Test Video Displaying,Video Generating Supports More Than Twenty PTZ Protocols
AG-T104 - CCTV Tester 2.8 inch LCD color monitor 2.8 inch LCD color monitor ● OSD menu operation ● Video signal testing ● Audio signal testing ● PTZ controlling ● UTP cable testing ● Video signal generating ● RS485 data testing
TESTER-CCTV-P - Professional CCTV Tester and Multimeter The TESTER-CCTV-P Professional CCTV Tester and Multimeter is a portable, multi-function tester for CCTV installations and maintenance. With the ability to display video on a 3.5" TFT-LCD 960x240 screen and supply 12V DC power, cameras can be set up without the hassle of running between a camera and a DVR located in a separate area. The unit offers a wide selection of test options, including digital multimeter, audio, video, and LAN (local area network) cable connections. It also provides PTZ (Pan-Tilt-Zoom) control and supports more than twenty PTZ protocols, such as PELCO-D/P, Panasonic, and Samsung.
The TESTER-CCTV-P automatically adapts to the video input signal needed when used as a monitor. It can generate the PAL/NTSC multi-system color bar for video testing and calibration. The digital multimeter provides voltage, current, resistance, capacitance, continuity, and diode testing, expanding its use beyond CCTV configurations. The unit supports RS232, RS485 and RS422 interfaces, and baud rates ranging from 150 to 19200 bps. Capable of capturing and displaying RS485 control data, the unit enables effective troubleshooting.
AG-T103 - CCTV Tester 2.5 inch LCD color monitor
OSD menu operation
Video signal testing
UTP cable testing
Video signal generating
RS485 data testing
Shortcut keypad for easier operation
AG-T108 - 3CCTV Tester 3.5 inch LCD color monitor 3.5 inch LCD color monitor ● OSD menu operation ● Built-in multi-meters ● Video signal testing ● Audio signal testing ● PTZ controlling ● UTP cable testing ● Video signal generating ● RS485 data testing ● DC12V 1A power output ● 3000mAh rechargeable batteries power supply
3.5 CCTV Tester - 3.5-inch TFT LCD Monitor CCTV Tester 3.5 CCTV Tester is a 3.5-inch TFT LCD monitor. * 3.5 CCTV Tester adopts PAL/NTSC video system input . * It is specially used in CCTV testing and monitoring. * Its LED light indication can work under different working situation.
PG-68 - PATTERN GENERATOR The model PG-68 pattern generator generates a wide variety of test signals and patterns for testing, servicing, and adjustment of television, computer monitors, and video equipment.
Ranger TCG1 - Test Card Generator This generator provides a standard 75W, 1 volt peak-to-peak, PAL encoded CCIR video signal for the testing of monitors and other CCTV equipment. Four patterns are available
TCG1 - Test Card Generator This generator provides a standard 75O, 1-volt p-p; PAL encoded CCIR video signal for the testing of monitors and other CCTV equipment. The Test Card Generator TGC1 may display one of four test patterns , (i) Colour bars with reference, (ii) Red Raster, (iii) Peak White Raster and (iv) Composite Test Card (see picture below).
SC-TI06A - CCTV IP Tester 3.5" TFT-LCD Monitor 3.5" TFT-LCD Monitor 480(H)×320(V)Resolution IP Camera's Ping Testing, IP Address Scan DC12V,1A Power Output For Camera 1Ch BNC Input & 1Ch BNC Output,1CH Audio Input TDR Break-Point and Short Circuit Testing Support video snapshot Video recording and playback,screenshot
DLT710 - Digital Video Generator and Tester Artel’s DLT710 Digital Video Generator and Tester is an innovative, DigiLink based solution for simple, automatic link verification of serial digital video formats. Functioning as both a signal generator and test monitor for 3G-SDI, HD-SDI, SD-SDI, DVB-ASI, and ATSC, the DLT710 is ideal for automatic verification of single or multi-format video links.
Results 1 - 24 of 64
Video Test - instruments which test the video stream.
- Monitors x
- Audio (20)
- Audio Test (20)
- Cable Testers (11)
- Cameras (13)
- CCTV (23)
- CCTV Testers (13)
- Color (22)
- Computer (9)
- Digital (9)
- Generators (22)
- PAL (11)
- Pattern Generators (9)
- SDI (10)
- Signal (32)
- Signal Generators (17)
- Test Pattern (9)
- Testers (21)
- Testing (24)
- Video Pattern Generators (9)
- Video Signal Generators (13)
- »See All 308 Features