Torque

Trialon's mechanical testing capabilities include Vibration, Shock, Squeak and Rattle, Tensile Strength, Compression Force, and various component level pull, bend and torque tests. Our vibration lab is state-of-the-art with PC controlled shakers which can simulate actual road vibration conditions. ...more

Nanovea High Load Pin-on-Disk Tribometer operates on the following principal: a flat, pin or sphere is loaded onto the test sample with a precisely known weight. The highly stiff elastic arm insures a nearly fixed contact point and thus a stable position in the friction track. The friction coefficient is determined during the test by measuring ...more

Brushless Servo Drive/Controller. Five programmable inputs for remote sequence select, trigger, and home limit, and two dedicated limit inputs. Several AC Brushless Servo motors are available from Compumotor providing up to 190 oz-in continous and 570 oz-in peak torque. Operates with standard differential, optical encoder for velocity and posi ...more

A new, patented technology (EMD-technology) is used to create the electrical voltage from the applied torque. The nickeliferous steel shaft is impregnated with a permanent magnetic pattern.Torque changes this pattern as well as the magnetic field.  ...more

Accurate and reliable motion control of the 1291BR Test Table is achieved with a servo controlled system consisting of a direct drive DC torque motor, a precision optical encoder, and an internal microprocessor based motion controller ...more

The T10F torque flange is the first torque flange representative. The T10F uses shear stress as a measure of torque for the first time, a measurement principle for which HBM applied for patent ...more

The TN torque transfer transducer is a non-rotating torque transducer specifically for use as a transfer standard or as a reference transducer in calibration laboratories and it complies with the most stringent accuracy and stability requirements ...more

The T20WN torque flange is specifically designed for measuring static and dynamic torque, rotation speed and angle of rotation in the laboratory, test and inspection sector, as well as in production monitoring and quality assurance. ...more

Friction Drive. The HPF3000 (High Performance Friction Drive) is a heavy duty, high performance linear module, capable of moving very large payloads over very long distances (exceeding 50 meters) at very high velocity (5 meters per second). It has a thrust capacity of 675 lbs. (3000 N) allowing aggressive acceleration of loads up to 1500 lbs.( ...more

Brushless Servo Systems. Torque mode operation with TQ10, +/- 10V analog input. An array of Brushless servo motors available providing torque up to 320 oz.-in. continuous and 640 oz.-in. peak. ...more

The ALS - sometimes referred to as a fin loader - is a general-purpose test instrument that can produce a wide range of rotary position motion, and/or active dynamic torque, to simulate loads that control surfaces experience during missile flight. ...more

Trace Labs conducts product qualification testing to MIL, SAE, ISO, IEC, IPC, ANSI, UL, to name a few. We also use your product's specific requirements and can assist you with writing your own test plan. Product reliability can save money. We can conduct reliability tests for marketing purposes, we can design and build holding and fatigue test ...more

T4A and T4WA-S3 torque transducers are specifically designed for measuring static and dynamic torque, rotation speed and angle of rotation in production monitoring and quality assurance. ...more

With even higher performance and expanded capacity range of 50W to 37kW. The MR-J2S is complimented by an outstanding family of servo motors all of which utilize an absolute 131,072 pulses per revolution encoder as standard. Other distinguishing features include higher frequency response to 550 Hz. The ability to accept pulse commands up to 50 ...more

Plug in and spin -- no set up required; drive auto-configures when used with Compumotor's "smart encoder" motor. +/-10V torque or velocity control -- use any controller with a standard +/-10V input. 4 versions available -- 100, 200, 400 and 750 Watts ...more

Brushless Servo Systems. Step and Direction operation with TQ10SD, step and direction input. An array of Brushless servo motors available providing torque up to 320 oz.-in. continuous and 640 oz.-in. peak ...more

Model DSRB-5CDA-4, 400Hz, Decade Synchro Resolver Bridge combines the functions of a decade synchro bridge and a decade resolver bridge into a single unit. A front panel switch changes the unit from one mode of operation to the other. The units are designed for testing control transmitters, differentials (rotors), and torques transmitters as c ...more

Stealth RX incorporates Parker Bayside's helical planetary technology in a lower cost package. Available in NEMA and Metric frame sizes, Stealth RX delivers high torque and quiet, smooth operation for less demanding servo applications. ...more

The patented HOYT 250° Analog Panel Meter utilize a highly damped, spring loaded pivot & jewel movement; mechanically interlocked, negating the use of adhesives and develops very high torque. The meters are desirable for the following applications.  ...more

The T10FM torque flange adds to the outstanding market reputation of the T10F torque flange, extending the range covered to higher nominal torques. ...more

Unique piezo gyro technology. Angle Meter clips onto standard 1/2" socket extension or similar drive tool. Measure Angle 0-199°. 1% CW accuracy. Simple arrow key operation to set desired angle, beep and flash feedback. Battery power provides 12 hours use (CR 2035). Auto power off.  ...more

The unique servo system for micro applications using the latest in servo technology operating at 24 VDC input with: patented Real-Time Adaptive Tuning; RS-232C serial interface for Windows based set-up (MR-Configurator); speed, positioning, and torque modes; low acoustic noise; and a built-in parameter unit. The MR-J2-JR supports the following ...more

High performance and compact, the MR-E is an excellent choice for applications up to 2kW. The MR-E is available in pulse-train position or analog speed/torque models. The amplifier features Mitsubishi Electric's legendary auto-tuning and vibration suppression functions, a 400Hz analog frequency response, and accepts pulse commands up to 500 kH ...more

147.1 Newton-cm using remote sensor. Peak mode. Data hold. Zero, min/max. Selectable Fast/slow sampling time. 15 Kg-cm torque sensor included  ...more

T4A and T4WA-S3 torque transducers are specifically designed for measuring static and dynamic torque, rotation speed and angle of rotation in production monitoring and quality assurance. ...more