TEM Cells

A pocket solution for all RF power measurements.PMM 6600 is a simple and easy-to-use RF power meter mainly designed for EMC applications in order to calibrate CDNs and CLAMPs for conducted immunity systems or to measure the input power forwarded to antennas or cells. Using a bidirectional coupler and two PMM 6600 it is possible to measure the r ...more

KL-167 intellectual acidometer is an accurate electrochemical apparatus which is used to measure the sodium ion and basicity, electrode potential and the temperature of solutions.It is an accurate secondary instrument with LED digital display. It can be used with various ion selective electrodes to measure cell potential of electrodes in solut ...more

CX77315, a quad-band PA module designed for cellular handsets comprising GSM850/900,DCS1800, and PCS1900, also supports Class 12 GPRS multi-slot operation. It consists of separate GSM and DCS/PCS PA blocks, impedance-matching circuitry for 50 ohm input/output, and a PAC block with an internal current-sense resistor. The GaAs die, the Si die, a ...more

The new Model CT485B completely self-contained temperature/ relative humidity recorder is microprocessor based to accurately measure, indicate and record temperature and relative humidity. This rugged unit comes standard with alarms. They contain a single, integral relay contact which closes in response to an alarm condition. Simultaneous high and ...more

MODEL TL5 Intelligent Test Load for Batteries and Fuel Cells is a passive electronic load with built-in microprocessor intelligence, with the ability to briefly interrupt the current and take resistance free cell potential readings with programmable delay. There are additional inputs for a reference electrode and for a temperature sensor. ...more

The UV-VIS-NIR spectrophotometer provides a total capability for spectral analysis of materials and components of DSC. Its major roles are in the analysis of dyes, dye adsorption and electrolytes. Options of large sample compartment, constant-temperature and ultra-micro cell holders enable a wide range of measurement possibilities. ...more

SADC(Sensor A/D Converter) series A/D converter module providing high accuracy "instrument" grade perpormance for sensor measuring application, including temperature, pressure, load cell, strain-gauge... the SADC integrate the A/D converter and linerization function in the same device, in most case, for sensor whose transfer functio ...more

DP80 Series digital indicators offer complete expandability to effectively meet your changing needs. A custom designed, integrating voltage-to-frequency A/D converter combined with precision filtering, isolated electronics, and multi-segment digital linearizations lets the DP80 Series accommodate wide measuring ranges at a very high resolution - hi ...more

The Evaluator series “HT” (High Temperature) is specially designed for testing solid-electrolyt fuel cells (solid oxide fuel cells or SOFC) with maximum temperatures of 1,000°C. The test stations can be used for characterization of components, the evaluation of SOFC single cells, stacks, complete systems and hot-box systems as well as for optimiz ...more

QUICKCELL QC200 is an electrochemical test cell designed for testing of gas diffusion or solid electrodes in controlled laboratory environment in fuel cell and battery R & D and quality control. Electrode coupons of 5 cm2 area are very easy to mount. Electrolyte in the cell reservoir is maintained at desired temperature by means of a circul ...more

The SBS-1001 Digital Hydrometer sets you free from the ordinary nuisance of battery testing. Its digital readout let's you know the specific gravity and temperature for the electrolyte, and the cell voltage for lead acid batteries. ...more

CONIMED Model TD50 / LS is an integrated system to perform tan delta tests on insulating materials like transformer oil. The test cell supplied fulfills requirements of Standards IEC 247 and 250, and ASTM D924 and D150. The test cell is normally used together with the digitally controlled thermostatic bath Model TB110, that allows tests to be ...more

EMS, EMI, measurement for sensitivity of RF communication equipment, calibration of E-field probe and IC circuit test. ...more

The Fuel Cell Test Stations provides control of flow, temperature and pressure for the anode and cathode gases. The station incorporates a DC electronic load. The Station also includes two humidity bottles, an Operating Manual and a computer utilizing LabView-based software. ...more

The TEMpact GHz TEM Cell was developed especially to permit EMC radiation testing of smaller EUT (equipment under test) in a shorter time and at a lower price. In addition to the comparatively low purchase price of the cell itself, the cost incurred by the necessary measuring equipment, too, will be reduced. Another advantage is the little spa ...more

The Evaluator series “LT” (Low Temperature) is typically used for testing polymer-electrolyte (PEM) and direct-methanol (DMFC) fuel cells with maximum temperatures of 130°C. For testing high temperature PEM fuel cells, we offer options with maximum temperatures of 180°C or 250°C. ...more

The SHD033 matches the sensitivity of a PMT using solid state amplification of a silicon photodiode. The proprietary preamp is unique in that it preamplifies the current-chopped junction charge of the cell, providing an 82 dB linear response. Built-in temperature control and leakage shielding minimize noise and dark current.  ...more

Flat panel displays (FPD) are everywhere, from televisions to computer monitors, notebook PCs and cellular phones.  Low-temperature-poly-silicon (LTPS) technology in particular is widely adopted and well suited for mobile applications such as cellular phones and digital cameras.  ...more

The EL-USB-LITE is a low cost USB temperature data logger with a measurement range of -10 to +50°C (+14 to +122°F) and a fixed sample rate of 30 minutes. The data logger can store over 4,000 readings and is supplied with a coin-cell battery, which provides approximately 1 month s usage. By pressing the button a red/green LED indicates whether a ...more

The EuroCellTM is a complete, ready-to-run electrochemical cell for corrosion measurements. The sample, usually a cylinder, is secured to a threaded steel rod. The EuroCell will accept any sample that can be drilled and tapped with a 3-48 thread. It's available in both (1) an unjacketed model and (2) a jacketed version to control the temperature ...more

The Imacc system has several cell based accessories tailored to industrial monitoring and process control. These vary from fixed 10-cm cells to variable path 150-m folded-path cells. All cells can be heated to over 200° C and automated temperature control systems are available.  ...more

Dr. Bob's Cell is an electrochemical cell kit designed for flexibility and convenience. It's built to handle sample volumes from 1-30 mL. It's available in both (1) an unjacketed model and (2) a jacketed version to control the temperature of the electrochemical experiment. ...more

These conductivity cells have extremely high temperature andpressure ratings: the threaded types can handle 16 bar at 200°C and the flanged types can handle 40 bar at 250°C ...more

Reads specific gravity and temperature from batteries that have a 5/16" corner access tube. Package includes; carry case and a 6 month limited warranty. Please note that the battery cells must have a 5/16" corner access tube to enable a reading to be take ...more

SOLAR300 carries out all the recommended tests to check the performances of single and three phase photovoltaic installations. SOLAR300 measures output DC power of the cells, output AC power of the inverter, solar radiation and temperature of the cells. ...more