SRAM

VP480 Universal Programmer Features: Dimensions: 168×108×26mm, weight: 300g 48 Pin ZIF socket with universal pin-drivers. Supports more than 16000+ devices Interface with any laptop, PC, PS/2 or compatibles through USB port. Accepts standard file formats: JEDEC, INTEL (Extended) HEX, Motorola S record Manages 16 and 32-bit word split (Set Prog ...more

GAO USB Universal Device Programmer supports from 4000+ to 22000+ devices to meet your different needs for device programming or IC testing. Check out the device support list of our universal programmer to match the chip you want to program or the adapter you may need. Interface with any laptop, PC, PS/2 or compatibles through USB port or prin ...more

GAO USB Universal Device Programmer supports from 4000+ to 22000+ devices to meet your different needs for device programming or IC testing. Check out the device support list of our universal programmer to match the chip you want to program or the adapter you may need. ...more

FlexROM emulators provide engineers with a flexible development tool for any Embedded project that uses an external FLASH, EPROM or SRAM device. FlexROM provides quick, in-circuit firmware test cycles during development. ...more

The X5-210M is an XMC IO module featuring four 14-bit 210 MSPS A/Ds with a Virtex5 FPGA computing core, DRAM and SRAM memory, and eight lane PCI Express host interface. ...more

The CR23X is a self-contained, rugged datalogger that can measure most sensor types directly, communicate via modems, reduce data, control external devices, and store both data and programs in either non-volatile Flash memory or battery-backed SRAM.  ...more

ArraytestMaker is an advanced embedded test, diagnosis and repair solution for SRAM, CAM and DRAM. ArraytestMaker prevents ICs containing faulty SRAM from reaching systems. The user can select one of five algorithms that are built-into ArraytestMaker. ...more

The PCI-400-2 carrier board is a high performance, multiprotocol PCI solution to your communication requirements, supporting up to two 8/32MHz Industry Pack (IPack) modules. This new generation of intelligent carrier boards is powered by a StrongArm 200MHz RISC processor and comes with 2MB of SRAM and 16MB of shared memory, expandable to 64MB, ...more

The AD-48ADM16 offers a mix of up to 48 single ended or 24 differential multiplexed analog input channels. Each channel features programmable gain and can be individually programmed as singleended or differential. The acquisition can be started by the host or by an on board sequencer that uses a channel list ...more

The VME-400 carrier board is a high performance, multiprotocol VME 6U solution to your communication requirements, supporting up to four 8/32MHz Industry Pack (IPack) modules. This new generation of intelligent carrier boards is powered by a StrongArm 200MHz RISC processor and comes with 2 MB of SRAM and 16 or 64 MB of shared memory, permitting ...more

The ProDAQ 3550 Fast Digital-to-Analog Converter & Arbitrary Waveform Genera-tor Function Card provides two channels per card, each equiped with a 16-bit, fast and precision Digital-to-Analog Converter, 2-pole analog filter and 256k x 16 SRAM memory per channel.  ...more

LogicVision’s ETSystemMemory provides a complete solution for the at-speed testing of component memories. The solution provides support for most SRAM and DRAM memories, including those that utilize burst modes of operations, such as DDR and QDR memories. ...more

The PCI-FLASH2 board has up to 64 Mbytes of on-board FLASH memory. The board also provides 512 Kbytes of battery-backed static RAM (non-volatile memory with a 10-year battery life). Typical uses include code storage, look-up tables, calibration data, and data logging. The PCI-FLASH64 board is designed to work with any VME single-board computer ...more

The CPCI-400 carrier board is a high performance, multiprotocol CompactPCI 6U solution to your communication requirements, supporting up to four 8/32MHz Industry Pack (IPack) modules. This new generation of intelligent carrier boards is powered by a StrongArm 200MHz RISC processor and comes with 2MB of SRAM and 16 or 32 MB of shared memory, p ...more

The ATC-ALTERA is a user programmable FPGA with memory single wide Industry Pack module. There is a ALTERA 10K series FPGA and 512 kilo Bytes of external SRAM that can be accessed directly via the Industry Pack interface. The Industry Pack interface is decoded prior the ALTERA, so that the application has complete use of the ALTE ...more

The PXI-400 carrier board is a high performance, multiprotocol PXI solution to your communication requirements, supporting up to two 8/32MHz Industry Pack (IPack) modules. This new generation of intelligent carrier boards is powered by a StrongArm 200MHz RISC processor and comes with 2 MB of SRAM and 16 or 64 MB of shared memory, permitting it ...more

Cyclone II FPGA (EP2C35F672) LVDS or RS-485 or serial multiprotocol transceivers) Two universal serial controllers (Z16C32) with built in DMA) 512MByte SRAM (for data FIFOs)) 8 external PLLs to allow for at least 8 independent channels). Connections to allow for a daughterboard for changing transceivers, adding logic, etc) 68pin SCSI-3 connecto ...more

Managing yield for todays giga-scale DRAM, SRAM and FLASH memory devices is a complex activity. Huge volumes of test and fabrication data from multiple sources must be gathered, correlated and analyzed with a short turnaround time. Out of spec conditions must be flagged and reported automatically when discovered ...more

Altera 10K20, 10K30, 10K40, 10K70, 512kbyte SRAM 48 I/O ...more

The PCI-400 carrier board is a high performance, multiprotocol PCI solution to your communication requirements, supporting up to four 8/32MHz Industry Pack (IPack) modules. This new generation of intelligent carrier boards is powered by a StrongArm 200MHz RISC processor and comes with 2 MB of SRAM and 16 or 32 MB of shared memory, permitting i ...more

At KYEC we offer excellent own brand burn-in oven, for burn in services covering Monitoring Burn-In(MBI), Dynamic Burn-In (DBI) and Testing During Burn-In (TDBI). Our burn-in services cover most of the products and packages including EDODRAM, SDRAM, SGRAM, SRAM, DDR, Flash, Memory Cards, EPROM, Embedded Memory, SIP, SOC's and ASIC's. Our specia ...more

LogicVision?s ETSystemMemory provides a complete solution for the at-speed testing of component memories. The solution provides support for most SRAM and DRAM memories, including those that utilize burst modes of operations, such as DDR and QDR memories.  ...more

The PNV8 is an industry-standard PMC module featuring up to 16 MB of non-volatile, battery backed SRAM. When data retention is critical, the PNV8 can provide up to 45 days of data storage if main power is lost, or the board is removed from its power source.  ...more

Model 104-DA12-8A is a PC104 board featuring eight independent 12-bit digital-to-analog converters (DACs) and broadly configurable arbitrary waveform generation (ARB) capabilities. Other convenient features include 128K SRAM for waveform data storage, eight 4-20mA current sinks, three 16-bit counter/timers and fused general-purpose +5V and +12 ...more

Available in PMC/PCI/CPCI form factors. Quad or Dual 14-bit A/D Converters. Xilinx Virtex-4 LX or SX FPGA. 24 Mbytes of QDR SRAM in three banks. AC or DC Coupled Analog Inputs  ...more