Pressure Sensors

Model 6036 is a four-channel, programmable charge amplifier, filter and digitizer with a second input for piezoelectric sensors with integrated electronics (IEPE). The high-performance charge amplifier can be used to measure dynamic acceleration, pressure, force and strain from piezoelectric transducers. Two charge-to-voltage input ranges opti ...more

Board level, or PCB-mountable, pressure sensors use piezoresistive silicon die technology and are suitable for air or non-corrosive gases for pressure ranges from 1 to 500 PSI. Sensor packages include dual in-line, TO-8, TO-5, and disposable blood pressure sensors. ...more

Model MC6 Multi-Cal Benchtop Calibrator performs a wide variety of simple and complex pressure based measurement, test, and calibration operations. Modular sensor design allows user to select pressure measurement range for application flexibility ...more

The PMP410 provides performance and economy for a wide range of OEM applications. They are especially suited to applications subject to severe mechanical shock, vibration, and electromagnetic interference. Typical applications include hydraulics and pneumatics, compressor controls, pump protection, refrigeration and air conditional systems. ...more

The SmartReader Plus 4 LPD (Low Pressure Differential) logger is a two channel logger with internal pressure and temperature sensors. The low pressure sensor is built into the logger and is capable of measuring low gauge and differential pressure. ...more

The Micro SV&T offers time-of-flight sound velocity measurement with next generation, composite material sensors. On-board temperature and pressure sensors allow the user to map sound velocity by depth while verifying thermocline effects. ...more

FUTEK?s Force Sensor are designed for measuring force, pressure, and displacement. These sensors are a cost effective and reliable OEM solution for high volume applications. The FBB300 Force Sensor incorporates the balancing, compensating and conductive elements into its strain gauge which is laminated on to the 300-Stainless Steel flexure ...more

The Micro P is a highly accurate pressure sensor contained within a pressure housing with a 33mm diameter. The instrument is ideal of depth control on AUVs, ROVs, or other underwater platforms. 25Hz sampling makes the Micro P an ideal alternative for objects moving rapidly through the water column. ...more

The PFP300 Pressure Plug Sensor is FUTEK?s OEM Pressure Sensor solution for high volume applications. Utilizing metal foil strain gauge technology, the PFP300 is made from 17-4 Stainless Steel, weighs 2.5 oz, and it has mV/V output range as a standard and amplified VDC or 4-20mA per request. This product line is manufactured in USA. ...more

These robust semiconductor strain-gauge type pressure transmitters are packaged along with temperature compensation circuitry and signal amplifiers in a weatherproof enclosure. The transmitter provides a voltage signal that is analogous to the pressure applied to its sensor. ...more

The PFP350 Pressure Plug Sensor with cable is FUTEK?s general Pressure Sensor solution for a variety of applications depending on the specifications required. Utilizing metal foil strain gauge technology, the PFP350 is made from 17-4 Stainless Steel, weighs 5.5 oz, and it has mV/V output range as a standard and amplified VDC or 4-20mA per requ ...more

The pressure probe system enables testing of pressure sensors and any devices that may need to operate in a different gas atmosphere or at a different humidity. Instead of packaging the device and then testing for bad dies, the pressure probe system tests at wafer level before packaging. This reduces manufacturing costs and time to market. ...more

Reflex and gap sensors, pressure transducers  ...more

Barometric pressure is sensed by an integrated silicon absolute presure sensor with internal temperature compensation. The sensor is mounted to the signal conditioner board. A 3/16 inch diameter tube may be attached to the sensor to provide remote pressure sensing. The output of the sensor is scaled to provide the desired output signal. ...more

High pressure accuracy (± 0.025% F.S.). Up to 2 internal pressure sensors. External pressure modules. Large graphic backlit display. mV, V, and mA (active and passive loop) measuring and simulating for TRX calibration. Temperature with RTD for flow  ...more

The temperature pressure calibrator provides pressure measurement flexibility over any competitive unit. It provides 0.025% FS accuracy on both internal, isolated and stainless steel pressure sensors. ...more

The PFT510 Miniature Flush Mount Sensor/Cable Version is FUTEK?s general Pressure Sensor solution for a variety of applications depending on the specifications required. Utilizing metal foil strain gauge technology, the PFT510 is made from 17-4 Stainless Steel, weighs 25 grams, and it has mV/V output range as a standard. This product line is m ...more

These conductivity cells have extremely high temperature andpressure ratings: the threaded types can handle 16 bar at 200°C and the flanged types can handle 40 bar at 250°C ...more

In this configuration, the CTD Plus is perfect for vertical profiles of the water column. The pressure sensor accuracy is 0.05% and can be upgraded to 0.01%FS. The sampling rate has been increased to 25Hz. The aluminium housing provides strength and protection from knocks and shocks ...more

The PFS980 Semi Flush Mount Miniature Pressure Sensor is FUTEK?s miniature Pressure Sensor solution for various liquid environments. Utilizing thin film technology, the PFS980 is made from 17-4 Stainless Steel, weighs 50 grams, and it has VDC and 4-20 mA output available.  ...more

The BetaGauge 301 Single Sensor Pressure Calibrator is a general purpose value oriented pressure calibrator. With one internal pressure range and an available adapter for external BetaPort-P pressure modules. ...more

The EMP 2000 is a field proven instrument capable of monitoring a wide variety of water quality parameters. The EMP-2000 comes standard with conductivity and pressure sensors, and can support as many as 10 additional sensors (see Sensor Information for the list of available sensors). The instrument is capable of deployments to 300m.  ...more

The Agilent 10751D environmental sensor measures air temperature and pressure. The sensors, used in VMEbus and PC-compatible laser interferometer systems, detect and automatically compensate for operating environment changes. The 10751D includes a 15-meter (49-ft) cable.  ...more

Excellent stability provided by silicon resonant sensor. High accuracy ±(0.05% of full scale). Offset monitor function to present deviation from final value ...more

The Agilent 10751C environmental sensor measures air temperature and pressure. The sensor, which is used in VMEbus and PC-compatible laser interferometer systems such as the Agilent 5529A/55292A calibration system, detects and automatically compensates for operating environment changes. ...more