Test

Sponsor Your Catalog
  • CKT1175-MBA - Multiple-Bus Architecture Cable/Harness Test System The CKT1175-MBA (for multiple-bus architecture) will provide seamless testing of electronic racks, panels and chassis containing passive and active components such as relays, solenoids, switches, circuit breakers, lamps and LED's, diodes, resistors, capacitors, etc. This functionality is made possible by a switching matrix that is up to 10 levels deep, plus a multiplexer that controls the various stimuli sources, instrumentation connections, and external energization outputs. 
    CK Technologies
  • LS6601A - Universal Test System Based on LXI bus LS6601A Universal Test System is based on LXI bus, primarily used for functional verification of electronic products or systems, parametric tests. Because the system design is based on LXI bus structure, so its addition to common features versatility, scalability, etc.
    Acery Technologies
  • pcibus1b - PCI bus test adapter All important PCI bus signals routed to pin headers for easy connection of logic analyzer. Filter assistance for logic analyzer: D-FF to delay FRAME# by one cycle. To see actual PCI data transfers, filter for FRAME2# high + FRAME# low (address phase), or IRDY# low and TRDY# low (data phase). Business card size. Notched for 5V PCI bus (can be used on 3.3V bus with mechanical modification).
    PC Engines Gmbh
  • Bi-Series - Bus Test Instrumentation With up to four buses of emulation in a single VXI slot, Teradyne’s Bi-Series of serial bus test instruments (BTI) assume a wide range of serial bus protocols required in defense and aerospace test environments. The Bi-Series BTI is software-reconfigurable to assume the bus protocol requirements of serial communications buses used in operational or factory environments.
    Teradyne
  • QP-1394TSA - Base 1394 Test Suite Application QP-1394TSA implements the protocol tests defined by the 1394 Trade Association's 'Base 1394 Test Suite Definition'. QP-1394TSA provides an automated means to conduct this test. An external 1394 bus analyzer is required to complete some tests.
    Eagletek
  • Automotiv Test System DTS-PS Test system for on-board charger, auxiliary heating, etc. * Safety test
    * Power tests (measurement of voltage, current, power)
    * Tests (power factor, phase angle, Ripple/Spikes/Noise, etc.)
    * Function tests (digital in and output, load test, etc.)
    * Customized solutions
    * CAN- Bus
    * K- Bus
    Deutronic Elektronik
  • BUS MANAGEMENT UNIT Solution to test redundant Architecture of BMU Comprehensive test system performing tests of > 3000 I/O's Special test circuits using hybrid / ceramic components to operate in Thermovac chamber Tests various subsystem functionalities like, AOCS, Sensor Electronics, Telemetry, Tele-command with Self test and application test software
    Data Patterns Pvt
  • QP-1394TSA - Base 1394 Test Suite Application QP-1394TSA implements the protocol tests defined by the 1394 Trade Association's "Base 1394 Test Suite Definition with Extension for 1394b". QP-1394TSA provides an automated means to conduct this test. An external 1394 bus analzyer may be required to complete some tests.
    Quantum Parametrics
  • Car dashboard end detection test system Car dashboard end detection test system based on flexible testing technology, combined with advanced test and measurement technology, machine vision techniques and bus communication technology, based on the detection of CAN bus communication protocol and VAN modular car dashboards performance and appearance.
    Beijing Pansino Solutions
  • onTAP ProScan - Boundary Scan (JTAG) Test Software onTAP provides comprehensive boundary-scan test development tools with powerful run time software including pin-level diagnostics. onTAP provides everything required for robust JTAG test solutions. Robust ATPG for high fault coverage and precise pin-level diagnostics. Interconnect, Bus Wire, Pull-up/Pull-down, TAP Infrastructure tests, Shorts and Opens. Memory/Cluster tests employ Virtual Pins to test non-JTAG memory and FLASH devices.
    Flynn Systems
  • AMS 3000 - Goniophotometer SMS Test of lighting devices for development, quality control, and regulation fulfillment for certifying laboratories, automotive and automotive lighting industry, traffic signals, bus, train, ship, and aircraft lighting test houses
    Optronik
  • VX8800 - Functional Test System The universal functional test system can be configured modular with standard instruments based on VXI-Bus, CPCI/PXI-Bus, or any other computer based interfaces.
    VX Instruments GmbH
  • USBee Digital Test Pod The USBee Digital Test Pod combines state of the art design with easy to use PC software to give you a complete digital test bench in a small and affordable package. Connecting to your PC, the USBee Digital Test Pod uses the power and speed of the USB bus to capture and control information from your own hardware designs.
    CWAV
  • TFV-1. - Functional and Vision Test Functional and ICT Test Platform for PCB’s and assembled devices. Pneumatic CUT fixing system onto the test fixture. YAV switching boards CAN bus controlled installed in the Mass Interconnect Receiver. each instrument includes NI Lab & Test Stand drivers and Virtual Control Panels.
    Equip-Test Kft
  • Primary Injection Test Sets Primary Injection test sets are used to loading. Calibration and testing of CT's bimetals relays, Protection relays etc. Mostly Primary Injection Test set are designed as per customer's specification. The Primary Injections Test sets are of 15 minutes ON/30 Minutes OFF duty i.e. testing duty only. Loading transformers are design for continuous use for Temperature Rise for bus duct/Bus Bar etc.
    Monarch Electronics
