Transducer Amplifiers

The 6060 is a two-channel signal conditioning amplifier-digitizer module with 50 kHz or 100 kHz bandwidth and both digitized and analog outputs. The bridge input is ten-wire shielded with programmable constant voltage or constant current excitation and programmable completion for quarter, half and full bridge transducers. Automatic bridge bala ...more

The 6035 input module has eight channels of programmable transducer signal conditioning amplifiers and digitizer. Each channel has programmable voltage excitation, bridge completion and balance, programmable gain instrumentation amplifier, four-pole low pass filter and sample and hold amplifier. Channel outputs are multiplexed and digitized to ...more

Two channels of high-performance signal conditioning amplifiers for quarter, half and full bridge transducers. May also be used for RTDs, potentiometers, dynamic strain, voltage and voltage mode (ICP type) charge transducers. Each channel has programmable voltage or current excitation, autobalance, voltage and shunt calibration, differential i ...more

The 6037 has eight channels of strain gage or transducer signal conditioning amplifiers and digitizer. Each channel has programmable voltage excitation, programmable bridge completion and automatic balance, programmable gain instrumentation amplifier, four-pole low-pass filter and sample and hold amplifier. The amplified channel outputs are mu ...more

These high precision DRUCK transducers use a high integrity silicon diaphragm and are temperature compensated. They connect directly to a Model 7000 MACRO Data Logger (or via a 6142A Universal Amplifier Module to a Model 6004 STARLOGGER). Each transducer comes factory-calibrated with a calibration certificate. A transducer for a wider calibrate ...more

The 9355 is a transducer amplifier with a guarded 2-10 wire input. It provides programmable voltage or current excitation with remote sensing and excitation interrupt. Signal conditioning accommodates strain gages, ¼, ½ and full bridge transducers with automatic balance. Voltage substitution and DAC shunt calibration are standard. One and four ...more

Eight Differential Low-Level 16-Bit Analog Input Channels. Software-selected ranges: ±10mV, ±100mV, ±1.0V, ±10V.  Expandable to 128 Channels with Companion Expansion Boards. 16-Bit Scanning ADC. Instrumentation Amplifier per Input Channel ...more

High-performance, microprocessor controlled signal-conditioning amplifiers are used for transducer data acquisition. Advanced features include automatic zero, balance and calibration, computer monitoring and display of excitation and output, operator warnings for out of limit conditions, and digital data storage for transient and waveform capt ...more

The Model 314B is especially adapted to airborne applications involving shock, vibration, and temperature extremes. Able to condition and amplify signals from a variety of transducers, it is also used in missile, rocket and test sled applications. ...more

The Model 755 is a transducer conditioner and differential dc amplifier that offers outstanding performance; it also provides automatic zeroing of an off zero input upon local or remote command. Because of its extremely high isolation, the autozero feature produces a precise output zero without adding noise or loading effects to the input. ...more

The Endevco Model 7257AT is a small, hermetically sealed piezoelectric accelerometer with integral electronics, designed specifically for measuring vibration on flight test vehicles. This transducer offers the functions of a flight test accelerometer and an airborne charge amplifier in one small package. Its ±2.5V full scale output is biased at ...more

The Model 765 Programmable Transducer Conditioning Amplifier (PTCA) features full remote or front-panel manual control of virtually every operating function including: several excitation, signal conditioning, and calibration modes; amplifier input, output, filter and gain modes; and automatic and incremental zero and bridge balance modes. ...more

The Model 753A offers exceptional performance and versatility in a full featured but moderately priced transducer conditioning amplifier. This instrument offers a selectable constant voltage or constant current excitation supply, a 10 wire conditioner, a remotely controllable bipolar- or 3 step unipolar-, single- or double-shunt Cal, and an ex ...more

Signal conditioning hardware is a very important component of most measurement systems. A typical system includes signal conditioning hardware that interfaces the raw signals and transducer output to the measurement or data recording device. ...more

The Model 563H Transducer Conditioner Amplifier provides excitation, balance, calibration and precise amplification for one-, two- or four-arm bridges and other transducer types. Excellent low level operation allows its use with very low output sources ...more

The Model 560H DC Differential Amplifier provides amplification and/or buffering for low and high-level signal sources. The Model 560H is directly interchangeable with the Model 563H Transducer Conditioning Amplifier and utilizes the same enclosures. Gain is front-panel selectable from 0.01 to 25 or 1 to 2500 in 10 calibrated gain steps in a 1, ...more

The Model 416 is a transducer conditioner with a precision instrumentation amplifier for use in poor environmental conditions. Designed for use with almost any transducer, this conditioner-amplifier provides outstanding performance despite temperature extremes and high levels of shock and vibration. ...more

3-channel Human Vibration Front-end Type 1700 allows triaxial accelerometer measurements to be done with single-channel, 1/3-octave sound measuring instruments for example 2260 Investigator, 2260 Observer, Portable PULSE Type 3560 C and 2238 Mediator. It is battery powered and contains conditioning amplifiers for DeltaTron transducers. ...more

The Ectron Model 778 Wideband Amplifier / Conditioner is an ac-line-powered, all solid-state, high-performance, direct-coupled, wideband differential dc amplifier with transducer conditioning and filtering capabilities. Among its features are excellent linearity, stability, low noise, extremely fast overload recovery, and unique high-frequency ...more

The Trig-Tek, Inc. Model 224A Airborne Charge Amplifier is a miniature signal conditioner designed for dynamic measurements in extreme environments. Its compact size and rugged construction makes this amplifier ideal for remote, airborne and field applications. The Model 224A converts piezoelectric transducer signals to a voltage as a functi ...more

The Trig-Tek, Inc. Model 216DC Four-Channel Charge Amplifier, is designed to be used where rugged instrumentation is required, such as airborne or field measurements of vibration, shock or acoustics in extreme environments. The unit is comprised of four charge converter channels, with the provision to convert the output of any of the four chan ...more

The Trig-Tek, Inc. Model 203PC Advanced Signal Conditioner provides a wide range of settings, multiple outputs and programmable filtering. Though designed primarily for use in turbine engine test cells, the 203PC is ideal in any application that demands a versatile amplifier. ...more

Each DI-5B43 displacement transducer module provides a single channel of displacement transducer input which is filtered, isolated, scaled, and converted to a high level analog voltage output. ...more

DC Amplifier PCB for Strain gage transducers. Protection class IP65. Operating voltage range 18...30V. additional interfaces. electrically isolated in-and outputs ...more

Class A amplifier. Reliable. Tested and matched to EMC transducers. Safe operation into open-circuit and short-circuit ...more