SDRAM

BittWares Hammerhead-Lite-PCI (HLPC) board provides high-performance DSP at a low cost. The PCI short card incorporates four low-cost 100 MHz ADSP-21161 SHARC DSPs, a 32-bit 33 MHz PCI interface, and expansive memory, including 64 MB SDRAM, 512 KW SBSRAM, and up to 8 MB Flash memory. The board also features a variety of I/O interface options, ...more

BittWare's Danube 6-PaC PCI (D6PC) board features the processing power of six Analog Devices ADSP-TS201S TigerSHARC DSPs running at up to 600 MHz for a total of 21.6 GFLOPS. The board also integrates a Xilinx Virtex-II Pro? FPGA, BittWare's SharcFIN? PCI bridge, up to 512 MB of SDRAM, and two PMC sites - combining tremendous power with flexibi ...more

The Hammerhead-PMC+ (HHPM) packs the processing power of four ADSP-21160 SHARC DSPs and the speed of a 64-bit, 66 MHz PCI interface onto a single-width PMC module. You can use the Hammerhead-PMC+ to add I/O or additional processors and memory on any standard PMC or PMC+ capable carrier board. The board also features 64-256 MB of SDRAM for gene ...more

BittWares Hammerhead-PC/104-Plus (HHP4) board packs the lightning-fast processing power of two ADSP-21160 SHARC DSPs and the speed of a 32-bit, 33 MHz PCI interface onto a PC/104-Plus format card. Up to 64-256 MB SDRAM is available to both processors for general-purpose code and data storage, and 2 MB of FLASH memory is available on an 8-bit p ...more

2-CH 65 MS/s 14-Bit Digitizer with SDRAM ...more

BittWare’s GT-6U-VME (GTV6) is a rugged 6U VME/VXS (VITA 41) board, designed for demanding multiprocessor-based applications. The hybrid processing architecture takes advantage of both FPGA and DSP technology to provide a complete solution for applications requiring flexibility and adaptability along with high-end signal processing. The board featu ...more

The PCI_LVDS_8R has 8 channels of LVDS input. The channels are grouped two per Filter Xilinx. The input data is filtered, then written to the Input FIFO. There is one Input FIFO per LVDS channel. 1K x 32. One Latch Xilinx handles 4 LVDS channels. The data is read from the Input FIFO by the Latch Xilinx and either written to the SDRAM or the Ou ...more

The PCI_LVDS_8R has 8 channels of LVDS input. The channels are grouped two per Filter Xilinx. The input data is filtered, then written to the Input FIFO. There is one Input FIFO per LVDS channel. 1K x 32. One Latch Xilinx handles 4 LVDS channels. The data is read from the Input FIFO by the Latch Xilinx and either written to the SDRAM or the Ou ...more

The SFIN-160 SharcFIN features a set of bus interfaces and peripherals for the ADSP-21160 SHARC DSPs. It integrates a full-featured SDRAM controller, a full 64-bit, 66 MHz master PCI interface, a peripheral bus that interfaces the DSPs to peripherals such as Flash memory, and an extensive flag and interrupt multiplexer ...more

BittWares Hammerhead-3U-cPCI (HH3U) packs the processing power of four ADSP-21160 SHARC DSPs and the speed of a 66 MHz PCI interface on a 3U CompactPCI board. The board also features 64-256 MB of SDRAM, 2 MB of FLASH RAM, and a PMC+ site. ...more

BittWares Hammerhead-6U-cPCI (HH6U) board packs the processing power of eight ADSP-21160 SHARC DSPs and the speed of a 64-bit, 66 MHz PCI interface on a rugged 6U CompactPCI board. Along with the eight Analog Devices ADSP-21160 processors, the board also features three banks of SDRAM, two 2 MB banks of FLASH memory, and two PMC+ sites. ...more

BittWares Tiger-6U-cPCI (TS6U) board features the processing power of eight 250 MHz TigerSHARC (ADSP-TS101S) DSPs from Analog Devices. The 6U CompactPCI board incorporates a 64-bit 66 MHz PCI interface and shared memory, including three banks of up to 256 MB SDRAM and two 8 MB banks of Flash. It also features a variety of I/O interfaces, which ...more

