RF Sensors

Coaxial Dynamics "Standard" line of RF Power Sensors provide DC currents proportional to the forward and reflected power flowing through the line. All models are designed to drive a 30µA, 1400-Ohm meter, or provide approximately 100 millivolts across a 5K load. ...more

The BSP-901 RF Sensor employs a radio frequency (RF) power loss technique that operates at 2 Megahertz. The Sensor projects an RF field into the sample and measures the loss or change in RF dielectric constant as affected by moisture. ...more

Multi-sensor RF/DC power and SWR display with graphics you can control. Observe peak and average forward/reflected power and SWR simultaneously on four remote sensors. Sensors available for 160-6m and 140-470MHz. Provides Audio/Voice announcement of RF Power and SWR with single keystrokes. Also provides audio and visual announcement of SWR ala ...more

The OEM SV sensor is a calibrated sensor with electronic board set, which can be configured to meet specific spatial requirements. Optionally, other elements can be provided. For example, previous contracts have included the inclusion of an RF enclosure to ensure other high-frequency electronics do not interfere with sensor readings. ...more

WaveNode now has available an HF sensor up to 8KW operation.   Same price as our standard 2KW sensor -- $60.00 each.   Choose either SO-239 (Silver-Teflon-Gold) or "N" type connector.  This sensor is suitable for use with linear amplifiers capable of > 2KW watts PEP output.   Plug compatible with our other sensors to give maximum ...more

The CEESIM family of simulators sets the world standard in RF simulation for use in development, test and evaluation (T&E), maintenance, and training support of airborne, land-based, shipboard, and space-based Electronic Warfare (EW) sensors, electronic countermeasure (ECM) systems, and electronic support measure (ESM) systems. CEESIM pro ...more

On-line PD measurements of air insulated and solid insulated switchgear have been made for around 30 years using TEV (Transient Earth Voltage) sensors connected to the earthed metalclad equipment (these are sometimes referred to as 'Capacitive Couplers'). The TEV sensor is a small Radio Frequency (RF) Aerial which can detect the high frequency PD p ...more

 Monitor 4 sensors simultaneously for peak, Average power and coax SWR. Direct USB 2.0 full speed interface. Backlit LCD display for stand-alone operation- Your PC is optional. Oscilloscope and Spectrum Analysis of the RF Modulation- Observe IM and "Splatter" frequency components realtime. Complete system includes (1) sensor, WN-2 un ...more

RLB-F is used to measure and display heat power in pipes. One household with one meter and one IC card for consumer. It is more advanced than RLB since it is prepaid and use RF card to activate meter. It consists of flow sensor, microprocessor and temperature sensors and prepaid programme. It also can be used to measure cold power if connect te ...more

The SMART II RF Sensor employs a radio frequency (RF) power loss technique that operates at 2 Megahertz. The Sensor projects an RF field into the sample and measures the loss or change in RF dielectric constant as affected by moisture. Thus, the System response is a measure of the total water in the RF field, which is directly related to the m ...more

The Arbiter Systems, Inc. Model 1096A Dual Type IV Power Meter is a standards-lab quality instrument based on a design of the USA National Institute of Standards and Technology (NIST). The Model 1096A is used with thermistor power sensors and an external digital voltmeter to make RF power measurements of the highest accuracy. ...more

A range of 17 Power Sensors available for use with 6200B MTS, 6960B, CPM and 6970 Power Meters. Power levels from -70 dBm (100 pW) to +44dBm (25W). Low VSWR reduces measurement uncertainty ...more

The CAST-3000 fully supports integration testing of GPS/INS navigation systems where the inertial sensor and GPS receiver are either tightly or ultra-tightly coupled. The system produces GPS RF signals coincident with simulated IMU sensor data that provide dynamic testing in the laboratory environment for military and government applications ...more

A range of 17 Power Sensors available for use with 6200B MTS, 6960B, CPM and 6970 Power Meters. Power levels from -70 dBm (100 pW) to +44dBm (25W). Low VSWR reduces measurement uncertainty ...more

The RCTS-007 Radio Communications Test Set is comprised of a TS-4317-1 with a J-4343A appliqué, and RPM-007 and a PS-001 power supply, used primarily by the U.S. Marine Corp for testing elements of the Tactical Remote Sensor System (TRSS). Elements currently supported are the ICC, Pre-amp, RF Unit, Recovery Unit and Antenna Coupler. ...more

Small-size RF Power meter with power sensor. Allows tracking accurate I/P and O/P power over a range of power sensor. Ideal measurement of power transfer characteristics, I/P vs O/P power.  ...more

The 6970 RF Power Meter provides precision microwave power measurements in a hand portable battery powered package with a frequency range of 30 kHz to 46 GHz. A wide range of user features, including duty cycle, relative power measurements and limit checking, make the 6970 power meter highly versatile. The same wide range of power sensors used ...more

The CR510 dataloggers are a smaller version of our popular CR10X dataloggers. They provide a lower-cost datalogger alternative for measurements of a limited number of sensors, yet can be used with most of our telecommunication devices such as cellular telephones, RF UHF/VHF RF modems, and satellite transceivers. The CR510-series dataloggers us ...more

The CAST-4000 produces GPS RF signals to stimulate either tightly or loosely-coupled GPS/INS navigation systems. The system algorithms contain mature avionic sensor simulations for aiding. A strapdown Inertial Navigation System, Barometric Altimeter, Attitude Heading Reference System, Radar Altimeter and numerous auxiliary sensors are availabl ...more

A range of 17 Power Sensors available for use with 6200B MTS, 6960B, CPM and 6970 Power Meters. Power levels from -70 dBm (100 pW) to +44dBm (25W). Low VSWR reduces measurement uncertainty ...more

The ST124SMA series power sensor is a complete miniature RF & Microwave power meter. It contains a CPU which controls the sensor, processes the measurement results and operates the interface. All measurement data and settings can be transmitted via a USB interface to and from a PC. ...more

The "NEW" Industry Standard Hand-Held RF Power Meter, Easy To Operate & Field Ready. The Model 5000 must be coupled with Model 5010B Thruline Power Sensor or a Model 5011 Terminating Power Sensor.  ...more

The ST124SMA series power sensor is a complete miniature RF & Microwave power meter. It contains a CPU which controls the sensor, processes the measurement results and operates the interface. All measurement data and settings can be transmitted via a USB interface to and from a PC. Measurement range from –50 dBm to +20 dBm; Frequency range 10 MHz ...more

The 5230 series combines Boonton's technologies of RF Voltage and RF Power measurements in one instrument. The unit automatically senses the probe used to display power or voltage information. Existing Boonton power sensors and voltage probes can be used with this unit. ...more

TheTM-12 thermocouple thermometry system will monitor temperature at up to eight sites. Sensor inputs are RF shielded, and data from the sensors is sent via RS232 interface to a computer. This combination of filtering and fast, accurate transmission of data is designed specifically for modern hyperthermia systems. The TM-12 can be used with mic ...more