Scanners

Beetle is a handheld, low-cost wireless receiver designed specifically for installing and maintaining Local Area Networks. The instrument measures coverage of direct sequence CDMA IEEE 802.11b networks. Beetle measures and displays signal strength of ALL APs (Access Points) on ALL 14 DSSS channels as well as PERs (Packet Error Rates), SSID and ...more

The Raven is a portable, PN scanner used to measure and record (Ec/Io) IS-95 coverage of CDMA base stations. Raven measures active CDMA networks or it may be used in conjunction with CDMA transmitters such as the Crocodile? or Gecko? which are placed throughout an area of interest. The transmitters may be set to different base station PN offse ...more

The Condor is a portable, PN scanner used to measure and record coverage (Ec/Io) of IS-95B and CDMA 2000 base stations. Condor measures active 1XRTT networks operating in BOTH PCS and Cellular frequencies using a precision dual band receiver. CDMA transmitters such as Berkeleys Crocodile or Gecko may be set to different base station PN offsets ...more

The Cardinal is a handheld, Dual Band (both PCS and Cellular) PN scanner ideally suited for indoor microcell IS-95B 1XRTT CDMA 2000 analysis. High speed architecture measures, stores and reports all 512 PN offsets in less than a second. Data can be downloaded and displayed in realtime on any laptop PC via the built-in RS-232 port. The Cardinal ...more

Modules cover digital, rf, microwave, optical, power and special switching applications. All units are fully VXI compatible and each product is supplied with a Plug&Play software driver. The 3000 Series VXI modules support a bandwidth from DC to 26.5GHz. ...more

The Model 7053 has ten channels and features 5A contacts. The switching is designed to maintain current paths for signals not connected to the output or, when internal jumpers are removed, to provide high input resistance for making voltage measurements. Semiconductor testing, materials research, power supply testing, solar cell measurements, ...more

The AutoXray EZ-Scan AX4000 (Part# AX4000) is an OBD-II scanner which includes all OBD-II protocols, including the newly released Controller Area Network (CAN) protocol, allowing for more capability and flexibility to manage the diagnostic process. The CAN protocol is currently being used in a variety of vehicles and will be the mandated proto ...more

The AutoXray EZ-Scan AX6000 (Part # AX6000) is an OBD-I and OBD-II scanner which includes all OBD-II protocols, including the newly released Controller Area Network [CAN] protocol. The tool has the added benefit to display selected enhanced codes and vehicle data for GM, Ford, Chrysler and Toyota. The CAN protocol is currently being used in a ...more

A  bold step forward in DIY diagnostics! The SUPER AutoScanner allows the user to easily retrieve and read OBD II trouble codes and display/read live vehicle data for a faster diagnosis. This sophisticated yet extremely user-friendly tool can be used on OBD II compliant cars and light trucks (foreign and domestic) sold in the U.S. from 1996 to ...more

The OTC Code Scanner is an ergonomically designed multi-function code scanner that retrieves GM, Ford and Chrysler OBD I and all generic OBD II diagnostic trouble codes for all 1996 to 2006 foreign and domestic OBD II compliant vehicles as well as display selected enhanced codes for GM, Ford, Chrysler and Toyota and certain manufacturer's spec ...more

The 160B Opt.3 and 320B Opt.3 Low Thermal Guarded Scanners are designed to improve accuracy in high resistance measurements. Unguarded, the Data Proof scanners have leakages of about 1012 W which can cause errors of a few tenths of a ppm when measuring 1 MW. Guarding greatly reduces the errors allowing excellent accuracy up to the 1 0GW level. ...more

The Falcon is a flexible and economical real-time PN scanner systems suitable for identifying pilot signals for any and all IS-95A base stations. The system includes an internal high stability time base that is disciplined by an internal GPS receiver. The Falcon outputs data via serial port connection to a laptop PC, and weighs less than 5 pou ...more

32 differential or 64 single-ended channel scanner or multiplexer that plugs directly into an ISA slot of a Personal computer. ...more

Data Proof Low Thermal Scanners with extremely low thermal offsets are ideal for automating precision measurements to sub-ppm accuracy. This versatile dual scanner has two pairs of output lines which makes it suitable for a wide variety of uses. It can be used for comparing voltage reference standards, as well as four-terminal measurements on r ...more

The iVS-3/600P Scanner uses a sophisticated digital signal processor that enables the unit to calculate and display all power values without requiring a PC. The field technician or engineer can easily display the data in the field and take immediate corrective action. The iVS-3/600P Scanner is designed for rugged outdoor use and weighs just ove ...more

IDE has a broad product line of robotics and isolation. More and more, they are used in systems where we see a combination of these products. All different kinds of robots and accessories like XY-stages, prealigners, scanners etc. can be connected to a host PC or to each other. ...more

The ViP+ scanner uses a sophisticated digital signal processor that enables the unit to calculate and display all power and harmonic values without requiring a personal computer. The field technician or engineer can easily display the data in the field and take immediate corrective action. The ViP+ Scanner is designed for rugged outdoor use and ...more

The Skyscan 1076 is a low dose in-vivo x-ray micro-CT scanner for slice imaging and 3D image reconstruction from small animals such as mice and rats. The images have pixel sizes as fine as 9 microns.  The Micro CT technique is non-invasive and can capture a cross-section up to 17 mm in length along any region of the specimen. The data can ...more

The Model 4220A/30 was designed to be used in automated resistance and shunt measurement applications where a number of artifacts needed to be calibrated efficiently and accurately. ...more

The GX6264 is a 64 differential or 128 single-ended channel scanner or multiplexer that plugs directly into an PXI or CompactPCI backplane. The GX6264 provides either differential or single-ended scanning capability, configurable via software commands or DIP switches. ...more

Ever Tech embarked into Lasermark systems in 1996 & today we are recognised as a market leader for our innovative designs & hi-speed features. We integrate our Lasermark systems with the key laser suppliers (eg. Lumonics, RS, EO-Technics, General Scanner, Baasel). ...more

The Skyscan 1076 is a low dose in-vivo x-ray micro-CT scanner for slice imaging and 3D image reconstruction from small animals such as mice and rats. The images have pixel sizes as fine as 9 microns.  The Micro CT technique is non-invasive and can capture a cross-section up to 17 mm in length along any region of the specimen. The data can ...more

The MI Technologies? MI-4190 Family of Position Controllers offers solutions for nearly every motion control application - from precision placement and rotation of tools, targets or instruments in laboratories, test facilities or remote field locations to complex multi-axis positioners and scanners. MI Technologies offers a broad array of produ ...more

The SR200 Gate Scanner module is designed to automate waveform recovery with the SR250 and SR255 Gated Integrator modules. Waveform recovery is done by slowly scanning the gate of the integrator over the waveform of interest.  ...more

The GT6041/6042 are high-density switching cards that provide 200 MHz bandwidth. The GT6042A has four groups of 1x4 multiplexer scanners; the GT6041B/6042B have eight groups of 1x4 multiplexer scanners. The GT6041B/6042B's eight groups of multiplexer scanners can be software configured to provide switch paths that maintain 200 MHz bandwidth. ...more