Power Sources

The ANSI-95 16-channel Zebra II is an excellent baseband W-CDMA and Multi-tone source to test power amplifiers as per IS-97. Sixteen data-encoded CDMA channels are digitally combined with a user selectable mixing ratio. The combined output is band limited with digital and analog filters and output as ANSI-95 baseband I and Q signals with > ...more

The Fluke 5520A Multi-Product Calibrator sources direct voltage and current, alternating voltage and current with multiple waveforms and harmonics, two simultaneous voltage outputs or voltage and current to simulate dc and ac power with phase control, resistance, capacitance, thermocouples and RTDs. ...more

Provide visible laser source. Perfect helper for OTDR. Be suitable for SM, MM types of fiber. Adapters supporting different ports (FC,ST, SC). Test fiber curve & break faults.  Low voltage warning, automatic power off and energy-save design. Small size, simple button operation ...more

The PWS1000 Series of power supplies provides 12, 24, or 48 Volts DC at 1000 Watts of continuous power from a 110 or 220 Volt AC source. Analytic Systems' power supplies use Switchmode technology with powerful IGBT switching transistors for reliability and efficiency with minimum size. Circuit innovations reduce output ripple to levels previou ...more

GAO08611 Handheld Optical Multi Meter integrates both optical power meter module and optical light source module which can implement loop-around test by using both modules , and also can work individually by function switch operation in the menu . It is specifically designed for technical support personnel to take tests on a variety of instruments ...more

The NPRT 2200 performs Noise Power Ratio measurements to determine the dynamic range of optical transmitters, amplifiers and other active devices used in HFC networks. It has an internal broadband noise source, selectable filters and a measuring receiver. ...more

GAO08612 handheld optical multi meter is an upgrade version of GAO08611, it integrates functions of both intelligent optical power meter module and high stable light source module which can implement loop-around test by using both modules,and also can work individually by function switch operation in the menu.Perfect combination to make your fiber ...more

LP-236 Handheld Optical Multi Meter integrates both optical power meter module and optical light source module which can implement loop-around test by using both modules,and also can work individually by function switch operation in the menu.It is specifically designed for technical support personnel to take tests on a variety of instruments with a ...more

FCST08612 handheld optical multi meter is an upgrade version of FCST08611, it integrates functions of both intelligent optical power meter module and high stable light source module which can implement loop-around test by using both modules,and also can work individually by function switch operation in the menu.Perfect combination to make your ...more

The Model 2430 1kW Pulse SourceMeter offers the same DC source and measurement ranges as the Model 2425 100W SourceMeter, plus a unique 1kW pulse mode that extends the upper current limit to 10A. This mode makes the Model 2430 ideal for measuring the breakdown voltage of many types of high-power devices, including multi-layer varistors (MLVs) ...more

Designed to safely check voltage and/or ground on several electronic systems, including wiring, fuses, battery, cabling, sensors, switches, and more. Features ergonomic grip design for comfort and safety. Connects using a cigarette lighter / power plug and detachable twin alligator clamps. 6-foot leads provides long reach connection. Unique tr ...more

Tests batteries, alternators, regulators, and starters. Direct-from-battery tachometer feature gives RPM readings without complicated hookups to ignition system. Also, ammeter/voltmeter capabilities. Evaluates discharged or charged batteries in one minute. Tests all 12-volt automotive and heavy-duty batteries with cold cranking amp ratings of ...more

Noise Com's NC346 Series waveguide is designed for narrow-band high ENR noise figure measurement applications. For high power waveguide systems the series has an optional built-in isolator to provides very low VSWR and superior flatness, typically <= +/- 1.5 dB. ...more

In-Bay Power Filter (IBPF) modules and systems designed specifically for applications where Network Equipment (NE) is powered in a Central Office (CO) environment. The IBPF module provides the NE with a filtered DC power source which is protected against voltage interruptions as caused by up-stream fuse or breaker tripping and DC noise sources. The ...more

The FSM150Xe fast-switching monochromator (100nm in <1-6ms) was purposely designed for use in fluorescence and spectroscopic imaging. The design of the continuously tunable (280-700nm) light source maximises the optical power available from a75W xenon lamp producing up to 5mW in 12nm bandwidth. ...more

The Eigenlite RS-5A linear programmable digital light source provides a versatile way to test and characterize CCD, CMOS, and other image sensors, cameras and detectors. The RS-5A is a larger aperture, higher power version of the original RS-5 digital light source. The RS-5A also includes a number of other enhancements and functions previously ...more

The Model 8850-2 Power Sweep Generator was developed in response to the demand for increased audio voltage from a low impedance source when performing CS101 conducted susceptibility test per MIL-STD-461D and E. This high power unit is especially suited for rapidly making tests in the shielded room. ...more

Meter Test Station for 20 measurement positions, reference standard 0.05%, electronic power source with 600 VA, IEC62056-21 communication capability ...more

The 3205 adds a left element current source to all the features of the 3204. Smart Socket™ technology will automatically sense the meter and clamp it in place. Use a barcode scanner to scan the meter label or manually enter the meter information and let the 3205 do the rest. The 3205 will route the voltage to the necessary positions supplying 120, ...more

Multiple output benchtop Power Supplies. NGT models combine three independent voltage sources in one unit. A switchable panel meter is provided for each output. The 20 V, 25 V, 35 V out-puts can be used separately, in series or parallel connection or in tracking mode. The independent 6 V output with its load rating of 5 A is especially designe ...more

The 35PS power supply is designed for use with the 300 series family of DC-powered instruments. It features compact packaging and supports high-density mounting on DIN rails. The output is diode-coupled, allowing supplies to be connected in parallel, for additional current capacity or for systems requiring automatic power source redundancy. Two ...more

The LP-IP and LP-IL current transducers convert an ac current input into an output signal which is proportional to the rectified arithmetic mean of the input. Accurate measurement assumes a sinusoidal input waveform. Power for the units is derived from an external source. ...more

The VTS-6000 Model 20 is a modular, self-contained Aircraft Maintenance and Configuration Support System using E Tools. It provides network connectivity, power, storage, and transportation of E-Tools, used by aircraft maintenance personnel. Any combination of up to 12 (laptop size) or 24 (hand held) rugged E-Tools plus a battery and accessory drawe ...more

Portable light source with red focusing beam for viewing in dim to dark areas. Designed for minimal disturbance to others. Powered from phantom power of lithium battery. Xlr male output. will also test for presence of phantom power. ...more

Programmable Triple Power Supply. Insensitive to RF voltages radiated by device under test or nearby antenna. Simultaneous readout of nominal and actual values of all channels. Coupled protection mode for DUTs which should not be supplied from an asymmetrical voltage source. Software calibration via IEC/IEEE bus without potentiometer adjustmen ...more