|Sponsor Your Catalog|
1935 - Heavy-duty Solenoid Voltage Tester, Checking Voltages from AC/DC 120V to 600V Tests voltage from AC/DC 120V to 600V Case serves as prod holder for one hand operation Self-storing prods Dual voltage indication: solenoid vibration sensing and electronic neon and visual indication Positive or negative polarity of DC indicated by neon lamp With UL, cUL approvals
SST-160 - Solenoid Tester A The SST-160 Solenoid Tester is a highly advanced computer based machine for automatically checking all types of starter solenoids. The tester allows an unskilled operator to check up to 2000 units per shift, verifying all important parameters of the solenoid. All results are displayed on the color touch screen monitor.
Pro48 - Irrigation Solenoid Activator and Clock Tester The Pro48 is a new, low cost hand held tester that chatters and opens solenoids, verifies clock 24v output, checks wires for shorts or opens, and tones. All of these features add handy capability to any irrigation or green contractors tool box and for less than $100, doesn't cost a lot of money. Uses 2 9v batteries (not included). The Pro210F probe is optional.
GVT-392 - Solenoid Voltage Tester Test AC/DC Voltage from 120 - 480 V and DC Polarity. Dual voltage indication: solenoid vibration and neon bulb.
VT157 - "proVoltTM" Digital Audible Voltage/ Continuity Tester- Solenoid Type Digital display 10 to 600 VAC/DC 2% accuracy. Solenoid vibration voltage indication. Audible tone for continuity and voltage. Replaceable leads with retractable shrouds. Batteries energize continuity buzzer only, for safe voltage testing. Miniature size.
Solenoid Tester Highly compact desktop test equipment Micro controller based equipment Measure pull in voltage, pull out voltage Measure coil resistance Auto/manual modes of operation Digital input and output interface Visual indication of results Used in relay testing application High current drive Short circuit output protection
VPC-30 - Electrical Tester with VolTect and Built-in Shaker Rugged and easy-to-use testers for live voltage and continuity checks. Built in shaker provides the same functionality and feel as older analog solenoid testers with benefit of full input protection to CAT IV 600V/CAT III 1000V.
VPC-31 - Electrical Tester with VolTect, LCD Display and Built-in Shaker Rugged and easy to use testers for live voltage and continuity checks. Built-in shaker provides the same functionality and feel as older analog solenoid testers with benefit of full input protection to CAT IV 600V/CAT III 1000V.
T+PRO-1AC - Electrical Tester & AC Voltage Detector Kit The T+PRO-1AC Kit combines two troubleshooting tools, in one convenient combo pack. The T+PRO Electrical Tester has all of the advantages of a traditional solenoid tester, with added functionality, but none of the typical drawbacks. With voltage measurement, continuity, built-in flashlight, GFCI trip capability, and the legendary ruggedness and reliability of Fluke.
SFT F4-4010 - Shirley Flammability Tester Shirley Flammability Tester, to determines the flammability resistance of vertically oriented fabrics and soft fabric toys, it measures the flame-spread time of textiles specimens burnt at the vertical under controlled flame-impingement conditions. The SFT F4-4010 Shirley Flammability Tester is equipped with a solenoid operated gas burner and micro-switch operated trip threads, it is provided with color touch screen LCD panel and interactive interface, and the test results can be directly saved in the USB flash memory without a computer connected. Then, the data can be re-called, edited, and stored in test report by the user’s computer using our supplied software.
Analog Magnetometer Analog Magnetometer for very low magnetic fields. Measuring range: ±20 G. The solenoid-Tester detects magnetic fields by LED or buzzer.
137 - Power On Circuit Tester Supplies power or ground to test operation of electrical motors, solenoids and more by supplying power or ground. For 12V or 24V systems. Safe (in test mode) for computer circuits.
