SS7 - Protocol Simulator using MAPS GL's MAPS™-SS7 is an advanced protocol simulator/tester for SS7 simulation over TDM (E1/T1).MAPS™ can simulate Service Switching Point (SSP) and ISUP signaling specification as defined by the ITU-T standards. The tester supports testing network elements, error tracking, regression testing, conformance testing, load testing/call generation and generation of high volumes of ISUP traffic. MAPS™-SS7 functionality covers the ITU and ANSI variant of SS7 implementing MTP2, MTP3, and ISUP protocols. It is able to run pre-defined test scenarios against ISUP test objects in a controlled & deterministic manner.

SIGTRAN (SS7 over IP) - Emulator using MAPS MAPS™-SIGTRAN is an advanced protocol simulator/tester for SS7 simulation over IP Networks. It can simulate a Signaling Gateway and Softswitch ISUP signaling specification as defined by ITU-T standards. The tester supports testing network elements, error tracking, regression testing, conformance testing, load testing/call generation and generation of high volumes of ISUP traffic. MAPS™-SIGTRAN functionality covers the ITU and ANSI variant of SS7 implementing M3UA, and ISUP protocols. It is able to run pre-defined test scenarios against ISUP test objects in a controlled & deterministic manner.

PacketMaker™ II - SAS/SATA Traffic Generator PacketMaker™ is a flexible traffic generation product for high-speed serial storage buses. This bus exerciser is a great tool for developers of devices and controllers. PacketMaker was specifically designed for the unique requirements of high-speed serial bus protocols like Serial ATA and Serial Attached SCSI, and is the first such product for these protocols.

Summit Z2-16 Exerciser - Exerciser Traffic Generator The Summit Z2-16 is LeCroy's third generation exerciser (traffic generator), adding support for PCI Express at the new Gen2 data rates of 5 GT/s. The Summit Z2-16 Exerciser, in combination with the Summit T2-16 Protocol Analyzer, provides a complete test and development system for engineers working on new designs that use PCI Express 2.0 data rates.

CNIC-A2P - PMC module for the AFDX / ARINC 664 The CNIC platform is a high performance, PMC module for the AFDX / ARINC 664 protocol. With two independent ports for traffic monitoring, traffic generation, external triggering and analysis, the CNIC provides high-resolution time-tagging of incoming packets simultaneously with highly accurate traffic generation. An IRIG-B receiver/generator is included for synchronization to an external IRIG-B time source and for synchronization between multiple CNIC boards. Our exclusive pipeline architecture avoids the local bottlenecks of CPU-based interface solutions, and significantly outperforms standard NIC cards. The interface can be easily configured as either one dual-redundant AFDX / ARINC 664 port, or two high performance, independent ports. Simultaneous, real time traffic generation on both ports is highly accurate. Input and output triggers are provided, errors are detected or can be injected, while extensive link and protocol-level statistics are available for analysis. Programs have complete access to all frame and header data, can easily wrap data and perform extensive BIT testing. Each incoming packet is tagged with a 20 nsec resolution, 64-bit time-tag.

CNIC-A2P3 - PMC module for the AFDX / ARINC 664 The CNIC platform is a high performance, PMC module for the AFDX / ARINC 664 protocol. With two independent ports for traffic monitoring, traffic generation, external triggering and analysis, the CNIC provides high-resolution time-tagging of incoming packets simultaneously with highly accurate traffic generation. An IRIG-B receiver/generator is included for synchronization to an external IRIG-B time source and for synchronization between multiple CNIC boards. GE Intelligent Platform's exclusive pipeline architecture avoids the local bottlenecks of CPU-based interface solutions, and significantly outperforms standard NIC cards. The interface can be easily configured as either one dual-redundant AFDX / ARINC 664 port, or two high performance, independent ports. Simultaneous, real time traffic generation on both ports is highly accurate. Input and output triggers are provided, errors are detected or can be injected, while extensive link and protocol-level statistics are available for analysis. Programs have complete access to all frame and header data, can easily wrap data and perform extensive BIT testing. Each incoming packet is tagged with a 20 nsec resolution, 64-bit time-tag.

CNIC-A2PX - PCI module for the AFDX / ARINC 664 The CNIC platform is a high performance, PCI module for the AFDX / ARINC 664 protocol. With two independent ports for traffic monitoring, traffic generation, external triggering and analysis, the CNIC provides high-resolution time-tagging of incoming packets simultaneously with highly accurate traffic generation. An IRIG-B receiver/generator is included for synchronization to an external IRIG-B time source and for synchronization between multiple CNIC boards. Our exclusive pipeline architecture avoids the local bottlenecks of CPU-based interface solutions, and significantly outperforms standard NIC cards. The interface can be easily configured as either one dual-redundant AFDX / ARINC 664 port, or two high performance, independent ports. Simultaneous, real time traffic generation on both ports is highly accurate. Input and output triggers are provided, errors are detected or can be injected, while extensive link and protocol-level statistics are available for analysis. Programs have complete access to all frame and header data, can easily wrap data and perform extensive BIT testing. Each incoming packet is tagged with a 20 nsec resolution, 64-bit time-tag.

