RF Matrix

CYTEC's VDX Series of Video and RF Switching Systems are based on a solid state switch fabric and are available in non blocking (any input to any output), full fan-out (any input to all outputs) configurations from 1x8 to 32x32, with bandpass to 200 MHz. The standard switch may be used as a 75 ohm Video or DS3/T3 Matrix. Input and output buffe ...more

8 x 9 RF Matrix Module suitable for switching frequencies to beyond 500MHz. The 50-725 is available in either 50 Ohm or 75 Ohm versions with a choice of coaxial connectors. It is intended for the easy construction of high performance bidirectional matrix switching systems. Automatic Isolation Switches are located on all coaxial connectors, the ...more

CYTEC's new 4600 Series are economical, high density, passive, bidirectional switch matrices. Single chassis system has -3dB bandpass of 30 MHZ. Each chassis holds up to 2048 two pole 2 GHz Type A relays, and a modular design allows great flexibility in creating different switching topologies. For example, the following single chassis configur ...more

CYTEC's TX Three Stage Switching Matrix for Video and RF Switching Systems are based on a solid state switch fabric and are available in non blocking (any input to any output), full fan-out (any input to all outputs) configurations from 16x16 to 128x128, with bandpass to 140 MHz. The standard switch may be used as either 50 ohm or 75 ohm Video ...more

The CXM Series are Computer Controlled Microwave Switching Systems for 50 ohm coaxial signals from DC to 40 GHz. A large variety of Microwave relays may be used to configure Matrix or Multiplexer configurations. Options include Latching or Fail safe relays; Unused input termination; SMA, N, TNC or other connectors; semi custom systems combinin ...more

Modules cover digital, rf, microwave, optical, power and special switching applications. All units are fully VXI compatible and each product is supplied with a Plug&Play software driver. The 3000 Series VXI modules support a bandwidth from DC to 26.5GHz. ...more

Signal Technology's Radio Frequency Switch Matrix Products are the pinnacles of performance for receiver front-end radio frequency switching. Many different frequency bands and ranges are available. These devices feature broadband frequency coverage and ultra wide dynamic (amplitude) range. Each unit's low noise floor and high intercept points allo ...more

The Symtx Microwave Switch Matrix Platform is configurable for frequencies from DC to 50 GHz, and is available in coaxial and wave-guide formats. Applications for this Microwave Switch Matrix Platform include microwave test systems for satellite and ground station testing, wireless, broadband and cellular applications, medical and industrial produc ...more

The MATRIX Model HD-500 is a detector-amplifier designed to demodulate the low frequency amplitude modulations on any RF carrier over the range of 5 to 1500 MHz. These modulations are usually the undesirable result of the 50 or 60 Hz power source and are not necessarily sinusoidal. The unit is calibrated to the SCTE definition of hum modulatio ...more

The Cal-Bay Systems RF Switch Assemblies feature high performance and high reliability in a standard 19? rack-mountable enclosure. These assemblies are ideal for RF test systems and general-purpose automated test equipment (ATE) systems where one instrument channel must be used to measure multiple test points. ...more

Advanced Test System. The VTS-2000 is a fully integrated, turnkey system designed to address your functional testing needs. The standard VTS-2000 test system includes a 10MHz arbitrary Function Generator, 200MHz Universal Counter, 61/2-digit DMM, 250MHz Digitizing Oscilloscope, 8x32 Relay Matrix, 32 Channel Power Switch and 8 programmable DC power ...more

The Model 1260-51 is ideal for high performance RF switching. Its 400MHz bandwidth makes the 1260-51 an excellent switch module for medium-speed digital, datacomm and most analog signals.  ...more

The SMP6100 series of high-density RF switch modules is designed for high-fidelity RF switching applications up to 1.3 GHz. Excellent crosstalk and isolation is maintained by using RF relays with bandwidths in excess of 2.0 GHz, along with short low-loss coaxial runs from the connector directly to the relays. ...more

The 30-728 is a dual 8 x 9 RF Matrix Module suitable for switching frequencies to beyond 400MHz.The 30-728 is available in either 50Ohm or 75Ohm versions with a choice of coaxial connectors. ...more

The 30-728 is a dual 8 x 9 RF Matrix Module for switching frequencies to beyond 100MHz. Built-in relay self-test gives maximum switching confidence with early failure warning ...more

RF Switch Matrix. The CA5551 Switch Matrix is configured to drive forty-eight handoff receivers and a single search receiver from any one of four antenna inputs.(Other input output configurations available Contact factory) The Search Receiver or each Handoff receiver can select any one of four antenna inputs, in any combination  ...more

Based on Quintech's SRM Series of modular RF switching systems, the SRB 2000 was developed specifically for deployment in the test laboratories of advanced AMPS and PCS wireless systems. The SRB 2000 is capable of routing any RF signal between 800 and 2170 MHz simultaneously and bi-directionally (full duplex). This allows any number of 16A ports to ...more

Available with either 15 Vdc or 28 Vdc actuator coils, these DowKey INTELLIGENT RELAY IN-LINE Series SP12T Multithrow Switches are available with internal binary decoding CMOS logic circuits with latching self cut-off drivers. The IN-LINE construction has the common port in the center of the RF cavity to provide excellent electrical performanc ...more

Wideband Receiving non blocking full fanout RF Switch matrix frequency 30 to 1100 MHz with 2 to 32 inputs and 8 to 256 buffered outputs with high 2IP and 3IP Performance and low noise Control is provided by TCP/IP ...more

The CA5554 is designed to switch the signals from a number (n) of HF Antennas through a non-blocking full fan-out switching matrix in a multiple HF receiver system. Providing a number (n) of receiver outputs, each of the receiver outputs can select all of the inputs.  ...more

The Pickering Interfaces 30-750 series provides a range of high performance 8 x 4,Dual 8 x 4,8 x 8 and 16 x 4 RF Matrix Modules with a bandwidth to over 1500MHz plus built-in expansion capability to beyond 768 crosspoints in a 13 slot VXI chassis. ...more

Wideband Receiving non blocking full fanout RF Switch matrix frequency 1.8 to 30 MHz with 32 inputs and 64 buffered outputs with high 2IP and 3IP Performance and low noise Control is provided by TCP/IP.  ...more

The AS212-93 is an IC FET 4 x 2 matrix switch in a low cost TSSOP-16 exposed paddle plastic package. The exposed paddle should be grounded. The AS212-93 enables 16 states directing any of the four inputs to any of the two outputs. DC block capacitors are required at each RF port. States are selected by 4 positive controls. All ports are absorp ...more

IF 120MHz wide non blocking full fanout RF Switch matrix frequency 80 to 200 MHz with 128 inputs and 128 buffered outputs with high 2IP and 3IP Performance and low noise Control is provided by TCP/IP. Housed in standard 19 inch 41U Racks ...more

The 40-877 is a 50 Ohm 2x2 RF matrix available with 1 or 2 banks in a single PXI slot. Loop-thru connections are provided on both the X and Y axis allowing the attachment of terminations for unused signals or for expansion to other matrices. Larger matrices are easily built with varied X and Y dimensions, such as 8x2 and 4x4 using multiple 40- ...more