Serial I/O

Serial to Parallel Interface board with 40 Digital I/O Lines and RS-232 or RS-422/RS-485 serial inerface. Small 4.5 x 5.5 inch (114 x 140 mm) Board - Connector down version mates with 4804 Relay Driver Board. ...more

Serial Data Acquisition and Control Board. Provides Analog I/O, Digital I/O, Relay Driver Outputs and Temperature Measurements. RS-232, RS-422 and RS-485 Serial I/O includes network address and network packet modes. ...more

The D1700 series modules allow a single host computer to control thousands of I/O points from one serial port. The digital inputs accept a wide signal level input, up to +30Vdc without damage, and have TTL logic input switching levels.  ...more

Stop wondering what's happening with your LabVIEW RT application. Know for certain with a ViewPort display. Easy-to-use ViewPort serial LCD or VFD displays give your LabVIEW applications a link to the outside world. Enabling them to get info out - from simple system status to up-to-the-second I/O status. ...more

The PMC451 is a PMC FPGA-based 16/24 channel serial card with front and rear I/O. The standard configuration consists of a PCI-core and sixteen (UART16) or twentyfour (UART24) 16C550-uart compatible cores. The PMC451 has a software configurable physical interface. This card offers the user the possibility to create a combination of RS232 and RS ...more

The FPE650 is a quad FPGA processor card which combines high performance and high bandwidth I/O in a flexible format. Provided in a 6U VPX (ANSI VITA 46) format, the FPE650 has a large number of multi-Gigabit/sec serial and parallel data links to the backplane as well as FMC (VITA 57) mezzanine sites for direct I/O to the FPGAs without introducing ...more

The PMC450 is a FPGA-based 8 channel RS422 serial card with front and rear I/O. The standard configuration consists of a PCI-core and eight 16C550-uart compatible cores. With the 32 onboard RS422 transceivers 8 serial RS422 channels (Rx, Tx, RTS and CTS) are created. The PMC450 features a 68-pin high dense connector at the front for the connect ...more

Designed for the TS-PMC processor, the LVDS Micro Mezzanine module provides 16 input and 16 output high speed serial connections to the FPGA processor. This micro mezzanine board can be ordered as part of the TS-PMC General Purpose Development Kit - delivering a complete integrated I/O, FPGA processing and software development environment ...more

The Pentek Model 4256 is a high-performance RS-232 serial interface compatible with the Intel Multibus II MIX Module Design Specification for a MIX Slave device. This standard is employed by the Pentek Mode1 4283 VMEbus DSP card as an expansion bus interface. RS-232C Serial I/O & XDS Adapter ...more

The PMC451 is a PMC FPGA-based 16/24 channel serial card with front and rear I/O. The standard configuration consists of a PCI-core and sixteen (UART16) or twentyfour (UART24) 16C550-uart compatible cores. The PMC451 has a software configurable physical interface. This card offers the user the possibility to create a combination of RS232 and RS ...more

The MM-15x0 is a 6U VXS Intelligent I/O Carrier with dual user programmable Xilinx Virtex-4 SX55 or LX160 FPGAs, dual System-on-Chip System Controllers, dual XMC / PMC sites and dual x4 Serial RapidIO ports on P0. ...more

A 3U CompactPCI Intel Pentium M single board computer with dual Gigabit Ethernet channels, the CL9 supports single or double slot front I/O. It can be equipped with up to 1GB of DDR SDRAM. Onboard EIDE and two serial ATA interfaces on the rear are available for mass storage. ...more

The RF310M Modem provides the communication interface between one of our dataloggers and a Maxon radio. The modem is typically powered by the 5 V power supply from the datalogger's serial I/O port. ...more

The DIG OMNIBUS module provides 32-bit digital I/O and two serial ports. This module is commonly used for sensing digital inputs and as control bits for industrial process equipment.  ...more

The MYRIAD -3785 Common Data Link Router/Synchronizer combines I/O routing and synchronizer/formatting functions on a commercial-grade, single-slot 6U by 160 mm VME board. Performing any-to-any routing of high- and low-rate serial data streams and CDL synchronization channels, the MYRIAD-3785 can act as the front end for common data link (CDL) ...more

For expansion, our ECU-in-the-loop simulation hardware easily accommodates new I/O types and additional channels. For testing higher levels of integration, such as a chassis/powertrain combination, multiple TestDrives can be brought together through the built-in SignalWire real-time serial link. In addition to its capability as a standalone tester, ...more

The Serial I/O module is an open-platform for implementing custom digital interfaces and hardware-assisted processing between the DSP on the host board (Modular or Solomente Series DSP board) and external hardware ...more

The PMC450 is a FPGA-based 8 channel RS422 serial card with front and rear I/O. The standard configuration consists of a PCI-core and eight 16C550-uart compatible cores. With the 32 onboard RS422 transceivers 8 serial RS422 channels (Rx, Tx, RTS and CTS) are created. The PMC450 features a 68-pin high dense connector at the front for the connect ...more

VP7 is a 6U Intel Pentium III or Celeron Processor VMEbus embedded computer. Features low power mobile CPUs from 500 to 1000MHz. The VP7 has front and rear I/O, up to 512MB SDRAM and 10/100 Mbit Fast Ethernet. LCD interface and extended temperature range of up to -40?C to +70?C. Four serial channels, parallel port and two USB ports ...more

Relio Solid State Computers Inordinate Reliability and Consistency Designed for the OEM, the Relio series of embedded I/O servers combines the reliability of a PLC with the versatility of an industrial computer. Relio systems use no moving parts. Notoriously unreliable hard drives and fans are not needed. Choose from 933MHz Low Voltage Pentium ...more

The Data I/O Serial Number Server, when combined with existing Flash-CORE programming systems, provides a complete solution that manages automatic programming of unique numbers or other dynamic data from your external source file during the production programming process. ...more

Sealevel's serial and digital PCI bus boards offer the widest choice of I/O connectivity available. Serial products include RS-232, RS-422 and RS-485 solutions. Our PCI digital I/O boards are available with a wide range of accessories to make installation easy. ...more

4 encoder inputs at 30 MHz (post-quadrature). User and system memory 512 KB each. Optional analog input module available, including eight 12- or 16-bit inputs. Optional communication module available, including 2 serial and 1 parallel port. Onboard 48 TTL I/O with industry standard Opto 22, 50-pin connectors. ...more

This board interfaces industry-standard Industrial I/O Pack (IP) modules to a PCI bus on a PC-based computer system. Five IP module slots give you the freedom to mix a variety of I/O functions (A/D, D/A, digital in, digital out, serial I/O, etc.) on a single board. Or, combine modules of the same type for hundreds of channels on a single card. ...more

IP512 Industrial I/O Pack (IP) modules provide an isolated, high-performance serial communication interface for your computer. Large FIFO buffers on the transmit and receive lines of each serial port enable more efficient data processing. When the buffer is full, an interrupt is sent to the CPU to read the data. To  ...more