|Sponsor Your Catalog|
CAST-2000 - GPS Simulation System The CAST-2000 assists in the development and verification/validation of navigation systems for virtually all applications. It simulates up to 16 GPS SVs of C/A, P code and M-noise on L1 and L2. The system is fully upgradeable to perform hardware-in-the-loop simulations, analyze anti-jam performance, conduct security testing with Y Code, SAASM and M-code, and for 3-D visualization of the surrounding terrain.
Automotive Supply Simulation System The modularly constructed Automotive Supply Simulation System is a compact EMC-Test System for the execution of immunity measurements for pulse-shaped, line conducted disturbances at electronic equipment of motor vehicles. The high performance version enables tests of current-intense consumers or even complete vehicles
RTS - Open-Architecture Real-Time System for Hardware-in-the-Loop Simulation The RTS is a high-performance, standards-based, open-architecture real-time system for hardware-in-the-loop simulation, controller prototyping, and test applications. The RTS is a VME based solution that features PowerPC VME single board computers (SBCs) for the primary computational power. A wide range of VME, PMC, and IP off-the-shelf I/O interface cards may be used to customize each RTS real-time system.
SNAsim - SNA Host Simulation System SNAsim is a powerful SNA 3270/5250 testing and traffic generation tool. It provides a PC-based environment for simulating the 3270 and 5250 data streams produced by IBM Mainframes using SDLC, Token Ring, and Ethernet connections. Ready-to-run tests are provided for: protocol conformance, functionality, load/stress, and host application emulation. A scripting facility is available to create additional tests.
MP3000-C - Relay protection test and simulation system High accuracy: 0.1% from 50mA to 30A, High efficiency due to the load adapting feature. Current backup: the three fully independent three phase current sources ensure the backup of redundant three phase current system.
Avionics Supply Simulation System Simulation of voltage variations. Simulation of frequency variations. Creation of practical disruptions
Solar Simulation Systems A Solar Simulation system also known as sun simulator reproduces full spectrum light equal to natural sunlight. The ground level spectrum of natural sunlight is different for various locations on earth. The constituents of the atmosphere affect both absorption and scattering. Elevation is another factor that affects the ground level spectrum, since the elevation determines how far the sun's radiation must pass through the atmosphere.
CAST-1000 - GPS Simulation System The CAST-1000 creates a GPS RF environment for developing, integrating and testing GPS receivers in the laboratory or in the field. The system simulates GPS for up to 16 L1 and L2, C/A and P code satellites (SVs). It includes individual SV power level adjustment and allows full control of the 300 bit navigation message.
SimulationX - System Simulation Software Not only does it cover more physical domains than the competition including the all-new new libraries for acoustics and electric power. It is also the sheer endless possibilities of this utterly flexible tool to integrate with virtually any development environment through various interfaces, add-ins and export functionalities.
PSCAD - Power Systems Simulation Software SCAD is a fast, accurate and easy-to-use power system simulator for the design and analysis of all types of power systems. For power quality studies, fault analysis and power planning, PSCAD improves your system’s performance and reliability. PSCAD is ideal for the analysis of electrical transients involving: Power lines and cables. Large non-linear industrial loads. Transformers with saturation. Power electronic systems & drives. Asymmetrical faults. FACTS/HVDC systems. Protection relay coordination. Arc furnace flicker. Distributed power generation. Rotating machines. Embedded systems, etc...
rtX - Real-time System for Hardware-in-the-Loop Simulation The rtX is a high-performance, standards-based, open-architecture real-time system for hardware-in-the-loop simulation, controller prototyping, and test applications. The rtX features the latest Intel multi-core processors for the primary computational power. A wide range of PCI, PXI, PCIe, and other off-the-shelf I/O interface cards may be used to customize each rtX real-time system.
TelSim - Real-time Telemetry Simulation System Fully integrated simulation environment that can model the continuous or discrete time behavior of any external system. Simple user-friendly operation makes TelSim ideal for supporting all phases of testing and training.
