Time Delay

The RAW-1 and the CM are panel mounted relays containing a series LED for visual indication and blocking diodes for prevention of alarm indication when the breaker is opened. If a trip coil or auxiliary trip relay coil opens, the LED goes out and the relay is deenergized. The relay itself is self-monitoring since opening of any of the series compon ...more

Power OFF Delay Timers, 1/16 DIN ...more

UltraScan is SynTest's solution to combat increase in test time. In 130 nm or smaller ? nanometer geometries, many defects become delay defects and it becomes necessary to use delay tests to detect the transition faults and path delay faults. Often bridging tests are also required. ...more

2000ms readout for testing latest delay action breakers. Fully programmed operation. Accurate digital read out of tipping time. Two neon lamps give quick check for correct wiring. Operates from mains supply. No need for batteries  ...more

The Laureate? time interval meter can display pulse width or time delay between individual pulses to a resolution of 0.2 µs. It can also display average pulse width or average time delay between multiple pulses. ...more

The AV-1015-B is a general-purpose, 0 to +/- 50V pulser, offering 10 MHz operation, 10 ns rise and fall times, pulse widths from 20 ns to 10 ms, and a variable delay of up to 10 ms. ...more

Sample rate (Internal clock): 200MHz asynchronous operation. Sample rate (External clock): 100MHz synchronous operation. Memory Depth (per channels): 128Kbits. Channel: 32CH. Upgrade Oscilloscope: to measure and decode I2C / UART (RS232C & RS485) / SPI Protocols and mixed signals. Clitch Capture Capability: 5ns. Bandwidth: 75MHz. Data decoding form ...more

Ramping Current Starting from : 5 to 999 mA. Sensitivity Disconnection Check : 5 to 999 mA. Time Delay Disconnection Check : 0.001 - 99.999s. Maximun Current Consumption : 10 mA. ELCB Voltage Measurement L - E : 10 to 330 Vac. Over Load between all terminals : 550 V ...more

Sample rate (Internal clock): 400MHz asynchronous operation Sample rate (External clock): 150MHz synchronous operation Memory Depth (per channel): 256Kbits Channels: 70CH Upgrade Oscilloscope to measure and decode I2C / UART (RS232C & RS485) / SPI Protocols and mixed signals Glitch Capture Capability: 5ns Bandwidth: 100MHz Data decoding formats: Bi ...more

The DWM-2104A is an active peak reading wattmeter with simultaneously variable hold time on both the forward and reflected meter movements. This variable delay can be adjusted for quick action for high speed CW, or for longer periods more appropriate for the display of SSB and AM voice peaks. ...more

Real Time Sampling : 1GSa/S, Equivalent Sampling : 50GSa/S. Waveform Math Functions. Trigger Modes : Edge, Video(odd field, even filled, all lines, line number), Pulse, Delay Trigger.  ...more

Sample rate (Internal clock): 200MHz asynchronous operation Sample rate (External clock): 100MHz synchronous operation Memory Depth (per channel): 2Mbits Channels: 32CH Upgrade Oscilloscope to measure and decode I2C / UART (RS232C & RS485) / SPI Protocols and mixed signals Glitch Capture Capability: 5ns Bandwidth: 75MHz Data decoding formats: Bina ...more

The TMM200 is a resource available for measuring such parameters as propagation delays, rise time, fall time and any other time-related parameter. Because of its wide input levels, the TMM200 is an instrument well suited to test both digital an analog devices. ...more

Sample rate (Internal clock): 400MHz asynchronous operation Sample rate (External clock): 150MHz synchronous operation Memory Depth (per channel): 2Mbits Channels: 70CH Upgrade Oscilloscope to measure and decode I2C / UART (RS232C & RS485) / SPI Protocols and mixed signals Glitch Capture Capability: 5ns Bandwidth: 100MHz Data decoding formats: Bina ...more

Sample rate (Internal clock): 200MHz asynchronous operation. Sample rate (External clock): 100MHz synchronous operation. Memory Depth (per channel): 1Mbits Channels: 32CH. Upgrade Oscilloscope to measure and decode I2C / UART (RS232C & RS485) / SPI Protocols and mixed signals. Glitch Capture Capability: 5ns. Bandwidth: 75MHz. Data decoding formats: ...more

Sample rate (Internal clock): 200MHz asynchronous operation. Sample rate (External clock): 100MHz synchronous operation. Channels may be selectively defulted to / Channels: 16 CH. Upgrade Oscilloscope to measure and decode I2C / UART (RS232C & RS485) / SPI Protocols and mixed signals. Glitch Capture Capability: 5ns. Bandwidth: 75MHz. Data decoding ...more

The AV-1010-B is a GPIB/RS-232-equipped general-purpose, 0 to +/- 100V pulser, offering 1 MHz operation, 10 ns rise and fall times, pulse widths from 25 ns to 10 ms, and a variable delay of up to +/- 1 second. ...more

The ATG9100 is a reflective target generator intended to be used in conjunction with 24 GHz automotive speed cameras that use CW, FMCW, or stepped-frequency waveforms. It will receive a signal from the speed camera, provide programmable time delay and Doppler shift, then re-radiate the signal back to the camera. Delays can be programmed from a mini ...more

Full-scale sled and safety testing. Integrated high-speed digital video imaging and data acquisition. Engineering staff with 15 years of safety testing experience. Multiple squib firings with variable time delay, amplitude, and duration. Provides squib resistance data. ...more

60MHz Bandwidth With Monochrome LCD Display. 125k Long Memory and 12 Division Horizontal Display. 25GS/s Sampling Rate for Repetitive Waveforms. Advanced Trigger : Pulse Width , TV Line, Event Delay and Time Delay. Go/NoGo and Auto Setup Sequence  ...more

State Analysis : Up to 100MHz External Input Clock. Memory Depth : Up to 2Mbits/1Mbits (Half/Full Channels). Advanced Trigger : Count, Page, Time Delay and Clock Event Delay ...more

The Digiphone is a very sensitive device to pinpoint and locate difficult or "quiet" faults on primary cables. Its operation is based on the "thunder & lightning" principle. The flashover at the fault will generate both a magnetic and acoustic signal. The time delay between the two signals (speed of light vs. speed of so ...more

250MHz Bandwidth With Monochrome LCD Display. 125k Long Memory and 12 Division Horizontal Display. 25GS/s Sampling Rate for Repetitive Waveforms. Advanced Trigger:Pulse Width,TV Line,Event Delay And Time Delay. Go-NoGo and Auto Setup Sequence  ...more

250MHz Bandwidth With Color LCD Display. 125k Long Memory and 12 Division Horizontal Display. 25GS/s Sampling Rate for Repetitive Waveforms. Advanced Trigger:Pulse Width,TV Line,Event Delay And Time Delay. Go-NoGo and Auto Setup Sequence  ...more

Including SILENT EMC/EMI Design Services early in your development cycle minimizes risk and makes very smart business sense. We help our clients avoid schedule-breaking design problems that can delay product time-to-market. Our expertise in the design of schematics, PC boards, cables, and enclosures has saved our clients months of development time. ...more