500 Series - Free Running Starter Tester 12, 24, 32 volt, heavy duty production tester for automotive and diesel starters, with or without solenoids. Requires 120/240 volt, AC current, 60 Hz. Two 3" meters: Shows voltage drop during cranking, 0-15 volts. Shows cranking current, 0-300 amps. Easy to operate vise for rapid loading and unloading of starter.
VT150 - Voltage Tester Dual voltage indication: Solenoid vibration sensing and electronic neon visual indication. Positive or negative DC pole identified by neon lamp. Durable metal probes capable of piercing insulation covered conductors. Self-extinguishing, high impact sealed case and prod assemblies preventing dirt, dust and small objects from enter ing the tester.
VT 154 - Voltage/Continuity Tester Three voltage indications: Solenoid vibration sensing, electronic neon visual indication, and audible buzzer. Positive AC/DC voltage identification: 6 to 600 VDC 60/50 Hz. Electronic buzzer indication for AC/DC voltage and continuity. Self-extinguishing, high impact sealed case and prod assemblies preventing dirt, dust and small objects from enter ing the tester.
21300 - Heavy Duty Circuit Tester for 18, 24 and 36 Volt Systems Checks AC and DC wiring up to 36 volts. Use to check series-parallel switches and solenoids on tractor-trailer starter systems. An absolute must for the trucking, farm, heavy equipment and trailer industries. 48" ground wire.
ST-118 - Starter Tester The most advanced combination of hardware and software for automotive starter testing. Fully automated positioning, clamping and connections for high volume applications at the touch of a button. High accuracy, including loaded performance, free run speed with sensor and solenoid block Test
ST-24 - Starter Tester The ST-24 is designed to provide a fast accurate and detailed tests of a starter. The machine checks the starter simulating real working conditions of the vehicle. For an accurate starter test the ST-24 analyses the device timing. This way the machine can detect solenoid, drive and spring problems.
ST-124 - Starter Tester The ST-124L is designed to provide a fast accurate and detailed tests of a starter. The machine checks the starter simulating real working conditions of the vehicle. For an accurate starter test the ST-124L analyses the device timing. This way the machine can detect solenoid, drive and spring problems.
ST-20 - Starter Tester Fully automated precise testing for high volume applications at the touch of a button. Load test units up to 50 Nm (optional 75Nm) with improved accuracy. Optional free run speed sensor and Solenoid Block Test
ST-16 - Starter Tester The ST-16 is designed to provide remanufacturers and OEM manufacturers with fast accurate and detailed test of the starters. Designed for precise testing for high volume applications at the touch of a button. Solenoid timing is measured on the unit which allows the machine to detect problems related to out of specification components or faulty assembling. During the test, the ST-16 recognizes automatically the starter rotation direction and applies a programmable load.
3631 - Heavy-Duty Logic Probe Tester Multi-functional design allows testing range of 3?26 volts. Bright red and green LEDs interpret voltage signals such as ground, power, and frequency. Tests fuel injectors, solenoids, presence of serial data, and tach reference signals. Output tests on MAF, Cam, Crank, Hall Effect VRS sensors and more
9062 - Motor rotation and rotary field indicator with contact-free detection UNITEST M-Indicator
Motor rotation and rotary field indicator with contact-free detection
• Three-in-one Tester:
1. Rotary Field Indicator – indication of the three phases via LED
2. Motor Rotation Indicator - Display of motor rotation direction
3. Contact free determination of the rotation direction of running motors
• Swift determination of the rotary field as for conventional rotary field indicators
• Magnetic field detection to detect AC solenoid valve
• Contact-free determination of rotation direction of running motors. Ideal if motor shafts are not visible or difficult to access. (i.e. circulating pumps)
• Voltage free and safe detection of three phase motor connectors (UVW)
• Indicates the motor rotation before starting the motor
Results 1 - 23 of 23
- Solenoid Testers x
- Automotive Testers
- Circuit Testers
- Continuity Testers
- Electrical Testers
- Ground Testers
- Power Supply Testers
- Power Testers
- Sensor Testers
- Starter Testers
- Voltage Testers