Spectra

The Model 5112 is a portable RF four-carrier generator that is AC and DC powered. Each RF carrier can be activated individually or simultaneously. The RF carriers generated are extremely clean and stable, thus making the 5112 an ideal instrument for testing/aligning CATV forward and return bands, as well as institutional networks. ...more

The PF-1UA-16FA is a 16-channel filter/amplifier and the PF-1UA-8FA filter/amplifier is an 8-channel, both offering a choice of either 4 or 8-pole low-pass filters or 8-pole band-pass filters. Cutoff settings from 1 Hz to 204.6 kHz are supported. The low-pass filters may operate in either a 'flat' mode for maximally flat pass-band amplitude re ...more

The new Sekonic PRODIGI COLOR C-500 is the world's only photographic color meter designed to read spectral sensitivity of both color film and CCD and CMOS sensors used in modern digital still and DV cine cameras. Serious photographers and cinematographers know that good lighting and proper exposure are more important now than ever. ...more

The DDS6m Direct Digital Synthesizer Module is a Precision 40 MHz Signal Source on a small (2.5" x 3.5") circuit board. It provides both Sine and Clock outputs from 100 Hz to 40 MHz in 0.025 Hz steps. The RS232 serial interface makes it easy to set the output frequency and save the settings in EEPROM memory. It has excellent spectral ...more

The J25 provides a nearly flat spectral response from UV to Far IR due to the absorptive black organic coating. ...more

The most commonly used instrument for the measurement of the optical performance of thin-film coatings is a spectrometer. Using a StellarNet fiber optic spectrometer coupled to a reflectance probe and fiber optic light source, it is possible to measure film thickness by detecting the sinusoidal fringe pattern from the samples specular reflectance. ...more

Luzchem's TFA-11 instrument combines the power of interferometric measurements of dry and wet thin film thickness, with a versatile, cost effective dissolution rate monitor. Its multi-wavelength design with a 2048 diode detector gives it the best spectral resolution in the market. ...more

The Middleton Solar SP02 Sunphotometer is a simple low-cost instrument for the determination of the spectral optical depth of the atmosphere. It can be configured for total & aerosol optical depth measurement, column ozone measurement, and assessment of water vapour amounts. It consists of four precision spectro-pyrheliometers axially aligned in a ...more

MS-701 is the all weather grating spectroradiometer for the continuous outdoor use. The spectral range of MS-701 is 300-400nm, which cover the UV(Ultraviolet) range, and the attached software automatically calculate UV-A and UV-B. MS-701 is appropriate for the exposure test of building materials/paints, and the research of harmful influence of UV a ...more

MS-700 is the all weather grating spectroradiometer for the continuous outdoor use. The spectral range of MS-700 is widely 350-1050nm, and attached software automatically calculate PAR(Photosynthetic Active Radiation, W/m²), Photon(µmol·m-2·s-1) and Lux(lux). MS-700 is appropriate for the observation/research of radiation/aerosols, investigation/re ...more

FSIQ - the one box solution in signal analysis. Analysis in frequency, time, and modulation domain in one box. The minimum sweep time for FULL SPAN is 5 ms (FSIQ3/7). The sweep is synthesizer-controlled for all frequency settings, thus providing considerably higher accuracy of the displayed spectra than comparable spectrum analyzers. ...more

These instruments are calibrated to measure the spectral irradiance in units of watts m-2 (watts per meter2) over the wavelength range in nanometers (nm) provided by the selected spectrometer model. The factory performs a calibration for the appropriate wavelength range from 300-850nm or 350-1100nm using an NIST traceable calibration source lamp. ...more

The new AvaSpec-2048x14 has a USB2 interface with fast data sampling of 450 spectra per second and data transfer in 2.24 msec  and supports analog in-and outputs as well. Optional Bluetooth® (-BT) communication and an SD card for on-board saving of spectra can be added.  ...more

The UVM-2 is a UV microscope that can also image in the visible and NIR spectral range.  This UV-visible-NIR microscope incorporates advanced optics for cutting edge UV, color and NIR imaging and visualization.  The system has a flexible design, is very easy to use and very durable. It is designed with state-of-the-art CRAIC optics for the high ...more

Light Touch is an interactive Windows 2000/XP spectral-analysis software program that controls any Gamma Scientific spectroradiometer system. Intuitive and powerful, the software is also an ideal stand-alone data analysis package. ...more

Run Controlled spectrum random tests (tests with a spectrally shaped gaussian amplitude distribution). Frequency/amplitude breakpoints are entered in an easy to read tabular form using either frequency and amplitude breakpoints, or by entering one endpoint and the desired dB/octave slope. Over 1000 separate frequency/amplitude breakpoints can ...more

This series of devices offers a high-quality, yet low-cost solution to your detection needs. The P1-10 features a rugged lithium tantalate (LiTaO3) pyroelectric element (1, 2, 3, 5, & 9 mm in diameter for P1-11, P1-12, P1-13, P1-15, & P1-19, respectively) mounted in a miniature TO-5 or TO-8 transistor package. Detectors are furnished w ...more

The R&S AM300 is a dual-channel Arbitrary/Function Waveform Generator that offers high functionality and spectral purity at a favourable price. With its superior characteristics, the instrument reproduces the digitally generated signals almost distortion-free  even at high output levels and frequencies. The R&S AM300 thus meets re ...more

The Model 5000-16C 1000-watt FEL Lamp Standard provides absolute calibration of spectral irradiance from 250 nm to 2.5 microns. This tungsten-halogen lamp standard bears the ANSI designation of FEL. It has been selected by the National Institute of Standards and Technology to replace the 1000-watt, DXW standard ...more

This test station combines a solar cell I-V tester with a spectral response measurement system. The two systems share a sample mounting stage, contacting system, and computer—reducing system cost. Cells need to be mounted only once for both quantum efficiency and current-voltage measurements, however these measurements can not be made simultaneousl ...more

The J50 provides a nearly flat spectral response from UV to Far IR due to the absorptive black organic coating. The J50HR utilizes a partially absorptive metallic coating. This results in faster heat transfer and significantly decreases the time constant, allowing these models to be used iat very high pulse repetition rates. Sensors with an LP ...more

The DS345 is a full featured 30 MHz synthesized function generator. Using an innovative Direct Digital Synthesis (DDS) architecture, the DS345 provides outputs of high spectral purity, outstanding frequency and phase agility, and remarkably versatile modulation and arbitrary waveform capability. ...more

LabSpec 5000 / 5100 series?the latest in truly portable post-dispersive ultra-rugged spectrometers. The LabSpec 5000 / 5100 series incorporates the benchmark power of the award winning LabSpec® Pro?s broad spectral range (350-2500 nm) and combines it with Ethernet and optional wireless functionality, as well as expanded temperature operating pa ...more

* Wide range for measurements as high as 40000 lux and 4000 fc. * 0.01 lux and 0.001 fc resolution for accurate low light level measurements. * Light sensor cover is included for preserving sensor life. * Auto off function. * Data hold and peak hold function. * Low battery indication. * Over range indication. * Auto-ranged. * Calibration mode ...more

Portable spectroradiometer MS-720 is developed to measure the spectral irradiance in the range from Visible to Near-Infrared region. MS-720 is mainly used for the data acquisition for Geological features, Vegetation, Oceanography, Remote sensing and others. ...more