RAF-EC-2P - AFDX/ARINC 664 protocol traffic GE Intelligent Platforms’ RAF-EC-2P is a high performance interface for monitoring, generating or analyzing full-bandwidth AFDX/ARINC 664 protocol traffic. GE Intelligent Platforms’ exclusive pipeline architecture maximizes packet throughput using parallel controllers and efficient DMA transfers, thereby avoiding the bottlenecks of CPU-based interface solutions. Configurable as either one dual-redundant AFDX/ARINC 664 interface or two independent ports, users have complete access to all frame and header data. Each incoming packet is tagged with a 20 nsec resolution, 64-bit time-tag. Read time traffic generation is highly accurate. An IRIG-B receiver/generator is included for synchronization to external IRIG-B time sources and for synchronizing multiple CNIC boards. In addition, I/O triggers, error detection/injection, BIT, and link/protocol level statistics are provided.

CNIC-A2PU4 - Four Lane PCI Express Interface GE Intelligent Platforms CNIC-A2PU4 is a high performance Four Lane PCI Express Interface for monitoring, generating or analyzing full-bandwidth AFDX/ARINC 664 protocol traffic. GE Intelligent Platforms exclusive pipeline architecture maximizes packet throughput using parallel controllers and efficient DMA transfers, thereby avoiding the bottlenecks of CPU-based interface solutions. Configurable as either one dual-redundant AFDX/ARINC 664 interface or two independent ports, users have complete access to all frame and header data. Each incoming packet is tagged with a 20 nsec resolution, 64-bit time-tag. Real time traffic generation is highly accurate. An IRIG-B receiver/generator is included for synchronization to external IRIG-B time sources and for synchronizing multiple CNIC-A boards. In addition, I/O triggers, error detection/injection, BIT, and link/protocol level statistics are provided. The CNIC-A2PU4 comes with all the software development tools needed for user application development at no extra charge. The Cpcap, packet capture library, provides a complete set of functions for transmitting and receiving Ethernet frames.

Xgig Fibre Channel 1/2/4/8 Gb/s Load Tester - Fibre Channel Load Tester The Xgig Fibre Channel Load Tester brings essential Fibre Channel traffic generation capabilities to the Xgig Unified Protocol Analysis and Test platform, the industry's only complete protocol testing suite supporting multiple protocols and analysis functions in a single chassis.

Investigator AFDX - Protocol Analyzer Interface, Analysis and Test Support Investigator™ AFDX Protocol Analyzer supports network interfaces capable of full-line rate, multi channel and multiple protocol testing. Hardware supports analysis, traffic generation, statistics, impairment test, and BERT for both copper and optical interface connections. State-of-the-art FPGA technology is leveraged to facilitate flexibility and protect capital investments, while providing continued capabilities for development and support.

SNA Host Simulation System SNAsim is a powerful SNA 3270/5250 testing and traffic generation tool. It provides a PC-based environment for simulating the 3270 and 5250 data streams produced by IBM Mainframes using SDLC, Token Ring, and Ethernet connections. Ready-to-run tests are provided for: protocol conformance, functionality, load/stress, and host application emulation. A scripting facility is available to create additional tests.

Torrent 5100 - GGSN Test System The Torrent 5100 test system represents the state of the art in UMTS/GPRS traffic generation systems. It features highly realistic mobile simulation and full automation capabilities which can be used to both increase GGSN quality and decreasting testing cost and effort. Support for a wide number of protocols including HTTP, WAP, MMS, PTT, SMTP, POP3, FTP, and ICMP is built in, as is support for dynamic routing protocols and IP fragmentation.

Investigator Ethernet Protocol Analyzer for Ethernet, iSCSI, IP, and FCoE Investigator™ Protocol Analyzer for Ethernet, iSCSI, IP and FCoE Protocols supports network interfaces capable of full-line rate, multi channel and multiple protocol testing. Hardware supports analysis, traffic generation, statistics, impairment test, and BERT for both copper and optical interface connections.

AltaView - Advanced 1553 Analyzer Software AltaView is an advanced, multi-protocol analyzer that reduces integration and design time by visually displaying network traffic in an intuitive, easy to use application. The Next Generation in Avionics Analyzers Innovative Features Such as Frequency Displays for RT Subaddresses and Signal Capture to View the 1553 Waveform