2-CH 65MS/s 14-Bit Digitizer with SDRAM ...more

BittWares Tiger-PCI (TSPC) board features the processing power of four 250 MHz Analog Devices ADSP-TS101S TigerSHARC DSPs. The PCI board incorporates a 64-bit 66 MHz PCI interface and shared memory, including up to 256 MB SDRAM and 8 MB Flash. The board also features a variety of I/O interfaces, which include a PMC site and external link ports ...more

BittWares Tiger-PMC+ (TSPM) board features the processing power of four 250 MHz TigerSHARC (ADSP-TS101S) DSPs from Analog Devices. It incorporates a 64-bit 66 MHz PCI interface and shared memory, including a bank of up to 256 MB SDRAM and an 8 MB bank of Flash. A PMC+ format board, the TSPM attaches to any PMC capable carrier board and to Bitt ...more

BittWares Hammerhead-PCI (HHPC) board matches the lightning-fast processing power of the ADSP-21160 SHARC processor with a 64-bit, 66 MHz PCI interface. The board features four Analog Devices ADSP-21160 processors, 64-256 MB of SDRAM, 2 MB of FLASH memory, and two PMC mezzanine sites. ...more

A 6U CompactPCI, conduction cooled single board computer featuring the IBM PowerPC 750 processor running at speeds up to 500MHz, the CK3 uses 128 to 512MB of SDRAM, 32MB of flash memory and 512kB of boot flash. The CK3 also features two PMC slots, 10/100 Ethernet, two serial ports, a parallel port, an IDE port, real-time clock and a watchdog t ...more

This processor PMC (prPMC), with its 750CXe PowerPC, offers an unprecedented level of modularity, scalability and flexibility to the SBS Palomar line of high-performance prPMCs. Ideal for high-performance, low-power systems such as edge access devices and network storage servers, Palomar 500 features a low-profile 144-pin SO-DIMM socket that s ...more

Vertical Contact Probe Cards are developed for multi-die probing with matrix configuration, high temperature probing (up to 150°C), C4 (array bumps) configuration, and high speed memory testing such as Rambus and SDRAM. ...more

The MM-6155D is a 2GB 64-bit 33MHz PMC SDRAM Memory Buffer node. The burst mode transfer peak rate is 264MB/s. ...more

The CR3 is a 3U CompactPCI conduction-cooled Single Board Computer driven by an Ultra Low Voltage Intel Celeron Processor. With 128MB SDRAM, dual 10/100 Mb Ethernet, dual RS-422 serial ports, dual USB ports, and IDE interface, the CR3 can function as a system controller or peripheral card. ...more

The MM-6165D is a 2GB or 4GB 64-bit 66MHz PMC SDRAM Memory Buffer node. The peak transfer rate is 533 MB/s. Memory on the PCI bus is mapped into I/O space, which easily creates a separate and distinct memory partition for buffering data, caching data, or storing application files. ...more

A 3U CompactPCI Intel Pentium M single board computer with dual Gigabit Ethernet channels, the CL9 supports single or double slot front I/O. It can be equipped with up to 1GB of DDR SDRAM. Onboard EIDE and two serial ATA interfaces on the rear are available for mass storage. ...more

A 6U VME PowerPC CPU board with flexible DDR SDRAM and flash configurations and an array of on-board peripherals, all in a single slot. Up to two Gigabit and two 10/100Mbit Ethernet ports, up to four high speed multi-protocol serial controllers (HDLC, Bisync,..) one serial ATA port, two PMC expansion slots, UARTS, timer/counter and general pur ...more

VR7 is a 6U VMEBus Intel Pentium III and Celeron Processor up to 850MHz VMEbus embedded computer. Up to 512MB SDRAM with ECC. Optional conduction cooling with extended temperature range of up to -40°C to +70°C. VGA/LCD up to 1600 x 1200 video. Fast Ethernet 10/100Mbit. Four serial channels, two parallel ports, PMC slot and two USB ports. Optio ...more