Photovoltaics

ZYGO's NewView 3DPV-W uniquely measures 3D cross-sectional area (CSA) providing you the information to optimize both optical and electrical efficiency in on-line and off-line applications. ...more

The battery powered portable cetisPV-CT-F1 is a PhotoVoltaic Curve Tracer for field measurement at solar systems. The capacity of the battery ensures a measurement period of approx. 8 hours under normal conditions. ...more

cetisPV-CT-L1 is a Photo Voltaic Curve Tracer for Laboratory or production applications. As a stationary device it measures the I/V-curves of photovoltaic cells and modules in a wide range fitting to customer needs. Outstanding features of the cetisPV-CT-L1 are the high precision layout of the electronic section, measurements in 2- or 3 ...more

VS-6810 portable I-V Curve Tracer measures the I-V characteristics of Photovoltaic (PV) cells, module, and Array. It has a very wide Voltage range: 0V to 200V, and current rage from 0.1A to 10A; resolution: 0.01mA ...more

This unit measures I-V properties of the photovoltaic cells and modules.  This unit equips 3 measuring amplifiers which move fast in parallel and is available to measure value of the current of monitor cell and also values of the current as well as the voltage of sample simultaneously. ...more

This solar simulator system has been developed for evaluation of properties of photovoltaic modules. Consisting of a light source unit, a sample stage, and a measurement/data processing unit, this system irradiates light which is similar to sunbeams in spectral distribution and in intensity, over a 1500mm쳌~1200mm area for 80-800mseconds. ...more

Spectra-Nova's SS Series Solar Simulators (Module Testers) are designed to be used in production or development environment for solar photovoltaic modules. Our product solutions combine ease of use with cost-effectiveness as well as minimizing operator intervention: Spectra-Nova's SS Series Solar Simulators (Module Testers) are designed to be u ...more

SOLAR200 is a innovative meter designed to perform all safety test verifies on each type of photovoltaic plants in compliance to recently standards (VDE0100, BS7671 etc..). The meter it's very easy to use and have a wide number of internal features which are selectable by using the multilanguage menu. The meter permits, moreover, to start principa ...more

QuickSun 700A Large Area Simulator is capable of measuring the IV characteristics of even the largest size photovoltaic modules whether they are made of thin film or crystalline material. It is effective and reliable both in production and quality control applications.  ...more

The IP-OptoISO-16 is an IndustryPack Module with 16 optically controlled FETs [switch]. Each FET acts as a single pole normally open photovoltaic relay. The solid state approach has several advantages including bounce free operation, low on resistance, long life, fast switching, and higher reliability when compared to relays.  ...more

This photovoltaic reference cell is a radiometer used for measuring illumination levels when assessing the performance of photovoltaic devices. By quantifying the amount of light reaching a test device, it enables the light-to-electricity conversion performance of solar cells and modules to be measured and compared. ...more

SOLAR300 carries out all the recommended tests to check the performances of single and three phase photovoltaic installations. SOLAR300 measures output DC power of the cells, output AC power of the inverter, solar radiation and temperature of the cells. ...more

The LS-100 grating spectroradiometer is specially designed for use in measuring the spectral irradiance of solar simulators that are used for the measurement of photovoltaic cells. ...more

These systems can measure a wide variety of photovoltaic devices, including p-n junction and dye-nanocrystalline solar cells (DSSCs). All systems include a light source, monochromator, filters, and reflective optics provide monochromatic light to a photovoltaic device while a broadband bias light illuminates the test device to simulate end-use cond ...more

The Dyesol UPTS is a complete package for real time testing and analysis of PV cells or modules. A set of equipment that allows for testing of any photovoltaic device from single test cells indoors to panel sized devices outdoors - from one device up to 13 devices. ...more

We produce a line of photovoltaic (PV) test instruments. Our I-V Curve Tracers have become the standard used by module manufactures, research facilities, and electric utilities for measuring PV systems. Our tracers are sold by Daystar,Inc. as their DS-Series of I-V Tracers. ...more

Spi-Sun™ Simulator photovoltaic module testing systems feature light sources that closely match the solar spectrum while avoiding the excessive solar cell heating caused by continuous sources. Spire's simulators can test either crystalline or thin film modules and can be integrated into your fully-automated module production line, or operated in ma ...more

The Spire SPI-CELL SORTER sorts photovoltaic cells according to their electrical performance, tested under simulated sunlight. A pulsed xenon lamp with an optical filter provides a close match to the Air Mass 1.5 Global solar spectrum. The spectrum meets the highest International and ASTM specifications (ASTM E927 Class A). The system features auto ...more

The Spire SPI-CELL TESTER tests the electrical performance of photovoltaic cells under simulated sunlight. A xenon arc lamp with an optical filter provides a close match to the Air Mass 1.5 Global solar spectrum. The simulator spectrum meets the highest International and ASTM specifications (ASTM E927 Class A). ...more

The Daystar DS-100C accurately measures the output of photovoltaic modules and systems up to 50 kW. It is rugged, portable, and designed for field use. Daystar Tracers, developed in the late 1980?s, were one of the first portable, self-contained units available for testing installed photovoltaic systems. Daystar Tracers have proven accurate, re ...more

Sample rate (Internal clock): 400MHz asynchronous operation Sample rate (External clock): 150MHz synchronous operation Memory Depth (per channel): 256Kbits Channels: 70CH Upgrade Oscilloscope to measure and decode I2C / UART (RS232C & RS485) / SPI Protocols and mixed signals Glitch Capture Capability: 5ns Bandwidth: 100MHz Data decoding formats: Bi ...more

The field testers of type PVPM enable the measurement of the I-V-curve of photovoltaic modules as well as of strings. By a new developed procedure the device can measure and calculate the peak power Ppk, the Rs and Rp directly at the place of assembly of the PV system. Calculation results and the diagram can be displayed on the internal LCD-display ...more

The Spi-Array Tester 5000 is a rugged, portable system capable of measuring and recording the current and voltage (I-V) characteristics of a photovoltaic module. The tester can measure modules or arrays with output power from 10 watts to 50 kilowatts. ...more