Simulation Systems Engineered for extremely realistic testing, these systems enable you to accurately and repeatably simulate the operating environments for a wide range of structures — from automobiles and commercial aircraft to bridge piers and the human spine — all within the controlled test lab.
Solar Simulation Systems Whether in a hot dry desert, warm and humid subtropical climate or in the extreme alpine regions, a car has to function. A car is a distinct representative of products that have to with-stand various types of continuously changing environmental conditions. K.H.Steuernagel (KHS) SolarConstant solar simulation systems provides effective solar energy to meet the testing needs of the automotive community.
Nexus8610 - Traffic Simulation System Typically, the Nexus8610 Traffic Simulation System is used by network element manufacturers as well as network operators in order to verify equipment specifications under varying conditions.
MP3000-A/B - Relay protection test and simulation system High accuracy: 0.1% ranging from 50mA to 30A. High efficiency due to the load adapting feature. Current backup: the two fully independent three phase current sources ensure the backup of three phase current system. Voltage backup (type B): the two fully independent four phase voltage sources ensure the backup of the voltage outputs.
Simulation System Simulation of voltage variations. Simulation of frequency variations. Creation of practical disruptions
ETS-7637 - Automotive supply simulation system With automobile operation and safety increasingly dependent on reliable functioning of complex control and monitoring systems, the electromagnetic compatibility (EMC) of automobile electrical and electronic equipments become more important.
WRSS - Weather Radar Simulation System Rockwell Collins offers a full line of economical PC-based Weather Radar Simulation Systems (WRSS), suitable for a wide variety of military and commercial aircraft simulation applications. The WRSS incorporates our Digital Radar Landmass Simulator (DRLMS), accurately simulating real-world terrain and cultural feature returns, weather patterns, windshear and other effects. All systems can be customized for each application. Our systems support a variety of video interfaces for use with either actual or simulated aircraft displays.
NSS - Network Simulation System Corning Cable Systems Optical Network Simulation Systems are designed with the end-user in mind. Conveniently packaged in an easy-to-mount cabinet or small, handheld boxes, the systems are compact and provide excellent protection for the stored optical fibe
GSIM - Simulation Systems The GSIM avionics IO platform builds on The Goebel Company ʼ s long history in computer architecture and realtime simulation. Weather your IO requirements are simply driving a cluster of displays, or driving a full complement of avionics IO, GSIM has the solution for you. GSIM provides the highest IO count in single chassis rack mount or desktop configurations. GSIM configurations are delivered with Linux Real-time systems.
Avionics Test & Simulation PXI Systems Fully integrated high-channel density Avionics Test & Simulation PXI systems for LabVIEW® applications. The AIT Avionics Test & Simulation PXI systems feature fully integrated high-channel density avionics data bus test and simulation systems for Fibre Channel, MIL-STD-1553, ARINC 429, and ARINC 664 using AIT's industry-leading PXI and PXI Express avionics interface modules with LabVIEW® certified device drivers.
MICROMAGUS - SIMULATION OF THIN FILM SINGLE AND MULTILAYER SYSTEMS MicroMagus was designed for use by research scientists and engineers involved in the fundamental and applied research on thin film magnetic multi layers and devices based on such multi layers (typical examples are MRAM cells and XMR sensors).
TEST-2101 - SWITCH AND CONTROL UNIT SIMULATION SYSTEM IBKU TEST-2101 system is intended for generation, measurement and control of electrical parameters during control objects testing and for registration and monitoring of measurements and testing results.
Results 1 - 24 of 81
Simulation - The approximation of actual operational conditions.
- Systems x
- Electromagnetic Simulation
- Environmental Simulation
- Simulation Software
- Analysis (10)
- Computer (7)
- Control (15)
- Current (7)
- Data (9)
- Development (10)
- Instruments (7)
- Interfaces (13)
- Network (7)
- Power (10)
- Protection Relay (7)
- Relay (8)
- Simulation Testing (14)
- Software (19)
- Standards (9)
- Test (15)
- Test Systems (26)
- Testing (20)
- Time (18)
- Vehicle (8)
- »See All 369 Features