  • Primary Injection Test Sets Primary Injection test sets are used to loading. Calibration and testing of CT's bimetals relays, Protection relays etc. Mostly Primary Injection Test set are designed as per customer's specification. The Primary Injections Test sets are of 15 minutes ON/30 Minutes OFF duty i.e. testing duty only. Loading transformers are design for continuous use for Temperature Rise for bus duct/Bus Bar etc.   
    Rectifiers & Electronics
  • TestCentre - Digital / Analog Test Development Software ARC’s TestCentre™ software is an integrated suite for the complete development of digital, analog and mixed signal test systems. The TestCentre™ suite consists of tools for developing digital test program sets, building sophisticated test sequences, and automating the test process, be it in a low volume, R&D, or high volume production environment. TestCentre™ is designed to allow engineers, developers and technicians to get past the test creation learning curve as quickly as possible and focus on the task at hand with an intuitive user interface. Specifically for digital test developers, TestCentre™ includes the DS Configuration Editor Module, which allows users to quickly create digital field definitions, associate tester hardware I/O with UUT I/O, set variable voltage and advanced timing configurations, create conditional criteria, and configure all of the options needed for a digital TPS. The DS Source Builder then allows users to graphically create digital vectors for stimulus and response, build reusable functions and subroutines for more sophisticated digital patterns (such as memory tests, CPU tests, and bus emulation), and compile the graphical projects into DS executable programs.
    ARC Technology Solutions
  • Test Engines The test system cluster architecture is based on dual CPU or 4-CPU PCs acting as cluster nodes. The nodes communicate and synchronise over a high-speed network (Myrinet or InfiniBand). A modification of the Linux operating system allows to run the test execution and evaluation algorithms in hard real-time on reserved CPUs, where scheduling is non-preemptive and controlled by the test system itself. The interrupts caused by interfaces to the system under test may be relayed to CPUs designated explicitly for their handling. This approach offers the opportunity to utilise high-performance standard hardware and the services provided by the widely accepted Linux operating system in combination with all mechanisms required for hard real-time computing. The cluster architecture presents an opportunity to distribute interfaces with high data throughput on different nodes, so that PCI bus overload can be avoided. In addition, the CPU load can be balanced by allocating test data generators, environment simulations and checkers for the behaviour of the system under test (“test oracles”) on dedicated CPUs.
    Verified Systems
  • A429-PCBAN - Portable ARINC 429 Bus Analyzer System ully integrated, pre-configured, turnkey portable ARINC 429 bus analyzer test system ideal for mobile test and maintenance duties Windows 7 / Windows 8 notebook PC ARINC 429 interface options
    TechSAT GmbH
  • High Voltage switching This switching matrix enables the switching between different test points, when performing dielectric strength test and Hipot test. It is featuring High Voltage relays, controlled through CAN bus. The module features one relays normally closed, with a red LED that is indicating its status, that when no power, will keep J2 and J3 input terminals linked through a resistor, to ensure electric discharge of all loads after the test. Conexions are made with special high voltage connectors. Input terminals from Hipot tester are in front of the module, while up to 8 outputs are in the back panel.
    Equip-Test Kft
  • BDT1012 - Cell & Battery Test Equipment, Primary Test Equipment 24 Independent channels Independent microprocessor-controlled test unit Linked with PC controller through CAN-bus Full scalability More than 5000 test positions per PC High accuracy of 0.03% FSD AUTO calibration 4 point measurement DYNAMIC electronic load Four automatic switched current ranges Fully configurable load profile in current, resistance, power and voltage Guaranteed data-integrity FULL INTEGRATION in customer's network National language support
    PEC
  • 32-bit PCI Bus Extender # The Extender has a straight PCI test connector and a right angle PCI test connector (optional) # Supports 5V and 3.3V signaling environments as well as live insertions for the plug-in board # Supports external power supply for the generation of all PCI voltage levels for the PCI test connector (+5V, +12V, -12V, +3.3V and VIO (may be 5V or 3.3V)) # Power monitoring and current limiting for PCI test connector # FPGA byte blaster functionality for different types of FPGA (like Xilinx, Altera, Atmel, Lattice) # Master I2C and SPI interfaces
    Amfeltec
  • Avionics Test & Simulation PXI Systems Fully integrated high-channel density Avionics Test & Simulation PXI systems for LabVIEW® applications. The AIT Avionics Test & Simulation PXI systems feature fully integrated high-channel density avionics data bus test and simulation systems for Fibre Channel, MIL-STD-1553, ARINC 429, and ARINC 664 using AIT's industry-leading PXI and PXI Express avionics interface modules with LabVIEW® certified device drivers.
    Avionics Interface
  • ISMC32ES-EU - ISMC UTEL's smallest Intelligent Switch Matrix Controller (ISMC). Ideal for medium density sites with the 1 individual switch bus capable of controlling 7000 line test circuits. A single ISMC is required per building to control all TASM equipment. The ISMC32ES has 2 seperate four wire test buses, this allows it to switch 2 circuits simultaneous to two seperate Test Heads. The four wires split the circuit allowing true 2 wire look in and look out.
    United Technologists

Results 1 - 24 of 198

Test - An activity in which a system, device, component or signal is executed under specified conditions, the results are observed or recorded, and an evaluation is made of some aspect of the tested element.