Partial Discharge Test

These systems assure that the devices shipped will meet the stringent specifications of UL and VDE-0083 for isolation testing as well as the VDE-0884 partial discharge specification. Both the 9460 and 9464 systems are available in two basic models:Manual model Fig.1 for sample/lab. Production testing Fig. 2 with interface to automatic handlers. ...more

The DDX 9101 is the effective solution for routine pass/fail partial discharge testing. It has the basic functions of an analog detector and meets all IEC and IEEE/ANSI standards for partial discharge testing. It?s a straightforward replacement for older analog detectors of any make or model. The DDX 9101 simply measures the level of PD and th ...more

Digital, highly advanced, multi-purpose and smart Partial Discharge and Diagnostics System for on-line and off-line PD testing on power apparatus and high voltage insulation systems, for both in-house and on-site applications. ...more

The 9216 is a small battery powered PD calibrator for direct coupling of the generated PD signal to the test object according to the related standards IEC 60270 and IEEE 454.Pulse outputs ranges are 10, 102, 103, 104pC.Triggering of the impulses is realised over external light source synchronisation. ...more

The oscillating wave test system OWTS, available in voltage ratings of 28kV, 60kV and 150kV, is used to identify, evaluate and locate partial discharge (PD) faults in a cable insulation and in joints and terminations.  ...more

The KAL 450 is a battery powered PD calibrator for direct coupling of the generated PD signal to the test object acc. to the related standards IEC 60270 and IEEE 454.Pulse outputs ranges are 5 ? 100pC. The pulse rise time is < 20ns, pulse width < 150ns. A double impulse generator with time lag of 0 ? 200us monitors the superposition char ...more

The oscillating wave test system OWTS is used to identify, evaluate and locate partial discharge (PD) faults in a cable insulation and in joints and terminations. ...more

The oscillating wave test system (OWTS) is used to iden-tify, evaluate and locate partial discharge (PD) faults in cable insulation and accessories in all types of high volt-age power cables. The system consists of a notebook as a WLAN control unit and a HV unit. The HV unit contains a HV source and a resonance inductor with an integrated elect ...more

High voltage probe corona tests are made easy with the Adwel Corona Probe. The Corona Probe is an off-line instrument to accurately locate the exact source of partial discharge (PD) to a particular slot and position in generators and motors. Complete kit comes with PPM-97 peak pulse meter, ferrite probe, ground strap and handy carrying/storage ...more

This advanced instrument is a powerful digital PD detector with a large number of options to cover the two main PD applications:SL type: Optimized for Power Cable PD testing with built-in Site Location hardware and software.XF type: Optimized for Transformer PD testing with additional 3-phase multiplexing hardware and software modules. ...more

The KAL 451 is a battery powered PD calibrator for direct coupling of the generated PD signal to the test object according to the related standards IEC 60270 and IEEE 454.Pulse outputs ranges are 2 ? 200pC and 20 ? 2000pC. The pulse rise time is < 20ns. ...more

The DDX 9121 partial discharge detector is the perfect solution for multi-phase partial discharge testing.The system comprises multiple, rack-mounted PD measuring units communicating with a remote PC, which handles the display of PD information using an advanced data acquisition and remote control software. The PC displays test results, provid ...more

The oscillating wave test system OWTS is used to identify, evaluate and locate partial discharge (PD) faults in a cable insulation and in joints and terminations. The HV unit generates the attenuated oscillating frequency up to the peak v oltage of the system. An Embedded controller for the operation and the digital signal processing and storag ...more

The VLF test and ageing diagnostics at PE / XLPE cables by means of dissipation factor measurement are the criteria, on which the assessment of energy cables can be based. The partial discharge measurement with localisation of the partial discharge source closes the gap in the insulation diagnostics of PILC and assures the assessment of plastic ...more

The oscillating wave test system OWTS is used to identify, evaluate and locate partial discharge (PD) faults in a cable insulation and in joints and terminations. The system can be used for of all types of medium voltage cables. Detailed information of the operational reliability of a cable system can be determined ...more

Partial Discharge (PD) testing is a proven diagnostic method for non-destructive cable testing for many years. Using partial discharge measurement with source localisation, direct allocation of partial discharge activity on cable segments, joints or cable terminations is enabled. ...more

SCHLEICH's testers for stators, motors, generators and coils incorporate the latest technical advances. On the basis of long-term experience and consequent optimization, we supply the user with devices for testing stators and armatures precisely and with clear results. Our compact testers executing resistance tests, surge tests, high voltage tests, ...more

The PDA Premium partial discharge analysis test equipment measures partial discharge damage in the stator winding of rotating machines. It can be used on machines equipped with partial discharge capacitive couplers or High Frequency Current Transformers (HFCT). ...more

Detection of partial discharge in respect to fault location in extra high and high voltage cable accessories; also in unscreened conditions .PD-quality tests on laid cables before putting into operation (on-site) .Continuos or periodic PD-monitoring on laid high voltage cable systems . ...more

Measuring the apparent charge according to IEC 270 ,PD quality tests on high volt equipment ,PD diagnosis on developing insulating materials ,Designed for on-site PD diagnosis tests as well as for manufacturing and research . ...more

The KV50-200 and KV100-100 are high power, high voltage ac test systems designed for insulation testing. These systems are equally suited to both development and routine testing of electrical insulation systems and plant. Each unit is available in either a low partial discharge version or without a specified discharge level. ...more

Measuring the apparent charge according to IEC 270 ,PD quality tests on high voltage equipment ,PD diagnosis on developing insulating materials, Designed for on-site PD diagnosis tests as well as for manufacturing and research ,Meets ICEA T-24-380 for Cable Industry .Maximum detectable apparent charge: > 10 000 pC ; Minimum detectable appar ...more

The SPECcompactcomprises a spectrum analyzer, a partial discharge (PD) detector and an RIV meter in one instrument. This combination enables PD measurements even with a large background noise e.g. in non-shielded test areas. ...more

The ICMcompact Partial Discharge Detector is used for quality assurance and quality control tests of low and high voltage insulation. It can also be used for high voltage cable PD fault detection and location ...more

The DFA100, Dielectric Fault Analyzer, is a handheld and battery powered instrument used for monitoring acoustic emissions. The acoustic emission diagnostic technique is a non-intrusive in-service test used for monitoring acoustic signals produced by partial discharge and loose components. The DFA100 is specifically designed to detect faults i ...more