PWM

GAO S3CEB2410 ARM Evaluation Board is a development platform based on Samsung?s S3C2410X processor. The S3C2410X consists of a 16/32-bit RISC (ARM920T) CPU core, a 16KB instruction cache, a 16KB data cache, MMU to handle virtual memory management, an LCD controller (STN & TFT), a NAND flash boot loader, System Manager (chip select logic an ...more

The model AVT-418 is an Ethernet Interface between a host PC and most of the automotive network protocols used by modules and vehicles now in production. The AVT-418 Interface supports all of these different automotive network protocols: • CAN; 2-wire (CAN-C or ISO 11898) - Ford Motor Company approved. • CAN; 2-wire (CAN-B or ISO 11519). • CAN; Si ...more

The AVT-718 Multiple Interface is a single unit solution for communicating with all of the most popular network protocols found in-use today or destined to be found in tomorrow’s vehicles. It is a complete solution, with no additional boards or modules to buy. The AVT-718 supports the following automotive network protocols: • CAN (2-wire and GM sin ...more

The AVT-716 Multiple Interface is a single unit solution for communicating with many of the network protocols found in-use today or destined to be found in tomorrow’s vehicles.The AVT-716 hardware revision “E” supports the following automotive network protocols: • J1850 VPW • Keyword Protocol 2000 (ISO 14230) • J1850 PWM • GM’s ALDL (8192 UART) • I ...more

NAI offers a variety of PWM Motor Drives and Synchro Booster Amplifers, specifically designed for the rugged-Military and Commercial Aerospace markets. They provide small size, high power-density, high reliability, and rugged packaging  and are available in ratings up to 30 VA. The PWM Motor Drive units offer extensive diagnostics and Bui ...more

Measurements on switching power supplies, AC/DC motors and generators, electronic and conventional transformers, ballasts, PWM frequency inverters, ultra-sonic generators, ferromagnetic core losses, lighting, dielectric barrier discharge lamps, low and high pressure discharge lamps, calibration reference for power and energy. Harmonics and flicker ...more

The J7 drive is a general purpose AC drive; its PWM design provides low motor noise and high starting torque, with a current overload rating of 150% for 60 seconds. V/f control makes this drive suitable for most general applications. The J7 is feature-packed, low cost, and compact. The digital operator includes a 3-digit LED status display. ...more

The G5 Drive 600 Volt produces an output of adjustable voltage and frequency to control the speed of a squirrel cage induction motor. This PWM design provides low motor noise and high starting torque. Current overload rating is 150% for 60 seconds. The drive provides 3 modes of control and speed accuracy to suit application requirements; V/Hz (2%), ...more

8-Channel Pulse Width Modulation Output Module for Compact FieldPoint ...more

25 MHz, 100 MHz or 240 MHz Sine Waveforms. 14 bits, 250 MS/s, 1 GS/s, or 2 GS/s Arbitrary Waveforms. 5.6" Display for Full Confidence in Settings and Waveform Shape. Multi-language and Intuitive Operation Saves Set-up Time. Pulse Waveform with Variable Edge Times. AM, FM, PM, FSK, PWM. Sweep and Burst. Dual Channel Models Save Cost and Bench Space. ...more

Pulse output module for the FieldPoint I/O system - 8 PWM outputs ...more

Maximum reading of 9999. ACA/DCA measurement up to 600.0A Inrush current (100mS) mode, for measuring start current for motors, lighting, etc. Good for PWM trouble shooting and in Noisy environment measurement Improved low current measurement accuracy. Temperature Compensation Current sensor  ...more

Box with cable and OBD Connector. Complete with USB cable to connect the box to any PC. Compatible with ISO-KL, CAN, ISO 9141, VPW, PWM protocols. ...more

The J1850 module supports VPW and PWM including timing analysis and requires the HS+ Interface. ...more

Galil's CDS-3310 is a single-axis controller and drive system for precisely controlling a brush or brushless servo motor. It combines a high-performance, programmable motion controller with a 500W PWM drive in a compact, cost-effective package.  ...more

3 memories. Able to store voltage, frequency and current high limit setting. Utilize PWM technology with switching amplifier design, the efficiency up to at least 80%. Compact in size and light weight. As small as 2U(8.9cm) height for capacity for 500~2000VA ...more

8 channels of independently programmable sine, sawtooth, triangle, and square/PWM/pulse, Gaussian noise, and arbitrary waveform generation. Channel-channel modulation: AM, FM, PM, PWM, and channel summing. Output range 0 to 32 MHz with 0.015 Hz resolution. DC coupled 50-ohm outputs to 20.48 volts peak-to-peak. ...more

iDAQTest&Log 3.1 is a standalone ready-to-run software that can be used to test the iUSBDAQ device (both U120816 and U1208LOG model) and log analog input?s data and read back logged data for basic analysis. With this software, user can browser through all the features in iUSBDAQ, such as read single analog channel, multiple ...more

The Chroma 6400 series Programmable AC Power Source uses state of the art PWM technology to deliver pure, instrument grade AC power at very low cost never achieved before. The 6400 AC power source offers maxi-mum rated power for any output voltage from 0 to 300VAC, at any frequency from 45 to 1K Hz.  ...more

The ElmScan PWM Scan Tool comes mounted in a steel enclosure and can be used with our free software to turn your computer into a sophisticated auto diagnostic system. This interface supports the J1850 PWM protocol used mostly in Ford Corporation and some Mazda vehicles. ...more

Utilize PWM technology with switching amplifier design. 4 groups of digital LED displays - Frequency, Voltage, Current and Power or Power Factor. Programmable high/low limit settings on voltage, frequency, current, power and power factor.  ...more

The LDT-5900 Series Temperature Controllers deliver industry-leading precision, high power temperature control for laser diodes and fiber optic components. These controllers combine a fully adjustable PID control loop with digital PWM output current, ensuring fast, efficient, and precise temperature control from -50°C to +250°C. ...more

Flexibility in displaying test parameters or results in a single screen. Date and Time Setting allows the operator to set calibration due date and alert. Line and load regulation maintains the output voltage within 1% of setting ...more

TESSY is a modularly configurable functional test system meeting the specific requirements for vehicle control unit tests. The system is equipped with vehicle-type and manufacturer-specific configurable communication interfaces (CAN and diagnosis). Their time-critical protocols are controlled by microcontroller-based modules. The on-board soft ...more

TR6080 IC Tester is specially designed for testing Power Management IC. It is ideal for testing regulator, detector, reset, switch, and PWM IC. TR6080 system adopts modular design concept. Currently, there are PVC, OVC, DVC, and TMU for DC&AC parameter measurement, and functional pattern testing AC32 modules for various testing requirement ...more